does anyone know of a way to make this code look for the second instance instead of the first?
res = WorksheetFunction.Match(invvar, Columns(1), 0)
i thried changing the last 0 in the command to a "1" then a "2"
but it still found the fist instance.
How can I perform a custom autofilter operation on the Column A data shown below that will filter out any cell that does not follow a "#.#.#" format. In other words I only want to see Level 3 paragraph numbers that contain two periods and suppress out all the other levels (variations containing 3 or more periods). I tried the following syntax in the custom aotofilter field with no success - "^#.^#.^#"
3.2.1
3.2.1.1
3.2.1.1.1
3.2.1.2
3.2.1.2.1
3.2.1.2.2
I need help to decipher or explain the following syntax picked up at [url] Related to performing Vlookup-Index-Match.
IF(lookup_val=Index(lookup_array,MATCH(lookup_val,lookup_list),1),Index(lookup_array,MATCH(lookup_val,lookup_array), colnum),“notexist”)
The part I don't understand is the "lookup_list" in red above. What is this list?
I know to set up the lookup_array & lookup_value. How do I set up this lookup_list ...?
I am wondering if using an "if" statement or a case statement would be good ways to check two worksheets in two different workbooks to see if their names match? I could use some help correcting my syntax too:
For 1 to ws.count
If Worksheet("one").Name = Worksheet("two").Name
Worksheet("one").Range("A1:G84").Copy
Worksheet("two").Range("A1:G84").Paste
Endif
Next ws.Count
I´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)
Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedI am playing around with the Forfiles command (being called from Excel via Shell)..
I can't for the life of me get it apply a second command (such as getting the file size of each file)..
For example:
VB:
Private Sub CommandButton1_Click()
Dim Z
Z = Split(CreateObject("wscript.shell").exec("cmd /c forfiles /P C:UsersapoDesktopTextFiles /S /M *.* /d
[Code]....
The end result being the filename and the filesize shown..
Excel 2007
I have this simple formula: =IF(SEARCH("ABC",BQ239,1)>0,"Found", "Not Found")
Instead of saying Not Found when the value is not in the cell BQ239 text string I get #VALUE! returned
how do I get it to say "Not Found"? I searching for a substring that can be anywhere in the string.
Im having problem with If/Then/Else Statements Not sure what the problem is. I have a text box a user inputs whatever in to create two new tabs one is the tab name then the next is tab completed. It isnt liking my syntax I have here.
View 7 Replies View Relatedif I copy and Add it created a new workbook not the current on im in. What am I doing wrong?
View 5 Replies View RelatedGetting a syntax error which and I'm not sure what I've done wrong. This is the bit thats causing the problem:
View 2 Replies View Relatedtrying to write a formula in a VB to some cells:
View 3 Replies View Relatedwhat is wrong with this syntax:
View 2 Replies View RelatedI would like to have an email generated when a cell changes to a particular value. I've developed the macro to send the email with a saved attachment.
When I try to OJT-Engineer the text for the module, I can't get it to recognize the macro. It's a syntax issue, it seems.
What I need is for my module to initiate a macro when a cell changes to a value.
This is the code EXACTLY as it appears:
A theoretical question following an empiric result.
For the command “SendKeys”, for instance, take these two lines:
What is wrong with the syntax of this formula?:
COLUMNS(INDIRECT("AverageDemand!$A7:"&A$7))+4
I'm getting #REF errors and I can't work out why...
I have the following code that loops thru and puts the word 'TEST' in column J if column B has a TEXT value of '020'
----------------------------------------------------------------------------------
With Range("J1:J" & Lastrow)
.Clear
Range(.Cells(2), .Cells(.Count)).Formula = "=if((b2)=""020"",""TEST"","""")"
End With
----------------------------------------------------------------------------------
Questions
1) why do I need double quotes "" "" on every argument in the function? Is it because I'm working with TEXT data?
2)I want to use multiple ifs (ie if cell b2 equals '020' OR '030' then put the word 'TEST' in col J). How to change the syntax to do this?
I know this syntax isn't right.
I have a form and a combo box that I want ot fill the items in from cell F22.
Here is my
Sheets(PowerAnalysis.xls).Cells("F22").Value = ComboBox2.Text
What is the best way to get this done? I have searched here and on the web and I can't seem to find any straightforward answers.
I am trying to get the below autofilter working but to no avail, its just putting the text datStart and datEnd in the auto filter, not what I receive in the boxes, see bold line for line in question
Dim datStart, datEnd As Date
Dim strAgent As String
datStart = txtStart.Value
datEnd = txtEnd.Value
strAgent = txtAgent.Text
Range("A4").Select
Selection.AutoFilter
Selection.AutoFilter Field:=4, Criteria1:=">datStart", Operator:=xlAnd, _
Criteria2:="<datEnd"
I thought I saw a thread where someone used AutoFilter as a one liner like
Range("VFILTER").AutoFilter 23, "True"
but for some reason this does not work. The filter is active, but it doesn't pay attention to the field or criteria part.
In VBA Excel 2000 while ODBC connecting to a dbase file:
parameter=" N0011"
...
ActiveSheet.QueryTables.CommandText = Array( _ ...
"SELECT ... & Chr(13) & "" & Chr(10) & _
"FROM ... & Chr(13) & "" & Chr(10) & _
"WHERE (dbase_file.field1=" & chr(34) + parameter + chr(34) & "... & Chr(13) & "" & Chr(10) & _
"ORDER BY ...")
...
It doesn't work any more in Excel 2003. Of course it works directly such as:
"WHERE (dbase_file.field1=' N0011')
but I couldn't find the way to replace the ' N0011' with the parameter.
It is not the singular issue...
"FROM dbase.file dbase.file " that worked well in Excel 2000, the Excel 2003 "wants":
"FROM 'drivepath'dbase_file dbase_file "
and I couldn' find a way to replace the explicit 'drivepath' with a predefined variable.
I am trying to figure out what a past employee's macros do and how they do it. I would simply like to know what the followin syntax enables you to do:
While ActiveCell <> ""
...
...
Wend
or
While ActiveCell. Offset(5) <> ""
...
...
Wend
[Code] ......
I seem to be having trouble with the syntax the number range after (iPopFreqMax).
I am attempting to create a macro that opens a file named "shrinkage-billing.xls", searches for a variable "PTOSH" in column A, copies the adjacent cell and pastes the data in another worksheet named "Shrinkage Report 2009.xls"
The code follows ...
Got a wee problem with some syntax for a copy function. At the moment the code i have copies the range and pastes to another range which is defined by a cell number. But i need it to paste special (values only).
View 5 Replies View RelatedI would like to know where can I find a good resource to learn about VBA syntax. I have VBA books and there are some examples of code in there but when I'm trying to read someoneelse's code I just get into commands or syntax I don't understand. For example I would like to be able to go some site and decifer what this line (or it's parts) means: If(cnt < MAXTEST, sDigSep & String(MAXTEST - cnt, "9"), "")
View 4 Replies View RelatedIs there proper syntax to combine these two lines of code into one line?
View 2 Replies View RelatedI have a variable array, that is, the first cell of the array is variable and the last cell is variable. I have dimmed the first cell , "firstcell" as a range. I have dimmed the last cell , "lastcell" as a range. I'd like to sort the array but first I have to select all cells in the array. Need the proper syntax to select all cells between "firstcell" and "lastcell" in my macro.
View 2 Replies View RelatedI need syntax using SUMPRODUCT. I have these two lines of code
View 2 Replies View RelatedI want to check something syntax wise about IF Statement
My line of code is as follows