I am wondering if using an "if" statement or a case statement would be good ways to check two worksheets in two different workbooks to see if their names match? I could use some help correcting my syntax too:
For 1 to ws.count
If Worksheet("one").Name = Worksheet("two").Name
Worksheet("one").Range("A1:G84").Copy
Worksheet("two").Range("A1:G84").Paste
Endif
Next ws.Count
I am trying to accomplish the following: iterate through rows of a selection, delete row if the first column cell is empty or the second column cell equals 0.
So far I have:
[Code] ........
I am getting a type mismatch error at my if statement.
I thought I had this cracked last month when I ran a set of reports using some code dependent on using advanced filters to first create a unique list to loop through and then to create a list of all entries in a list for each unique entry. The idea being that I extracted all the data for each unique entry in the list and saved that to a new workbook, named after the unique entry.
However, this month I'm totally flummoxed again. I can't seem to get even the first part, creating a unique list, to run.
I have a sheet with several thousand rows of data with maybe 25 columns. I have the following code to try to extract the unique entries in the 2nd column, column B and store them in the same worksheet in column AD, to use when looping through the list.
VB:
With ActiveSheet
.Range("AD1").EntireColumn.Delete
.Range("A1").CurrentRegion.Columns(2).AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Sheet1.Range( _
[Code].....
From the keyboard, if you select a chart with data labels, right click the data labels then "reset the data lables to match style", it works fine; but there appears not to be a programmatic equivalent to accomplishing this same task... at least the macro recorder does not shed any light on the subject. Is there code available to do the same thing?
View 3 Replies View RelatedIs there any way to modify the 1st style under the Light category? I like it because it's the most simple but it won't allow me to Modify or Duplicate. Is there a work around to duplicating/copying it? I've tried manually creating a new style but I can't get it to get the lines fills correctly.
View 2 Replies View Relateddoes anyone know of a way to make this code look for the second instance instead of the first?
res = WorksheetFunction.Match(invvar, Columns(1), 0)
i thried changing the last 0 in the command to a "1" then a "2"
but it still found the fist instance.
I need help to decipher or explain the following syntax picked up at [url] Related to performing Vlookup-Index-Match.
IF(lookup_val=Index(lookup_array,MATCH(lookup_val,lookup_list),1),Index(lookup_array,MATCH(lookup_val,lookup_array), colnum),“notexist”)
The part I don't understand is the "lookup_list" in red above. What is this list?
I know to set up the lookup_array & lookup_value. How do I set up this lookup_list ...?
I have a cell (lets say F4) with the formula "=A3" in it. In cell A3 is text that is partially italicized. I need a way for F4 to populate not only the text that is in A3 but also the font style.
View 3 Replies View RelatedHow do you write an If then statement using a range of cells? I want to construct a logic test using the range of cells A7:A19. I want the logic test to see if the any of the values =1. If the test is true then I want it to display the value in B7:19 (which ever cell corrulates to the cell in column A that has the value of 1) and display the number in the B column.
View 6 Replies View RelatedI´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)
Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................
I am attempting to create a macro that opens a file named "shrinkage-billing.xls", searches for a variable "PTOSH" in column A, copies the adjacent cell and pastes the data in another worksheet named "Shrinkage Report 2009.xls"
The code follows ...
Got a wee problem with some syntax for a copy function. At the moment the code i have copies the range and pastes to another range which is defined by a cell number. But i need it to paste special (values only).
View 5 Replies View RelatedI have another little VBA macro problem that appears to be beyond my coding knowledge.
I have attached a small excel spreadsheet, with a macro recorded (CTRL-P) of what I'm trying to accomplish. Basically, If the data in column A matches a single entry in column F, I need to copy and insert the row (columns F-L) that matches.
[Code] ......
I seem to be having trouble with the syntax the number range after (iPopFreqMax).
just need a hand tweaking the syntax on a names range.
Range 1
=INDEX(Sheet2!$C:$C,5):INDEX(Sheet2!$C:$C,ROW(LRow)-1)
LRow: Is a named active row for the last row. [say row 10]
This named range only selects ONE Column
How can I get it to select TWO columns [ie C & D] as in the example below does. It does it by the last number 2, goes two columns wide?
Range 2
=OFFSET(Sheet2!$C$5,0,0,COUNTA(Sheet2!$C:$C),2)
I can't figure out how to express that in the Range 1?
The following sub to create and name wsheets results naming the new sheet with the value of "A9" only, but what I want to name the new sheet is "A9" + "B9".
Sub CreateWorksheets()
Dim newSheet As Worksheet, itemSheet As Worksheet
Dim cell As Object
Dim itemrange As String
Set itemSheet = Sheets("BIDFORM")
Application.ScreenUpdating = False
itemrange = "A9:B9:" & itemSheet.Range("A9").End(xlDown).Address
For Each cell In itemSheet.Range(itemrange)
If SheetExists(cell.Value) = False Then
Sheets.Add Before:=Sheets("BACK SHEET"), _
Type:="C:PathFile"
Set newSheet = ActiveShee
newSheet.Name = cell.Value
End If
Next cell
Application.ScreenUpdating = True
End Sub
is it possible to write Range("A1:H6") without the string inside the range brackets? i'm trying to do is pass numerical column values into the Range function, and i'd rather not make a mess using the CHR function (CHR(65) = "A", for example).
View 2 Replies View Related I know you can use the syntax range(cells(x,y),cells(z,w)) but for some reason unknown to be the following isn't working:
Set CurrSuppRange = TT.Range(Cells(1, CurrSuppCol), Cells(LastRow, CurrSuppCol))
where
CurrSuppCol = cboxCurrSupp.ListIndex
OurSuppCol = cboxOurSupp.ListIndex
LastRow = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value).Cells(Rows.Count, "A").End(xlUp).Row
(each return integer values)
Set TT = Workbooks(lbWkBkName.Caption).Worksheets(cboxWorksheet.Value)
(tested and works fine)
B1=Name of WorkSheet
B2=Name of 2nd Worksheet
I am trying to write a sum formula using Indirect so that the end-user can enter the names of the sheets in B1 & B2 (the values are always in cell F5 on each sheet). I thought this would work but it is throwing a REF# error.
=SUM(INDIRECT("'"&B1&":"&B2&"'!F5"))
with some added spaces for clarity:
=SUM(INDIRECT(" ' " & B1 & " : " & B2 & " ' ! F5"))
I have the following code to transfer data to another sheet, but there are 2 issues with it:
1. I want to just paste the values, but every code I have tried has had object or syntax errors that can't seem to be fixed
2. If I run the macro a second time, it overwrites what was pasted the last time the macro ran. My code looks like it should look for the next empty row in the range, but it doesn't seem to do that.
What is the correct syntax to do the above. Here is the code:
Sub Update()
Dim c As Object
Dim rngA As Range
Dim cc As Object
Dim rngAA As Object
'Check every cell in the range for matching criteria.
For Each c In Sheets("OpenGen").Range("F9:F208")
[Code] ..........
This line fails, is Method Range Global error.... What is wrong w/ this, and how should it read?
If Range("D", i).Value = "Need Parent" Then
2nd Question- The following line is my normal method in doing a simple For Next Loop. What is the difference between using this one, looping through the cells and the first one referring to a Range for the loop?
If Cells(i, "D").Value = "Need Parent" Then
I would like to do is develop a stand alone program in Visual Basic ( not in Excel VBA) to update the price file in our Portfolio system automatically using the downloaded Excel format file csv extention file from the BigCharts. But before that, I need to export the *.pri file from our Portfolio system in to Excel which still saves as *.pri extention. Then once it updates, I import the updated *.pri file back in our Portfolio program. I understand that the Excel VBA code can be incorporated in Visual Basic code provided there is an object declaration for Excel file (In this case eventhough the both files are in Excel format, they don't have xls extention). how to use external files and Excel VBA code in Visual Basic?
Below is the code that I currently have in Visual Basic. What I'm trying to accomplish is using the ticker (eg. msft) as a keyword search to look up in the price file. If found , the price of that ticker from the test.csv file will be copied in to the price file which is test.pri. I haven't ran it yet.
Sub UpdatePrice(BigChartPath As String, BigChartName As String, AxysPricePath As String, AxysPriceName As String)
'Below are Excel VBA codes
'Uses the test.csv to look up tickers in test.pri and update the price in it
Dim PriceFile As Workbook, BigChartFile As Workbook
Dim PriceFileSheet As Worksheet, BigChartSheet As Worksheet
Dim MaxRows As Long
Dim PriceFileRow As Long
Dim BigChartRow As Long
Dim BigChartFound As Boolean
Call CheckBookOpen(BigChartPath & BigChartName)
Call CheckBookOpen(AxysPricePath & AxysPriceName)
Set BigChartFile = Workbooks(BigChartName) 'Big Chart website imported CSV file saved as test.csv...............
I created a style for a row that has titles in the first column, and numbers in all of the columns (in the same row) However, when I copy the style to another row it applies the style from the first cell. Is it possible for the style to copy the row style, cell by cell? (like pasta formatting?)
View 5 Replies View RelatedI'm working on a workbook that will track staffing patterns.
The workbook has three worksheets: Sheet1 "RCS", Sheet2 "HCT' and Sheet3 "Hidden". I've attached the workbook to this thread. The password for the form is "j".
On Sheet3 "Hidden" I have two tables that are set up to collect the SUM of columns on Sheets1 "RCS" and Sheet2 "HCT". I'm finding the SUM of each range by way of the background color. I've set up the following formulas and when the "data collection tables" are in the same worksheets as the original information, the formula's work perfectly:
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] ........
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] .......
I have two more functions that aren't working due to the fact that the source values are percentages and NOT plain numbers. The above functions work great for SUM but not for percentages. EXAMPLE--Let's say, 3 sub percentages it gives me the SUM of the 3 percentages (i.e. 85% + 100% + 100% = 285% instead of giving me 95%.
[Code] ........
How might I use the following functions to find the average of the source fields instead of the SUM?
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies View RelatedI am very new withe macro I recieve every day a CSV file from our supplier withe a list of the products that got updated withe new price, stock count, product ID etc.
I have my own worksheet with the product ID that we use, and I want to finde the exact match to my product ID in that CSV file and delete all other that don't match.
But i need them get deletede by rows thos product ID that dosen't match to my workbook.
I tried with this, so it could set an X in front of my match then i could filter and copy it to my workbook but it dosen't work:
Because the same product ID is sometime in 100 rows and the X come only in front of one of them.
=IF(ISNA(MATCH(Q2:Q1000;G$2:G$1000;0));"";"X")
so with some macro. I need to have every row deleted that don't match to my list of product ID.
I have 2 worksheets named sheet1 and need_to_delete that are in the same format: 7 digit number, 5 digit alpha numeric, text, dollar amount. I need to copy every row into sheet2 where there are no matches in the column A of the two source worksheets, and copy every row that does have a match in column A into sheet 3. I also need to keep the rows in their current order.
View 5 Replies View RelatedI know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View RelatedI have tried to reset the cell reference style back to A1 from R1C1 (Tools-->Options-->General tab-->uncheck R1C1 reference style), but when I close Excel and reopen it, the reference style changes back to R1C1 style. When I make the change I described above using the Options feature, it changes it for the current file and saves it with the file. When creating a new file in the same session, it keeps the A1 reference style, but when I close Excel and reopen it, it returns to the R1C1 style. Any ideas about how to return to the default A1 reference style for the next Excel session?
How to set macro shortcut for toolbar items which do not have a shortcut already like the "," style button which converts 12000 to 12,000
View 6 Replies View Related