I have over 6500 rows of data. In Columns A through C for each line I have data for boys name, and then similar data for the girls' name on the same line in columns D through F. I have inserted a blank line after each of the more than 6500 lines because I need to move the data in columns D through F down to the next line and over to columns A through C.
View 2 Repliesi need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI have an array, let’s say B1:D20. I would like to be able to manually select any cell within this array and then run a macro which will place the contents of the selected cell into the cell in column A in the same row as my selection.
View 3 Replies View RelatedI have a spreadsheet with a serial number is row 1 in column A with the rest of Row 1 empty. Column A is empty in Row 2, but has the data associated with the row above in columns B through L of Row 2. Then comes 2 blank rows and the pattern repeats with a new serial number in column A of row 5 and so on. I would like to move the serial number down one row, delete the now empty first row, delete the following 2 empty rows, and then loop to do the same thing again for all 9000 rows of the spreadsheet.
View 2 Replies View RelatedAttached is a document, column C & F highlighted in green are areas that users will input data. I need to create a button (top left of spreadsheet) that when pressed moves both the data from column C & F up into the box above. The top set of dates would be deleted and the dates from Trip 2 would move up into the Trip 1 position, Dates from Trip 3 would move up into Trip 2 position and so on.
View 2 Replies View RelatedI thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedWhen I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
I have attached a workbook stating my problem.
file1.xlsx‎
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]
I am in the process of reformatting an excel workbook to act as a review tool for different factors in a process. Part of my redesign includes the use of coding that creates different cell colors based upon the cell contents. The new workbooks will be used to handle existing data for this year. I have developed a process macro to open an existing workbook and copy and transfer the original data worksheet into the newly formatted workbook. The data gets transferred to the new worksheet and the resulting workbook is renamed and saved, Heres'' the rub... the newly saved workbook is missing all of the coding for the worksheets... apparently this is a MS bug.
Has anyone figured a workaround for this. One thought I had is to open both( new and old )workbooks and rather than move/copy , i would transfer the data using cell references.
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedI get a report each day with a list of issues. the "group" that works the issue and the "priority". Based on these two factors, i need to do a double lookup (vlookup?) to another tab or file to match the priority and group and see what value should be brought back for each lines results. For example, if group1 had a prority3 issue, the lookup would find the value from the other sheet or file and bring back the value and put it at the end of the row where the formula is.
Attached are examples of the sheets.
sheet1.jpg
sheet2.PNG
we have a Excel 2010 worksheet containing multiple tables.
Table1
ColumnA ColumnB
1 Blue 12
2 Orange 14
15
11
3 Red 10
Table2
ColumnA ColumnB
1 Blue 11
2 Black 13
15
11
3 White 10
19
17
On a separate worksheet we want to calculate with the first worksheet's values.
For example: Calc1: Sum ColumnB IN Table1 WHERE ColumnA = Orange
How do we do such a calculation/formula?
I am trying to find some VBA that will allow protected cells to be updated when a user enters or selects data in other cells.
For example:
Cell 'A1' starts out blank.
Cell 'B1' has a drop down to select specific items.
Cell 'C1' is the date of the order and is a locked cell.
Cell 'D1' is the date of completion and is a locked cell.
The worksheet is protected to prevent direct changes to cells C1 and D1.
If a user enters any information in A1, then C1 displays the current date.
If a user selects 'Complete' from the drop-down list in B1, then D1 displays the current date. Both of these actions are independant of one another. This format is the same for every cell in the 4 columns indicated above. I thought I was able to do this in another spreadsheet I created a year or so ago but I have not been able to figure out what I did and I do not have the spreadsheet to look at.
I am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
How to Lock/Unlock an Excel Cell Based on the Contents of Another Cell?
View 1 Replies View RelatedI'm trying to set up a dependent cell (B) based on what is in the independent cell (A)
If A is blank, B should be blank
If A has any value other than X, B should display a set string Y
If A contains X, B should contain a drop down list with a range of choices.
I've tried setting it up as a dependent validation cell and I've tried using OFFSET, but the best I can do is to get three different drop down lists to populate cell B. One with only string Y, one with only a blank, and one with the range of choices. The problem is in the first two cases above, I want the cell to fill automatically with either blank or string Y -- I don't want them to just be drop down options, with the cell displaying the last value that was input.
How, via VBA, would I add a comment from a userform (text box name: txtReason) into a cell that may already have a comment in it? I would like to keep the comment that is in the cell and then have the program add a "/" and the next comment from txtReason..
(using excel 2010)
I am creating a macro to automate data analysis for work, but I've become stuck.
I need to find the coordinate of the first cell in a column with word "reserved" or "extended" contained in the cell, and then assign the row number of that coordinate as a variable to use for moving data around. Basically, I want something like VLOOKUP, but instead of returning a value, I want it to return the coordinate.
I am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
Recently I have been practising writing my own macros in VBA. I am using Excel 2010.
I have been trying to write a macro to look at two columns in a worksheet (say, columns D and E) and to delete the contents (not the formatting, and I don't want to delete the cell itself) of that cell only if it contains a numerical value (e.g. 1, 2, 256 or any other number). If it finds a cell with letters, then it wouldn't delete the contents of the cell. The cells are currently formatted as "currency" cells.
I have been trying all sorts of things and I just can't get it to work. I can write a macro to clear a range easy enough, but I am stuck on getting it to delete the right stuff. I won't embarrass myself by uploading the code that I have been using..
I am a financial administrator & every month I have down load 4 bank accts as CSV, import into xl & code (CACode) the amounts for our accountant. I have VBA that formats, adds headings & formula etc but I have a problem/s. In H col I place CAcode & I use a sumif formula in I col to sum all the amounts with that have the same CAcode. For simplicity sake I copy the sumif down & then sort H col ascendindingly (this is done by VBA). Now I am trying write a macro to clear the contents of the cell in I col
if eg h60 = h59
then I60 clearContents, Select h59
Else select H59
Do until H3 is selected
Psuedocode
Select table (A2:I Xldown)
Sort Table by CAcode (H Col)
Set Range as H3:Xldown
Select Last cell with CAcode (Xldown) in H col
For every cell in Range (H3:Xldown)
Use If/thenIf Last cell = 2nd Last cell (H Col) then
Clear contents of I col (last row)
select 2nd Last cell (H Col)
Else 2nd Last cell (H Col)Next Cell
I have to use Xldown to select range as the range will be variable each month & for each bank acct. I need to clear contents of cell to verify that all the sub-totals of unique CAcodes of the CAcoded amounts = the totals Because I may have up to 120 rows X 3 bank accts I am slowly using vba to do my work.
Sub sort_And_delete_Sumif_amounts()
Dim r As Range
'Select range to sort
Range("A2:I98").Select
'Sort CAcode in H col ascendingly
Selection.Sort Key1:=Range("H2"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
'select range for comparisomn of CAcode
Set r = Range("H3", Selection.End(xlDown))................
I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
I am working on a database and trying to remove duplicates. When there are duplicates, I want to take the contents of one cell and copy them as a comment on the cell above (or below).
I tried to work on a small macro to do so, but the contents of the cell cannot be copied (it comes out as a blank).
The long way is to 'double click' in the cell, Ctrl+A, cut, click the cell above, Ctrl+F2, paste. This way is very long as I have thousands of duplicates.
I have a 700 line spreadsheet and would like to delete the cell next to another cell if it contains a certain string. I.e if A1 to A3 equals "Test" then i would like to delete the contents of B1 to B3, But if A2 equals "Completed" then only B1 and B3 should be cleared.
View 4 Replies View RelatedI have values in a number of cells. Next to them, if there was a value, regardless of what the value is, except blank or zero, i would like the cell to turn blue and if possible have a 1 in the cell.
I've used the conditional formatting, however, among the options, 'less than' is the closest to to getting the color right. The issue is that if the cell has nothing in it, it still colors the corresponding cell blue; because it is not less than the already blank cell. If it is blank, I don't want it to color the cell.
I have data arranged in cells A1 to Z1 as Name1, Amount1, Name2, Amount2, Name3, Amount3, etc. Is there a formula that can determine the name that corresponds to the maximum amount in the row?
View 7 Replies View Relatedie:
Cell A1 = Ref#01
Cell B1 = A1&(whatever I choose to type)
Result in cell B1: Ref#01whatever I choose to type
Looks like I would need a macro because a function will be overwritten as soon as I start typing in cell B1.
I want to display the contents of cell B5 in A7 by using cell C7 to show the location of the cell to be displayed. Cell C7 has a formula that shows the cell location of information (text) that needs to be displayed. How can I show in A7 the contents of cell reference shown in C7? In figure attached I show an example to better understand. Want in A7 to show the contents of B5 by reading what is in C7. So A7 cell should show word Road.
View 3 Replies View RelatedHow can you access a cell's value via a vb variable that contains the cell's address. I have a vb variable named cellAddress (string) that contains "$A$1" and I want to assign the contents of what cellAddress points to another VB variable - how do i Do this?
e.g. if cellAddress = "$a$1" and A1 contains "xyz", I would like to assigne "xyz" to a new vaiable by referencing just cellAddress??? Also - Can anyone reccomend a good Excel VB book? A book that maybe stresses the VB language rather then a cook-book approach.