I have an array, let’s say B1:D20. I would like to be able to manually select any cell within this array and then run a macro which will place the contents of the selected cell into the cell in column A in the same row as my selection.
View 3 RepliesI have a number of worksheets and need to move data from the same cells of each work sheet to a summary worksheet. I manually entered the cell id's for the first sheet.
Example =Jan!M6, =Jan!N7, =Jan!O9 etc.
I know I should be able to automatically enter these same cells for the remainder of my worksheets with out manually going in and typing each one (there are a lot of entries.) I just can not remember how to do it. The next sheet is named "Feb" and "Mar" etc.
I have a spreadsheet with a serial number is row 1 in column A with the rest of Row 1 empty. Column A is empty in Row 2, but has the data associated with the row above in columns B through L of Row 2. Then comes 2 blank rows and the pattern repeats with a new serial number in column A of row 5 and so on. I would like to move the serial number down one row, delete the now empty first row, delete the following 2 empty rows, and then loop to do the same thing again for all 9000 rows of the spreadsheet.
View 2 Replies View RelatedIs there way to automatically clear the contents of a cell when the user clicks in that cell. Eg, click in "A1" then then "A1" clears automatically.
View 10 Replies View RelatedI have 2 col A & F. F col associate with date values & Col A has some color cells.I want to move down those color cells to a selected non-color cell row when run a macro.
I have code which perform to move color cells down to selected cell but problem is, if i have A4 & A6 color cells and i selected F2 cell & run macro then color cell A4 & A6 move down to cell A2 but cell A3 move to place A6. The sequence is
A1A2A4A6A5A3A7A8 & so on but i want cell A3 just push down the order & sequence will be
A1A2A4A6A3A5A7A8 & so on My code is as
Code:
Public Sub Move_colored_cells_rows()
' Instead of moving the entire row , 10 columns will be moved
Const NUMBER_OF_COLUMNS = 10
[Code]....
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedAttached is a document, column C & F highlighted in green are areas that users will input data. I need to create a button (top left of spreadsheet) that when pressed moves both the data from column C & F up into the box above. The top set of dates would be deleted and the dates from Trip 2 would move up into the Trip 1 position, Dates from Trip 3 would move up into Trip 2 position and so on.
View 2 Replies View RelatedWhen I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
I am trying to select and move text from one column to another. I have roughly 1,000 cells in column A and I would like to tell Excel to select characters at certain positions and move them into the adjacent column.
I want it to look like this...
column A column B
ABCDEFGHI BCI
Each cell in column A has a 9-letter sequence. I would like to move characters 2,3 and 9 into the adjacent column
A button macro that will move the whole row of the selected cell to another sheet?
View 3 Replies View RelatedHow would I get a particular cell to display the contents of any cell that might be selected.
ie, if I click on A1 I want A2 to display the info thats in A1, and if after that, I click on E12, I want A2 to then show E12's info, etc etc.
I have over 6500 rows of data. In Columns A through C for each line I have data for boys name, and then similar data for the girls' name on the same line in columns D through F. I have inserted a blank line after each of the more than 6500 lines because I need to move the data in columns D through F down to the next line and over to columns A through C.
View 2 Replies View RelatedHow do I after entering data into say cell A1 and jumping it to say cell F3 and enter data and then another and so on
View 2 Replies View RelatedI am just getting started and have over 1000 items in the list. I want to be able to run a macro that would take the root portion of the image link and then replace the 'imagename.jpg' with 'modelnumber.jpg'
So start with
Column 1 www.photobucket.com/a/aa/a/imagename.jpg
Column 2 LAT-NR460
and end up with
Column 1 www.photobucket.com/a/aa/a/LAT-NR460.jpg
Column 2 LAT-NR460
Column 1 could start empty or just with the root.
I'm working on a spreadsheet that has a title sheet with a list of company names, each subsequent sheet has that company’s info. I have a macro in it that uses the name in A1 (on the company info sheets) to name the tab (with error checking).
What I now need (and can't for the life of me figure out how to do) is to have a link between the title sheet -when you click on a company name- and the company info sheet.
The company info sheet had the same exact name in A1 and on the tab as what is on the title sheet.
this is my first post in this great forum. let me start talking about what I need, I used to convert some statement from PDF to XLS format for my work purpose. sometimes I am facing a problem that some text in the statement will come in more than one row, actually I need it to come in one cell but it is coming in several rows that mean, if I want to sort or filter my data, I will lose some important data. What do I want???
I want a macro to merge the contents of selected cells and put it in the first cell of the selected cells then clear the other cells. I will use this macro for the following cases: Case 1- assume we have this data in any sheet.
B1=How
C1=are
D1=you? ( all without any space )
after selecting the said cells and applying this macro, the result will be:
B1=How are you? ( one space only between the content of the selected cells )
C1=D1=empty
Case 2- assume we have this data in any sheet.
B1=How.........
I'm attempting to FIND all occurrences of the word Godaddy embedded in strings in Col A, and if found, copy the contents of Col B to Col E.
1. The VBA is amending on the Loop While line, and
2. What syntax do I use to copy the contents
HTML Code:Â
Sub Macro3()
'
' Macro3 Macro
'
'
With Worksheets(1).Range("a1:a10")
[Code] .....
I have a workbook with multiple sheets. I need to create a macro and associate it with a command button that will cut the row the user has selected and paste it into the last empty row on another sheet in the same workbook, then, go back to the first sheet and delete the empty row.
View 3 Replies View RelatedI would like to fill my dropdown box with the contents in a selected column (removing duplicates).
View 13 Replies View RelatedI'm building a userform (for the first time), and I'm working with a textbox control. I'd like to make it so that when the user clicks in that textbox, the contents is selected, so that if they begin typing, it will type over what is already there.
My question, specifically, is whether or not there is a property I can set to make this the default behavior, and if not - what event do I tie to this action? Is it the "Enter" event?
What I have now, which will probably be unacceptable to my users, is code that looks like this:
Private Sub tbName_Enter()
ActiveControl.Value = ""
End Sub
This makes the contents disappear, but I'd rather they stay there and just become "selected".
Need way to interupt my code whilst the user selects a row. ie. if I wanted to move the contents of one row to another I would want to say: "select source row" (and want the user to click on any cell in that row) I could then put the rownumber in a variable with
View 2 Replies View RelatedOnce the user has submitted the data and the results are shown on Sheet1, how can i move that data into selected fields on sheet4.
find the attached excel sheet...
enables the user to select a row to delete. However, I need to do more than that. I need to be able to copy all the rows until row 37 and move it one row up after the selected row is deleted. Below is the code
View 3 Replies View Relatedto make cursor to move only on the selected cells.
E7, O21, O22, O23, O24, Z23, Z24, Z26, Z27, Z28, C26, C27, C28 ...
I have listbox of information set up to have a user choose several items. I want the items to then transfer to another worksheet. I am using the code I found here:
Private Sub CommandButton2_Click()
Dim lItem As Long
For lItem = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(lItem) = True Then
Sheet2. Range("A65536").End(xlUp)(2, 1) = ListBox1.List(lItem)
ListBox1.Selected(lItem) = False
End If
Next
End Sub
But it is only moving The first item in a column, instead of all the columns of information. What do i do to get it to move all the information??
The following code populates a forms' second listbox (Elements_lbx) with True. No amount of diddling (by me) can get the selected items from form's first listbox (Content_lbx) moved over to the second. (NB. the list box isn't the standard VBA listbox but an open source: ListEX from Marco Bellinaso.)
Private Sub CommandButton2_Click()
Dim lbx_Sel As Long
' loops through ListBox to test if it is selected
For lbx_Sel = 0 To Content_lbx.ListCount - 1
If Content_lbx.Selected(lbx_Sel) = True Then
Me.Elements_lbx.AddItem Me.Content_lbx.Selected(lbx_Sel)
'
'Clear the selected item
Content_lbx.Selected(lbx_Sel) = False
End If
Next
End Sub
I have a sheet named PE which is the main source of handling a contents in other sheet.
How to make a selected contents in PE sheet appears automatically according to weeks in sheet1?
How do i use data validation, offset or combo box to solve this problem?
I searched but didn't find exactly what I needed. I have a workbook with 31 sheets. It is a price guide with each category on a separate worksheet. I figured out how to list the sheets on a separate tab. What my client wants is the ability to:
1. select certain categories for printing, the ToC, Cover and backcover pages have to print in every case
2. the ToC has to change depending on the sheets selected.
I'd rather write some code and give him an an easy command button rather then teaching him how to select non-concurrent sheets and printing only active sheets.
What I'm really stuck on is the updating of the ToC with active sheets only (category and starting page which changes depending on pages selected).
I have a spreadsheet with 6 hidden columns (B to G). Rows 1 to 14 are frozen and have data that comes from another work book and these rows will be protected. The user will enter data from H14 to U14 and then H15 to U15 for the next row and so on down the sheet. The number of rows of data over a week is variable, a minimum of 21 rows (3 per day) but no maximum.
When the user starts entering new data in the column range H to U I would like to automatically populate the 6 hidden cells on that row with information from particular cells in protected rows 1 to 14. For example B14 would populate with the value from I4, C14 would populate with the value from I5, D14 from I6, E14 from I7 and so on whenever someone enters a value anywhere from H14 through to U14.
I can understand that a worksheet change event would be useful to do this but I guess then it wouldn't want to run every time each cell is populated so I think if it had to activate on a single cell change then the cell in column L would be best. Also, as I understand it, there can be only one block of code per sheet that operates on a worksheet change event, have I got that right? If that is the case then I assume all the code to populate the hidden cells on each row will need to be in this block of code.
let's say cell A1 is colored blue manually, how can i format cell b1 to be colored red? is it possible in conditional formatting?
View 7 Replies View Related