Once The Date Is Choosen To Be Marked Somehow On A Calendar In The Same Workbook
Dec 1, 2009
I am trying to build a user form where people are filling in their holiday requests.
I need once the date is choosen to be marked somehow on a calendar in the same workbook.
Besides the date, I need in this form, people to upload a file "Holiday Request" which, after the submission of the report to be sent to a specific email, and to be stored as Object in another sheet against the name of the person who is submitting it.
I have a calendar in the sheet attached. If there are leave dates that are marked in red, can I create a formula to count the number of leave dates for the entire year ?
I have a spreadsheet that keeps track of my travel. Column A has the date I arrived somewhere, and Column B has the date I departed, and Column C has the name of the city I went to.
I am wondering if there is a way to generate a calendar using my list that will mark those dates. For example, a calendar for the month of June 2008 that would show I was traveling from June 3 to June 14, either by marking those dates with a different color or labeling them with the city names, or even just putting an x in the box.
I currently have a worksheet that when a user clicks on the cell, a calendar form opens. From here they can select a date, click ok, and the date gets placed in the corresponding cell they clicked on.
Now if the user needs to change that date, i want them to be able to click on the cell again, and when the calendar opens, the date in the cell would be selected on the calendar. I was able to do this in a userform, but im not sure how to edit it to work on the worksheet. I am using the below to populate the calendar.
Code: private sub worksheet_selectionchange(byval target as range) if not intersect(target,range("aa16:aa24")) is nothing then .show calendar When the user clicks the date, the below code places it in the cell.
Code: private sub ok_click() with active cell .value=calendar1.value end with unload me end sub
Now the below code was used when I was using a userform, but im not sure how to edit this to pull the date from the active cell.
Code: privatesub userform_activate() me.calendar1=date if not tb is nothing then if isdate(tb.value)then me.calendar1.value = tb.value end if end sub
I have a program where I can update the calibration due date of an item. I have attached a cut down version of my program showing the relevant areas. There is usually password protection on the worksheet so it can only be edited via the form (the vba coding removes the password protection before editing, then re-enables the password protection after editing). The "Update Calibration" button is usually on a "Menu" sheet.
Once the form is opened a serial number is typed in the textbox. The calendar button is then clicked, which brings up another form with the calendar on. The due date is selected on the calendar. When "OK" is clicked, the date label caption is then changed to the selected calendar date. When "Submit" is clicked, the spreadsheet will search for the Serial Number, once found, the label caption (being the date selected) will be entered into the cell to the right of the serial.
If the day selected on the calendar is greater than 12 the date is entered correctly onto the sheet. example: calendar date selected = 15/01/2010. shown on sheet as 15/01/2010. However, if the day selected on the calendar is 12 or less, the date is for some reason entered incorrectly onto the sheet. example: calendar date selected = 08/12/2010. shown on sheet as 12/08/2010???? What is going on here? how come the day and month are swapped around if the day is less than 12????
I want to select a date of choice from a calendar in a field within an Excel spreadsheet.
I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.
This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.
Developer Insert More Controls Calendar Control 12.0
I am looking for a macro or code that if a field not filled or choosen in userform, there will be a error message says "cant continue, please make sure all fields are filled etc..)
I believe it s asked before, but I cant find the relevant thread.
I have a list of products that I want a message to appear prior to printing based on the description choosen.
Product descriptions are choosen in D25:D34 via a drop down.
My wild cards are SWING GATE and DOUBLE SWING GATE, I want to use wild cards because of the many different sizes of each gate.
Private Sub Workbook_BeforePrint(Cancel As Boolean) If Range("B" & Target.Row) = "swing gate" Or Range("B" & Target.Row) = "double swing gate" Then_ MsgBox (Range("F5").Value) & ", Please include chain and locks with order", vbOKOnly, "Chain and Locks" End If End Sub
I'm using Excel 2010. I need to populate a daily calendar with the number of nights spent, extracted from the Date of Arrival and Date of Departure of individuals.
Im designed a form in excel, which has a calendar date picker to select a desired delivery date for the user, which makes it easier to use for the user, than using a text box.
Ive searched a number of websites and so far havent seen what I need.
I want the calendar, once my form has been opened, to automatically change to the current date.
So in summary, the code, I believe would look something like this:
I would like to distribute a workbook that makes use of the calendar control in a userform.
Trouble is.... Not all the end users have the control installed or even a copy of the mscal.osc file.
This workbook is going to be rolled out to a large number of users with varying levels of computer literacy. For this reason I would like to try to 'attach' the calendar control to the workbook OR somehow distribute the mscal.osc fil and automate the installation.
I have a userform that has a date entry in it, the date can be entered in two ways either by entering the date into a textbox or via a popup calendar and the selection is then placed into the textbox, the problem I have is that if any date say 1st october 2009 is selected as a DD/MM/YYYY format the data sheet that it is going into is formatting it as MM/DD/YYYY, but it doesn't happen if the day is over 12, so the 13th october would show as 13/10/2009.
I have a spreadsheet with dates filled in all the columns, in the first row. How can I use VBA to bring up a Pop up Calendar so that when I click on a date, it will take me to the cell with that date?
I am trying to achieve is to get a calendar layout using an array formula. The formula I'm using is from a workbook that I had found on the web and it works perfectly. It was in a general calendar layout when I downloaded it and I have adapted it to run from day 1 - the last day in a month from left to right.
My starting day for each week is Monday (the original workbook used Sunday). The problem though is, when I get to a month that starts on a Sunday, it starts populating from the first Monday, and thus losing the 1st day of that month. I have attached an example.
I created a calendar and made it so when I click on a cell, it pops up and allows me to choose the date. When I choose the date and press okay, it is supposed to put that date in the cell. I created the spreadsheet a while back and remember it working. Now however, it doesn't and I can't figure out how. When I made the calendar, I followed some help posted on here and copied the VBA from their calendar since I don't really know VBA at all. Here is the worksheet. It should have the calendar already created via VBA. I just need to know how to have the popup calendar to place the date selected in E5.
In the attached file I have put together a userform that contains a drop down calendar in order for users to select relevant dates.
I have two questions:
1 - I've noticed that from creating the userform (04/01/10) the date has remained as this and not updated to the "current date". Is there any way this could be achieved?
2 - Is there any way the code etc. could be manipulated to alter the dates in the Date Entry boxes, based on that entered into the "Rostered Start Date" box.
I.e. If a user was to select 09/12/09 in the "Rostered Start Date" box, the other date boxes would automatically change to that date.
I'm trying to reference a public folder in Outlook and pull a date from a specific appointment. I can get this to work for my personal calendar but I cannot get the code right to reference the public calendar.
Code:
Sub GetApptsFromOutlook() Application.ScreenUpdating = False Call GetCalData("4/1/2013", "4/30/13") Application.ScreenUpdating = True End Sub
[Code]...
Now I'm very green when it comes to VBA but I've messed around with the last line of this code in all sorts of ways and I still fail to get the object reference correct. I'm not sure if this has something to do with doing it from excel, offline, online, etc etc...
I can get the calendar control to come up and the value selected on the calendar to show up in a certain cell.
If a user selects a date that is not within a certain 12 week range, I want a message to appear ("date not within 12 week program"), and the user can't select the date.
I am storing nutrition data from a certain date the user chooses and it is a 12 week program from the start date. I want to retrieve info from those 12 weeks but do not want them to be able to select data outside the 12 weeks.
Is there a way to calculate a conditional minimum? I have a range of 1000+ values and I need to find the minimum, but the minimum has to be greater than a specified minimum threshold
Kind of like what they do in airline booking web sites, where you have the option "show calendar" and you select the date from there, to avoid any possible typing mistakes. When you select the cell, a calendar or a date drop-down list should pop-up.
I have a pivot table which contains dates in the drop down list. I wanted user to pick dates from calendar control tool rather than pivot table dropdown list.
I put the following code;
Private Sub Calendar1_Click() If Weekday(Calendar1.Value, vbMonday) < 6 Then
Range("B3").Value = Format(Calendar1.Value, "dd/mm/yyyy") End If
End Sub
it works for most of the dates but not all. Also it does not recognise the dates in the new month.
I have a macro that displays a calendar with code to highlight the current date, but this part of the code does not work and the current date is not highlighted.
etc. for all days of the month, and all months of the year.
(The gold coloured cells are part of a formula I have somewhere else - no need to worry about them)
I was wondering - is there a way to get it so that whatever todays date is, the calendar will highlight the column a specific colour (e.g.) if the date was the 5th January, it would look like this:
January 20091234567891011February 200912345678
(Although not nescessarily that specific (and frankly pretty horrible) shade of green).
I have a list of all the HTML codes, palette numbers and hex codes for all the excel colours.
