Paste Special, While Skipping 3 Rows
Feb 29, 2008im trying to copy a data--paste special--transpose--
i want this data to be copied in a manner, tht the 1st entry skips 3 rows and then comes the next value??
ADVERTISEMENT
Rows To Columns Not Using Paste Special Or Transpose Function
Jul 10, 2012I need a formula to transpose rows to columns of a large table. The transpose array formula is not working for me. I know there is a column and row function formula to do this, but I can't remember it.
View 3 Replies View RelatedCopy Paste Special Macro And Skip Blank Rows
Jan 10, 2012Can a macro make a workbook everytime you copy, it will paste special formulas only and skip blank rows? And can I still let me select the range manually? I would like to use this to link workbooks.
View 2 Replies View RelatedPaste While Skipping Hidden Columns
Aug 17, 2007Sheet1 has info in column a, b, c, d, e.
I want to paste these value into sheet2 but sheet2 has columns b, d hidden.
The paste end up putting the values in the hidden columns.
Is there a way of pasting a speacial so that the hidden columns are missed and i get the paste to go into colums a, c, e, f, g WITHOUT code?
Excel Macro To Copy Data From Array And Paste To Separate Sheet Paste Special Transpose
Jan 29, 2014I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Excel 2013 :: Averaging Rows Of Data Within Larger Blocks Of Datasets - Skipping Rows
Jul 16, 2014I am trying to average different rows and columns within a larger block data set in a series. This data is from a 96-well absorbance microplate reader experiment. I only mention this to describe the raw data output I am dealing with.
Each set of data is in a 12 x 8 block with the next block below it with one blank row between. So I have a block of data contained between A1->L1->L8. The next block is contained between A10->L10->L17. This continues for a total of 28 blocks.
I want to take averages from rows or columns from each block and autofill them into a single column. So for example I'll need =Average(A1-C1) with =Average(A10-C10) below it and so on and so forth. My problem is that if I try to autofill from this already started column the third row will take the average of A2-C2 instead of A19-C19.
Is there a formula/script for me to skip the correct number of rows to the next data block?
I have attached my spreadsheet to this thread. I am using Excel 2013
FeS_Kinetics.xlsx
Pulling Rows From Other Sheet - Skipping Over Rows If Column Is Blank
Jan 17, 2014I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
2013 2 Pat
2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
Here is my failed formula:
=INDEX('2013'!F$3:F$338,SMALL(IF('2013'!$E$3:$E$338<>"",ROW('2013'!$E$2:$E$338)-ROW('2013'!$E$2:$E$338)+1,ROWS(B$1:B1)),""))
Paste Can This Be Set To Default To Paste Special Values
Mar 17, 2007Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
Unfortunately we use excel 97 in the office.
Changing Code From Paste To Paste Special (value)
Feb 23, 2010I've tried to change the line highlighted in red to 'Sheets("Financial Accounts").Pastespecial After:=Sheets("changes")' but the macro crashes.
Sub ConsolidatedTotals()
Dim BeforeSheetName, NextPageName As String
BeforeSheetName = "changes"
NextPageName = "Financial Accounts - " & Worksheets("assumptions").Range("c3")
Worksheets(ActiveSheet.Name).Select
Sheets("Financial Accounts").Copy After:=Sheets("changes")
ActiveSheet.Name = NextPageName
End Sub
Editing Code From Paste To Paste Special
Mar 20, 2007I got this code the other day
Private Sub CommandButton11_Click()
Sheets("Invoice Page").Select
Rm = 3
For c = 1 To 5
Rm = Application.WorksheetFunction.Max( Cells(1000, c).End(xlUp).Row, Rm)
Next c
Range(Cells(3, 1), Cells(Rm, 5)).Select
Selection.Copy
Sheets(" Records Page").Select
c = Cells(3, 256).End(xlToLeft).Column + 2
Cells(3, c).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
And instead of pasting the cells i want it to paste speical so it just pastes values rather than formulas.
Getting Rows To Columns Macro Skipping Blank Rows
Dec 28, 2011I have this in Column A, with about 120 entries:
Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1
Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2
Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
INDIRECT(MOD(ROW)) Skipping A Lot Of Rows
Jul 16, 2009I'm currently working on a report and what I'm trying to do is get a Row of information to pull into 4 rows. My current formula looks like this:
=INDIRECT("'Paste SAP'!H"&IF(MOD(ROW()-1,4)=1,ROUNDDOWN(((ROW())+3/4),0)," "),1)
I change the bolded number to correspond to which row (1,2,3,0) but it's not functioning. I've done it with other but for some reason this one doesn't work. I've attached the template so you can see what it looks like. The problem is with the SAP Tab and the info from the Paste SAP tab.
Autonumber While Skipping Rows?
Dec 21, 2012I am trying to get excel to autocount starting in a7 and ending at a600, skipping 3 rows in between, and only gng from 1-10 then repeating and inserting a page break after the 10th line i have put an example in.
SAMPLE1.xlsx
Skipping Rows When Filling Down And Right?
Oct 30, 2013I am working on an inventory sheet. Its probably only complex due to the amount of data. There are several hundred locations we service and these are in a single column, and then there is the equipment we use that is several hundred columns.
Each location uses 3 rows and the 1st needs the formula to equal 2 rows beneath it. i.e. cell E28 has the formula =E30. I basically need to fill down, but only put that formula into every 3rd row, as the two rows beneath this row need to stay blank, or show number i manually put into either.
The second part of this, is there a way once that is done, to just select those cells, and fill to the right all the way? Again, i do not need to fill the two rows under that one.
I have attached part of the sheet .....
The green cells are the ones that need the formula, and those will be copied down, and right. the others need to be left alone. I have been sitting here for an hour manually entering in the =XXX for each cell.
Sum Rows With Skipping Cells
Jan 30, 2014I'm trying to total up some rows that are put in a repetitive order repeat. I can do this, but the method I'm using is highly inefficient. Is there some slick equation I don't know about?
Example below:
Worker 1 - Double Time - each of these has 200 columns for different job codes
Worker 1 - Over Time
Worker 1 - Regular Time
Worker 2 - Double Time
Worker 2 - Over Time
Worker 2 - Regular Time
Worker 3 - Double Time
Worker 3 - Over Time
Worker 3 - Regular Time
...and so on to 1000 workers
Total Double Time - for each job code
Total Over Time
Total Regular Time
Conting And Skipping Rows In VBA
Aug 27, 2007i am useing colmn a only for input,
starting from cell A5 to the end of A,
so as i input data starting form cell A5 the active cell automaticly moves to the next row A6, so i could input another number but after ten rows it should skip an extra blank row and start this all again
but thats not the only prob, starting from cell B5 should count every ten rows and give it a number starting from 1,2,3,4... and no number should be on the blank row.
a b
5 223 1
6 234 1
7 987 1
8 787 1
9 976 1
10 324 1
11 345 1
12 455 1
13 247 1
14 685 1
15 ......................
Copy Rows From One Sheet To Another Is Skipping Every Other Row
Nov 26, 2009On the attached example there is a button called 'unsettled hedges', click this and it loads a userform. In this example, there are 10 rows of data that want a value entering into the 'returns' textboxes.
If you try to enter a value into all of the 'returns' textboxes and click the 'settle hedges' button then all the values from the textboxes should against the relevant row in column L of the 'unsettled hedges' worksheet and then each of these rows should be copied to the next available row in the 'settled hedges' worksheet.
This isn't happening though, instead, it is copying across every other row from the 'unsettled hedges' worksheet, leaving half of the rows still on the unsettled hedges worksheet.
Skipping Blanks Rows In New Table
Jul 13, 2009i have table in the left side and i want to get the results in the table in the right side skipping blanks row price with taking in consideration blanks are formula contain ""
[IMG][/IMG]
Create New Rows. Skipping Some Cells
Nov 9, 2006Attached is a sample spreadsheet. Please look at the spreadsheet will reading this post, as it would be rather confusing otherwise.
From this spreadsheet, I need to create two new spreadsheets (I assume one at a time is best). One (S1) will contain data from rows where Column C = "Regular Hours". The other (S2) will contain data from rows where Column C <> "Regular Hours".
The format of S1 (3 columns) is: Payroll # (Column B), code for the type of hour (this code I will need to write into the VBA code), the number of hours (D:G,Q:T,AD:AG), and the constant "N".
The format of S2 (4 columns) is: Payroll # (Column B), code for the type of expense (this code I will need to write into the VBA code), the dollar amount (I:P,V:AC, AI:AP), the project (Column C), and the constant "N".
The trick is each row on the new spreadsheets can only contain one hour/expense (otherwise this would be easy!). So, I need to loop to copy/paste the right cells, and need to skip over blanks, and need to end at column AP, then continue to the next appropriate row. As well, columns H, U, and AH are not used on the new sheets. I have another spreadsheet slightly similar to this with looping, but it is a delete type loop, not a creation one, and it doesn't have to have seperate rows like this does. I know this one is a bit big, but I know someone out there can figure out some looping code that can handle this.
Paste Special To Last Row?
Mar 26, 2014copy content from particular cells in the current sheet to the next available row in another sheet. I need to Paste the Values as the cells I am copying are equations. It was working great until I tried using it again today. For some reason I get the following error:
Run-time error '1004':
Unable to get the Select property of the Worksheet class
Here is my code:
Code:
Sub CopyCampaignMetrics()
Range("A2:E2").Select
Selection.Copy
Sheets("Sheet2").Select("A" & Rows.Count).End(xlUp).Offset (1)
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
Paste Special Value
Dec 31, 2006How would the code be changed below to be Paste Special Value?
The numbers copied are changing every few seconds and I want a snapshot of it.
im TheRow As Integer
Sheets("Loader").Range("C5:AC5").Copy
TheRow = Sheet2.Range("A100").End(xlUp).Offset(1).Row
If TheRow < 6 Then TheRow = 6
Sheet2.Cells(TheRow, 3).PasteSpecial
If TheRow = 6 Then Range("B6").Value = 0 Else Cells(TheRow, 2) = Cells(TheRow - 1, 2) + 1 / 24
Cells(TheRow, 1).Value = Date
ActiveWorkbook.Save
LastSoon = Now + 1 / 24 '1 hr from last time
Application.OnTime LastSoon, "Capture" 'set up for next hour
Paste Special
Jul 21, 2007I have the following in my Workbook
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
'If you have any worksheet to exclude
If Sh.Name = "Sheet2" Then Exit Sub
With Target
If Len(.Value) Len(Trim(.Value)) Then
MsgBox "You just entered a leading space character in" & vbCrLf & _
" cell " & .Address(0, 0) & "." & vbCrLf & vbCrLf & _
"If you intend to delete the value in that or any cell, " & vbCrLf & _
"please press the Delete button on your keyboard.", 16, " No leading spaces allowed !!"
Application.EnableEvents = False
.Value = Trim(.Value)
Application.EnableEvents = True
End If
End With
End Sub
When I tried to Copy>Paste Special > Formats or Values of more than One row this line highlights
If Len(.Value) Len(Trim(.Value)) Then
That is, if I select C3:Q3, Copy, then select C10:C15 and try to do a Paste Special that is when it gives me an error 13: Type mismatch.
If I just select C10 and do the Paste Special, it's just fine.
Vba: Doing Paste Special | Add
May 4, 2007I am trying to write a VBA code which will add any figure (say X) to the visible cells in the selected range. I am mentioning the visible part becuase my data might be filtered and thus. So far I have been able to figure out the following code(by recording a macro and then going behind the scenses to see the code):
Sub Add_X()
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlAdd, SkipBlanks:= _
False, Transpose:=False[/color]
End Sub
The problem is that how can (if possible) I can pass a parameter to the above code (which will be X; as explained above). There might be many possible solutions??? However one that comes to mind is that when I selected a range of cells and then run my code, a dialog box should pop-up and ask for a # and then then take that # to add it to the visible cells of the selected range.
Allow Only Paste Special
Jan 26, 2008Is there a way to only allow paste special values or formulas within a cell? People are coping and pasting and screwing up the formating
View 2 Replies View RelatedFill Down Into Merged Cells Without Skipping Rows?
Oct 21, 2013My merged cells are not purely aesthetical - each merged cell (covering 6 rows in total, beginning at A3:A8) has colums and rows to the right for other details/formulae relating to that specific merged cell (which contains a customer account name).
The list I'm trying to reference is on a seperate tab - 'Projects' starting in cell A4. This list will have project names added to it, so I need my merged cells to reference the list, and subsequently pulling through all new additions to the list, rather than having to add them on a 2nd time.
Loop Skipping Random Rows For No Reason At All
Apr 15, 2009My sub is supposed to take the values from Sheet1 and paste them into 16x10 tables on Sheet2. However, for some odd reason, the loop is skipping some rows. If you take a look, there are 2184 values in Sheet1, but only 1368 end up in Sheet2...SKUs such as 518166,518167,510573,513746,513752 are just being skipped for no reason.
View 2 Replies View RelatedSkipping Empty Rows When Importing Files
Oct 30, 2006Is there an easy way to revise the following code so that it imports ONLY the non-blank rows from files?
Sub ImportFiles()
Dim i As Integer, files As String, text As String
ChDir _
"C:Test"
Cells.Select
Range("A1").Activate
Selection.ClearContents
'Selection.QueryTable.Delete
Application. ScreenUpdating = False
i = 0
files = Dir("*.csv")
Do While files <> ""
Open files For Input As 1
Do While Not EOF(1)
i = i + 1
Line Input #1, text
Worksheets(1).Cells(i, 1) = text
Loop
Paste Values From Another Worksheet (paste Special, Values) In A Cell Which Is Lookup Value I Get #N/A
Jun 28, 2009I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies View RelatedMulti Sheet Cell Referencing While Skipping Rows
Aug 12, 2008I need to be able to auto fill, on sheet two,cell references for every 26th entry. Below is an example of what I would like it to be able to do with the drag, auto fill.
View 8 Replies View RelatedMacro To Paste Special
Sep 14, 2008I have some simple Macro code that works fine for the COPY side of the action...
View 14 Replies View Related
