I have a list of values (some are duplicates) which I need to rank.
The problem arises where I have more than one of any rank, the next rank skips a number. I need to have a list of sequential numbers and therefore can't have any numbers missing.
Example:
Value Rank Desired Rank
120 1 1
125 2 2
130 3 3
130 3 3
142 5 4
What I am trying to do is give the rank in column D based on the values in columns B and C. Some of the values in column B will have then same rank, and as such I want to add further criteria on which to rank them. I would first like to rank the values in column B and then rank the values in column C, which should give the rank in column D. For example Dog and Frog have the same value of 400 from the Non UK column. Therefore, rather than having these as both rank 1, I want them to be ranks 1 and 2, so want to add another criteria (UK). As Dog is greater than Frog in the UK (i.e. 10>7), I would like to rank Dog as 1 and Frog as 2. Goat will be ranked as 3 because it had the thrid highest value in the Non UK.
ABCD
1Non UKUKRank
2Cat20055
3Dog400101
4Eel200114
5Frog40072
6Goat30023
Attempting to do a spreadsheet for my golf club, to record scores, etc...
Managed to get it to pretty much what I want despite some very extreme looking formulae! So for some scores such as 56,56,57,57,54,54, Rank would just give me 3,3,5,5,1,1, so I have put a second column next to 56,56,57,57,54,54 where I input scores to seperate ties (better back nine scores), so in the above I would have for example 30,29 next to the two 56s, 27,29 next to the two 57s, and 27,28 next to the two 54s, so the rank would return 4,3,5,6,1,2. I have gone three stages further, so if, the back nine score was also tied, I have a column for the last 6 hole score, the last 3 hole score and even the last hole score. This is some serious formulae at this point. However, I now want the OPTION to rank the original data as 2,2,3,3,1,1 if I don't put any data in the back nine column.
This is so that I can input doubles scores on the same spreadsheet as singles scores, so if two people shoot the same score in singles I can input the back 9 scores etc to decide who comes out ahead, but in doubles I would just leave the back nine score blank, and then two people would share 1st in the rank, but then I need two 2nd ranks NOT 3rd ranks as it currently is.
Just so you can see how complex it is the current forumlae in the rank is here is an example:
=IF(O7="","",IF(K$2="MEDAL",RANK(O7,O$7:O$255,1)
+SUMPRODUCT(--(O7=O$7:O$255),--(P7>P$7:P$255))
+SUMPRODUCT(--(O7=O$7:O$255),--(P7=P$7:P$255),--(Q7>Q$7:Q$255))
[Code] .....
There are other things in there to sort out a few other issues as well, but I cant see the wood for the trees so to speak, to get it todo what I want!
I have also attached a sample from my spreadsheet to better demonstrate what I want!
Un-Skipping the Rank after a duplicate value to get a regular Series!
Col A------Col B------Col C------Col D
Players------Scores------Rank------Answr
SACHIN------186------1------1
DHONI------183------2------2
KAPIL------175------3------3
HAYDEN------175------3------3
SEHWAG------167------5------4
BORDER------158------6------5
RAHUL------152------7------6
LARA------148------8------7
RICKY------148------8------7
KEVIN------142------10------8
BOON------133------11------9
FLINTFF------119------12------10
BOTHAM------112------13------11
I want to prevent the skipping of numbers while using the RANK function which skips the next number when it hits a duplicate value. I want to get the rank as well as not have the next number skipped.
I have a worksheet that has 3 duplicate values in a particular column, I need a macros that will highlight two of the duplicates row and then another macro to delete the entire row. The duplicate element are in column R. find attached worksheet.
Copy of OCL 2010 (3).xlsx
I am using the following macro to insert the word "Duplicate" in the first blank column next to a duplicate row. My data is sorted by the first column. Data Example:
12345 a
12345 a DUPLICATE
11111 b
23123 b
Here is the macro I am using and it does not work. It marks the first duplicate it finds then goes into an infinite loop. Any Idea where I went wrong?
Sub MarkDupes()
x = ActiveCell.Row
y = x + 1
Do While Cells(x, 1).Value <> ""
Do While Cells(y, 1).Value <> ""
If (Cells(x, 1).Value = Cells(y, 1).Value) Then
Cells(y, 3).Formula = "Duplicate"
Else
y = y + 1
End If
Loop
x = x + 1
y = x + 1
Loop
End Sub
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
I have 10 sales figures in C2:C11.
In D2:D11, I want the rank of those values, with one twist.
If the value in B2:B11 is X, then that value is excluded from the ranking.
I am trying to basically do:
=RANK(C2,IF(B2:B11="X",0,C2:C11))
Which formula can I use to rank the people below.
Consider that the lower the value on attendance and cancellations is, the better this number will be.
In the other cells the highest the value, the better the number is.
NameAttendanceUtilizationProductivityQualityCancellationsCharles089.38%26.60NA0Nick587.69%56.921001Brian384.51%51.32800Joe080.71%36.151000
Using formula, how do I rank
CAM100-24
COM98-21
CAM100-18
CAM27-37
COM121-5
COM98-23
so it first sorts in alphabetical order using the string before the "-" i.e. CAM27 comes before CAM100, and then by the biggest 'secondary values' (the value after the "-") so that COM98-23 comes before COM98-21?
Got a question about RANK. As you can see from the example below, I want the rank of 1 to be 6, not 7 - same values keep the same rank but the next value takes the next rank number.
Is there a way to achieve this - I need to rank around 4000 lines...
Anyone know of a function that will return a rank of cell C3, in range C3:C800 that does contain a few #N/A values?
View 9 Replies View RelatedIn a range of 27000 records I dlike to find the lowest 5 values excluding, div0, N/A and other error things like that
View 9 Replies View Relatedam currently setting up a fantasy football league.
i have set up the league, with team name overall points and position, my problem is that when 2 teams have the same points one team is omitted and the other team has its name on both entries
the formula's i am using are
vlookup = to find the name of team for the points
large = to find out points of each team
I have two sheets of data and would like to rank according to the order in which the data fit on both sheets. Rank function only seems to allow one sheet at a time.
View 9 Replies View RelatedAttached is an excel file that contains all possible values in the first column (9238 of them) and a comma separated list of a subset of those values in the second column. I need to find a way to replace the smallest value with 1, the next smallest value with 2, ... , and the largest value with 9238 in every instance. In other words, I need their rank value.
OhioBlockGroup.xlsm
I'm using a Large function embedded in a Match function to a ranking.
The issue I'm having is that if there are 2 of the same values in the Top 5, it counts the first one twice rather than each one once.
I'm trying to rank the values in row 94 while ignoring only zero values and including positive and negative values. I'd like the function to rank the values in descending order, beginning with the most positive value and ending with the most negative value while ignoring all zeros. The function I've come up with so far ranks the positive values correctly and ignores the zeros, but the negative values are ranked as if they come after all of the zero values instead of being ranked immediately after the smallest positive value. Is there a way to fix the function below to make it do what I want?
=IF(D94=0,"",RANK(D94,$D$94:$AY$94,0))
I am creating a Power Poll Spreadsheet for a Fantasy Football League, and I need to create a code that will take the win/loss columns and in a new column assign rankings so that the team with the most wins gets ranked '1st', then '2nd' etc. I'd like it to, in the case of a tie, rank both teams equally 'the 3rd and 4th best teams both have identical records, so both get ranked '3rd' and the '4th' ranking gets skipped.
I have searched for a formula to allow this, and I can't find it. Can anyone help? As an aside, is anyone aware of a place I can find a listing of formulas that can be used in sports ranking, etc?
So, I have some names and values. Rank function give me order for those values.
Small function gives me ascending order. I want to get first n (let say 5) values back next to each other but can't use VLOOKUP function because sometimes I get duplicates (red numbers).
If there is more same numbersthat small function returns... It need to give me all of them, no matter 5 is limit. how to get back values of rank function that are duplicated. Book1.xls
I'm having problem with ranking results (ascending) with similar values e.g. values 1, 2, 2 and 4 fails by use of Rank-formula (rank: 1, 2, #N/A and 4) as value 2 appears twice.
I've attached a simple example of the problem.
1. I would like to be able to select a month from a drop down ( cell C4), and for Column B ('Cumulative Performance') to reflect the sum for each name between Jan and the month selected.
2. In Column D I would like to rank the relative position of the sum total; such that if I selected 'Dec', John would display '13' in D7, Anne '3' etc.
3. In Column E I would like to show by way of a coloured arrow (or even a smilie icon) the relative change in ranking of the sum totals evaluated for my chosen month with those calculated up until the previous month (e.g. for Anne, if I select June, the Jan to June total is 36 (rank 2 in the June total's), the May to Jan total for Anne is 32 (rank 1), therefore her relative rank movement between the June and May cumulatives moves down and cell E8 would show a red-down arrow (amber horizontal for no change and green up-arrow for an improvement in rank).
I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.
Formula:
[Code] ....
I have a collumn with lots of different text values some repeated. how can i count all these values so that it only counts each value once.
e.g
if in cell A1 i have = "apples"
and in cell A2 i have "apples"
and in cell A3 i have "Pear"
I have data that looks like this:
day# id amount
1 56575 0
1 56675 0
1 56680 0
1 56683 0
1 56681 0
1 51810 0..............
How do you write an excel macro that looks at the number in the first column (day #) and finds all the duplicate id#s in the second column that are in day 1and adds the amounts together in the 3rd column then writes the first column number (day#), second column number(id#) and the third column (sum of the amounts of duplicate Id#) to an new worksheet. Then the macro would loop through day #2 and do the same thing. Notice that the values in the id column are unique in this data set below this is how I would like the data to look. I have accomplished this in a pivot table but my problem is I need a cvs file to export the final data into an external database which is why I need a macro.....
how to get this with formula:
Column A - - Column B
a - - - - - - - a
a - - - - - - - b
b - - - - - - - c
c
c
I'm trying to Rank a list and than re-rank the list while excluding certain (or by Criteria) items
Vendor Co
Cost Fee
Rank
Vertox
500
4
BV
1520
3
[code].....
I have data that is set up like this:
A1 B1
Apple Sweet
Apple Juicy
Apple Worm ridden
Apple Round
Apple Cooking
Apple Grannies
Pear Green
[code]......
and would like to combine all of the duplicates from A1 into one field, with all of the options in B1 combined into one cell (separated by a |). So the above table would read:
Apple Sweet|Juicy|Worm ridden|Round|Cooking|Grannies
Pear Green|Tasty|Mouldy
Orange Tangy|Tasty
Peach Rare|Forbidden|Expensive|Squishy
I am currently busy with a material tracking sheet. The sheet tracks all the material from fabrication to being released from painters.
My problem is that in a summary sheet that I created, I used vlookup to get the exact value of the item number that was released.
Focus on Item # 043-06016
example summary.jpg
[Code] .....
This formula only gets the first value and not the 2nd value that was also released so that in my summary sheet i can get 2
example released items.jpg