I have a number in X11 that can be anywhere from 1 to 26.
In Y 11 I want to reference Column A with the Row being the number in X11.
For example if the number in X11 is 13, I want Y11 to reference Cell A13, or if the number in X11 is 14, then Y11 would reference A14.
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
I have a userform in wb "A" that I key data into. When I hit the 'submit' button I need the data to go to wb "b", ws "data" and go to cells in columns "CA-CK". All that I can do, when the data goes to wb "b" it need to load to the row that has the same date as the date I enter in textbox1 on the userform. The date column in wb "b" is column BX.
View 9 Replies View RelatedIn cell A1 I have a forumlar which equals 'A2:F1465' which is the range of my data, how can I get a pivot table to use this for it's values as when I do it normally it asks me to manually select the range as above?
View 2 Replies View RelatedVery simply put, let's say there are examples numbers 1,2,3,4 put in cells A1 to A4 (vertical) and more example numbers 50,60,70,80 are put in cells A6 to D6 (horizontal)
What one formula can be written in B1 that I can copy down to B4 that will make B1=A1+A6, and B2=A2+B6, and B3=A3+C6, and B4=A4+D6
I have a data table that looks like this:
RATE
Monthly
289.68
1.00%
262.81
2.00%
276.04
[Code]....
all the RATE numbers are manually entered.
now, if i reference the 3.00% number under the RATE column to the INPUT cell that I entered when I setup the data table, this happens:
RATE
Monthly
289.68
1.00%
262.81
[Code]....
this is obviously not correct, it is the value for the entry above.
and...
if i make ALL of the RATE cells then relative to the 3.00% one... (in other words 2.00% is actually =A5-0.01 and 4% is actually =A5+0.01)
i get...
RATE
Monthly
289.68
1.00%
262.81
2.00%
250.00
[Code]...
this is weird b/c the number for the first one and last one never change, but all the ones in-between change.
incidentally, the formula which is being solved is simply a 30k loan pmt for 10yrs ( =PMT(RATE/12,120,30000)*-1 )
I'm trying to link a range of cells in one workbook to a range in another workbook, both in a network drive. Everything is working out well except for the cells that have a data validation list on them. the formula linking one cell is ='G:Destination To[Workbook2.xls]SheetX!B13 so I'm just trying to get the value in the cell. I don't need the validation list to transfer just the value of what was selected. If I go to that cell and type something in then it transfers over just fine. If the validation list was used in Workbook2 then I get a #N/A in Workbook1 that is linking to the Workbook2 cell.
How can I link the cell with a data validation list in it to a cell in another workbook so that I can get the data in the cell (whatever was selected from the validation list)?......
I am designing a spreadsheet at work, and need a little assitance. I can't find the answer I need online or here either. Here's the problem: I want to be able to enter data (A 5 digit job number, 80227 for example) into a cell, and then multiple other cells would auto fill with data from outside worksheets. The worksheets are in a seperate folder on my server and named under the same name as the project. (So if I entered 80227 as the data in A1, I would want A2, A3 and A4 to open spreadsheet 80227.xls on the server, locate the referenced cell/s, and insert the info from 80227 into them.)
I can easily reference the cells alone and have them input the data, but this is extremely time consuming since this spreadsheet has all the current jobs our company is working on. I currently am running a macro/VBA that automatically updates all linked spreadsheets without them having to be open, so that is not an issue.
If I have two cells and a named range mexico
A1, A2.
A1 contains the string: "mexico"
A2 is the cells that has required data validation (drop down list).
I want A2's validation reference to be dynamic, in the sense that I can it reference it to A1; converting the string "mexico" to a named range mexico
I tried inputting = INDIRECT(A1) into A2
But I lack clarity in my understanding of referencing.
What is the correct procedure here.
i want to search OK7V0T in all cells and return the cell reference beside matching data row
serial 1serial 2serial 3
box-4OK4KCUOK4KI0 OK4LLS
box-4OK60ZDOK62AP OK62QU
box-4OK6TA5OK6TBP OK6TFW
I have a data tabel in Sheet 1 & Sheet 2
In sheet 3 they are combined via reference in order for me to do calculation in the input - They are combined in sheet3 as the columns are not identical.
Because the data-tables will be updated via sharepoint, i have to link to cells beneath the data-tables as i expect these will be fill out when the tables update.
My problem is that when the tables update, i dont see the updates in my "combination" sheet. it appears the the data tables add a new line, which moves my cell reference 1 line down.
Ex: Had a reference in Sheet1'E3 - after the data table updates the reference is now Sheet1'E4.
I want to insert a cell reference into the code below to replace the hard coded "100500" so the value in cell A1 replaces the criteria below. Is this possible ?
Rows("3:3").Select
Selection.AutoFilter
ActiveSheet.Range("$A$3:$B$17").AutoFilter Field:=2, Criteria1:="100500"
Range("A3").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Range("A22").Select
ActiveSheet.Paste
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I'm new to Excel (4th day in class) and I can't find the answer to what I'm looking for on the net. Part of the problem is that I don't know what to call it, so I have a hard time looking it up.
Very simply put, let's say there are examples numbers 1,2,3,4 put in cells A1 to A4 (vertical) and more example number 50,60,70,80 are put in cells A6 to D6 (horizontal)
What one formula can be written in B1 that I can copy down to B4 that will make B1=A1+A6, and B2=A2+B6, and B3=A3+C6, and B4=A4+D6
I have on inventory sheet that has all the data in each cell 2612 to be exact! That changes month to month with deletions.
The format is: Sheet 2
A/B/
334702/UEMR88QX
334703/UEMR85QX
334704/UEMR81QX
334707/UEMR8JQX
The master worksheet has about 5000 items and the (A and B) data are both on it with other data ranging from (A-Y). My question is how do I have a cell look up data and return that it exists or doesn’t exist on the inventory sheet?
Master
A/B/C/D/E/
35/ 465/881676311350/311350/UEMR8ZTU
36/469/881676310722/310722/UEMR8V5V
37/483/881676310924/310924/UEMR8XYU
38/805/881676331096/331096/UEMR8J13
My other problem I need to take that months inventory list and have it look at the master list and return the system number from the master list (B) next to the matching inventory number (C). Allowing me to cross match inventory to master each month and save inventory worksheet each month.
I know I can copy the column and past is as a value so I won’t lose the numbers as the master changes but getting the data onto that months inventory has been a pain.
I need to open a customer-submitted workbook which has a list of items in column B, marked by an 'X' in column A on selected rows. Each customer's list is tailored to them with, say, 25 rows each.
I have a master list with identical formatting but which has the data from ALL lists combined.
I want to insert an 'X' in column A of my master workbook for any matching items for which there is an 'X' in column A of the customer's workbook.
I could do this with a formula in column A of my master list, but each customer's workbook has a unique filename and I don't know how to make the formula use a changing lookup array, so I figured this is something that I have to accomplish with VBA.
I've got 2 worksheets in the same workbook.
Sheet 1 contains huge amounts of data - thousands of rows and multiple columns
Sheet 2 - I want to extract the data from sheet 1 column A into sheet 2 column A but only the data from every 21st row.
I want to be able to copy the formula automatically down, otherwise it will take hours to do it manually. So far I can only get the cell reference to increment by 1 each time after copying.
So what I'm trying to achieve is :-
Sheet 2 A1 = Sheet 1 A1
Sheet 2 A2 = Sheet 1 A22
Sheet 2 A3 = Sheet 1 A43
I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:
View 2 Replies View RelatedI have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies View RelatedI have 5 columns set up: A,B,C,D,E
D is the sum of A and B
E is the sum of A,B,and C
As I add in a new column to the right of C (call it C2), I need D (which has shifted over one) to sum A,B, and C.
I also need E (which has also shifted over one) to sum A,B,C, and C2.
Essentially I need a function in a cell that will be able to reference two cells to the left even as more cells are added.
What I would like to do is create a userform where I can input a case reference number and click a command button which searches the CSV/TXT file for any notes for the specific reference number and then returns all notes (seperated by a blank line) in the textbox within the userform in the posted/saved format.
I can find lots about importing to excel but nothing about importing data to userforms.
CSV file added for format. The userform contains two text boxes, one blank for import and one for completing the case reference number (format on CSV file. Line item 1).
i.e. if I searched by SL-001-0155648 I would get the below (It's not code but I thought the best way of showing what I mean):
[Code] .....
Attached File : Notes Test CSV.txt‎
I have the following formula in cell L51 of all sheets calculating the volume depending on the monthly index that is chosen from the drop down menu in a particular sheet. =If(MIndex=0, SUM(D33:L50),If(MIndex=1,SUM(D34:L50),If(MIndex=2,SUM(D35:L50), 0))). I am getting the following message and I do not understand what it is about.
Microsoft Office Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
View 2 Replies View Relatedi am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedCell C3 has "Joe"
Cell X44 is a VLOOKUP that retrieves "Joe"
Let's say Joe goes on vacation. The workbook user goes in and puts a blue fill in C3. Cell X44 would also need to change automatically.
What's needed to make this happen?
I have a list of headings and items and I have a set of formulas that work out depending on the heading what items are listed.
Say theres 10 items and the heading starts at C4 and that heading has 10 items, so it puts "C5" as text in G1 and "C15" as text in G2 so i now know my cell range of items
How can i use the text in those cells to put in a formula to call that as a range?
If I use the indirect formula it shows me the value of the cell, but im after using it to reference the cell
If C5 refers to the value in cell C100, C6 refers to the value in C110 ten rows below. C7 refers to C120, ten rows below that and so on. Is there a formula that you use within excel (not a macro) that allows me to copy the C7 formula to C8 so that C8 will reference C130?
I have tried using INDIRECT and OFFSET formulas but cannot do it without an absolute reference to a fixed cell, which defeats the purpose, since I can go into C8 and manually change it to =C130, C9 to =C140 etc.
Currently using Excel 2007 at work and Mac Pro at home. Thought about R1C1 reference, but don't even know how to change to that style on my Mac.