I have a spreadsheet with several tabs. I am wanting to lookup data in tab "A" based on data in a list. For example:
I may have:
Tab A
Tab B
Tab C
Tab D
Tab E
I have created a validation list containing A, B C, D, E I would like to use Hlookup to look up data imported into the table in Date order.
retrieving data from financial website databases like yahoofinance.com and bloomberg.com. I'm trying to make an automatic stock analysis model to read from the website database and retrieve the data into excel sheets. For example, when opening the excel model the user gets a popup to enter the stock ticker, the user enters the ticker and gets a set of data. Is this do-able in excel?
View 2 Replies View Relatedi have a long list of what were once file names in excel that i need to retrieve data from. i have attached an example file with 2 file names which i recomend to view while reading this request.the file has 2 spreadsheets. the first one is just the file name in the format in which i recieve it. the second one is a table that i need to fill out from the data in those file names.
i have a problem with the following columns in spreadsheet 2:
1. column C: i have the command to copy the site name as it is to this column, but what i need is for the program to read if the site name is ZANUAH or ADORA and then write only Z or A. note that these two site names have a different number of charecters in them.
2. columnd D: similar problem. i need it to read the lab name and write AL if its MAGAMA, BA if its Ben-Ari and SH if its shafir. i have the command for excel to simply copy the word, but how do i make it write the letters that represent the lab name rather than the lab name itself?
3. column E: the report number is the 6 digit number in the file name. i have the command which retrieves it, but it has trouble when the length of the number changes. its important to note that sometimes the number might contain non-numerical characters like 219641-1.
4. column O:i have the command to get the data from the parentheses next to PSD in the file name into a box. what i need is to get it to copy just the letters C or NC from the file name into this column, without the number.
5. column P: same as column O, but here i need just the number, without the C or NC.
6. column T: all i need is for it to copy the last 2 letters from the file name, which i know how to do. the problem is that since the file names come with a .pdf at the end, all i get is df. so in fact i need it to copy th 6th and the 5th letters from the end of the file name, which is above my abilities.
I am trying to get the data out of a cell and put it in a textbox in my userform.
What I have is a Worksheet that has autofilter on. After the user clicks certain objectbuttons, there is only one row, that has data in it, displayed. The cell I'm after will always be in column A and be the second visible row.
I have a fairly simple matrix table that im needing help in which way to retrieve the information correctly.
Starting in row 10...
My Column A has length that i want to return
My Column B has a minimum value that i need A2 to be larger than, say 20
My Column C has a maximum value that i need A2 to be smaller than.
My Columns C & D, E & F, G & H and so on then have different sizes also available... but thats for me to work out later.
Is the best way to achieve this with a series of If statements as Vlookup only returns values to the right, and i want the value on the left, or what is my best way of tackling this problem.
I can attach a sheet that i started if the above makes no sense but my formula is useless so far...
I have the following in Column A. 01. Artist - Title
I manage to put 01 in Column B and Title in Column D
I am struggling to split between the "." and the "-" to show Artist in Column C
I am using in Column B
I want to be able to choose a country from a drop-down list, and then have the spreadsheet retrieve/return values from that country, whose input data is located in a different worksheet. E.g. I want to be able to change the input according to what country I am looking at. I was able to do this with simple IF functions,but I'm realizing that this is not good enough. I want to eventually expand the number of countries that I want to return data from, and then the formula is not dynamic enough.
Example spreadsheet attached.
To make it simple: I want to be able to return the correct values for "page views" and "high" and "low" according to what country I choose from the drop-down menu in cell C3 on the "value calculator" sheet.
Also; in cell N15 and N16 I want the alternatives to be yes and no, and they cannot be yes at the same time. H
I'm trying to retrieve data from a workbook that is currently closed. The formula below works only if the workbook containing the data is open. Is there a way to use the following formula to retrieve the data from a closed workbook?
[Code] ......
I am trying to work out a forumla that will bring through data onto a worksheet for teacher analysis. The data is being extracted from our MIS and put into the attached template. When I change the class on the analysis sheet I want to be able to the pull through the relevant learners attached to the class along with their data.
View 5 Replies View RelatedI'm trying to create a automated calculator that i can customize and adjust. start and what functions should i be using. I've looked into Vlookup/Hlookup and it does not seem the function i need to make the workbook work. Basically what I need is when I enter a item on the A column excel would retrieve the list of Ingredients to the calculator worksheet and multiply it by the amount of variable entered. Then product will be printed and added together to the "sum row".
View 14 Replies View RelatedI have a googlespreadsheet with 4 columns. date, id, name, positive/negative.
What I would like to be able to do is to call a procedure from an excel document to copy/retrieve all of the information between specified dates on the google spreadsheet and place into another worksheet in the excel document.
The spreadsheet is hosted in my googledrive and is confidential (i.e. I cannot publish it), so I am assuming I will need to add password credentials into the code, which will be an added complication.
I have a `master` listing that has a list of material on it.
Lets call it test.xls
Each employee has their own work work-book with only one sheet inside the work book, lets call this test1.xls
I want users to be able to add information in test1.xls and the list test.xls automatically gets updated
I am working on a new budget spreadsheet that I am creating. I want to accurately calculate credit card expenses. As everyone who has a credit card knows, charges made this month are not due to be paid until next month. To make matters more complex, charges made from (for example) January 20 until February 19 are not due to be paid until March 20. With that in mind, I created a spreadsheet with a different tab for each month. Each tab has a place to put in all expenses. Here is an example:
date
Category
Expenses
Remarks
[Code].....
Obviously, The above example is from January. IN the February tab, I want to calculate everything in the "Expense" column that has a date in the "Date" Column before Jan 20 and where it says "Kohls - Frank" in the Category column. Of course, in the March tab, I would need to grab all of the "Kohls - Frank" expenses after Jan 20 from the January tab, and everything before Feb 20 from the February tab.
I figured out how to add up everything with the following formula: =SUMIF(Jan!A:A,("<="&DATE(2013,1,20)&E32),Jan!C:C) How can I filter on the Category tab?
I'm trying to solve i have multiple books but each book contains same information e.g
Book1
Sheet 1
Date
Name
Sheet 2
Location
Postcode
Book 2
Sheet 1
Date
Name
Sheet 2
Location
Postcode
etc ... there is also multiple sheets in each book all are same layout just each book is different customer.
I'm trying to do is have a Listbox that shows all customer name and link back to His/her file location. Then retrieve certain information and display on blank workbook?
Question:
Can this be done without opening workbook
Considering i have 20+ workbooks and growing is this even possible
Cannot merge workbooks into one as this info is supplied by third party
I wanted to retrieve data from horizontal cells to the combobox i created on the userform.
I tried watching some code from other progs, but its not working.
From my combobox1, I want to go read the data from the sheet "TMATERIAL", range "b3:h3"
I have two lists. One is a database (Worksheet 2) with a lot of information, and another is the list (worksheet 1) I need to fill up the data for. What I want to do is to search for the names that are in worksheet 1 in worksheet 2, and if there is a match, retrieve the missing data in those rows, and paste it back into worksheet 1. For example:
Worksheet 1: Joe
Tim 23
Matt
Worksheet 2: Alex 45
Joe 23
Mark 47
Tim 44
Matt 24
I basically want it to be able to search for the corresponding name, and then pull the number associated with it.
I would like to create a summary for the ordering history of each customers. The IT department will facilitate us to generate some raw data and I want to retrieve the data to the summary excel when I type the Ref No of the customer.
For example, I have the following raw data generated, in which the file name is "A123456":
Ref No
Name
Address
[Code]....
And I want to extract the data to the following summary. When I type "A123456" in the field "Ref Number" in this summary, it will automatically retrieve data from the corresponding raw file:
Trading Summary
Ref Number:
A123456
[Code]....
retrieve the multiple rows of data from one specific item to another worksheet inside same workbook. below attachment is my sample workbook.
inside the workbook, eg.. please have a look on Sheet 3 (the record of the item and its description) will store on Sheet 2. From sheet 1, when user choose the item from drop down list, and click the button will direct to the retrieved result in sheet 2. my question is i cant retrieve the multiple rows of data exactly in the sheet 2. it only remains one item for one row of description.
and below attached picture is what i wish to achieve =)Capture.PNG
Another VBA problem I am having to need help with...
Andy Pope and DonkeyOte graciously helped me with the first stage here:
http://www.excelforum.com/excel-prog...-a-time-2.html
where I was trying to loop through 1000 records at a time and retrieve data from my Oracle database based on a single Field ID.
This is the code that ended up working...
I've been unsuccessful in trying to write a formula that retrieves a single result based on two criteria (from a large set of data on a separate worksheet). I've tried various INDEX MATCH combinations but no luck.
A
B
C
D
E
1
DATE
TEAM
PITCHERS
RESULT
2
4/1
nyy
Sabathia
???????
[Code] ........
So this is a very simplified version of my real data set which is about 20 times this size. The first worksheet is where I want to store my retrieved results (lets say D2 for example). I want to retrieve data from the second worksheet that matches two criteria (exactly) originating from my first worksheet. The two criteria to be matched from the first worksheet are, for example, A1 (sabathia) and F2 (the date 4/8). The complicated part is the desired result should be from the corresponding K/9 column in the second sheet, which in this case (based on sabathia and 4/8 criteria) is I2 (result would be 3). It's complicated since I can't just tell the formula to look down a specific K/9 column, I need to search ALL the K/9 columns in the sheet (of which there are many). Is this even possible with some sort of nested INDEX MATCH? Any possibilities outside of VBA programming, or is that the only way?
How to retrieve the latest data from dataset.
My data consist of multiple entries of same id(s) at various point of time. I need to extract the latest data of a particular ID. I was using vlookup but it extract the first entry of that ID but not the latest. and the data is entered into the database using userform and VBA macros.
I am trying to pull data from multiple textboxes on multiple worksheets and compile it into a list on a mastersheet. I have searched multiple forums and I have been unable to piece together anything. I have attached an example workbook of the data that I am trying to compile. I am trying to pull the data for the textbox next to NAME, SS#, and SCHED. I have tried recording a macro for 1 sheet and then modifying the macro to work for on all worksheets but failed miserably.
View 1 Replies View RelatedI have created multiple nametags. I want to use a button which when pressed will run a loop to extract each individual element from the nametag and assigns a value to cell based on that. I have coded for the other functionality that happens when the cell value is changed but can't figure out a way to run the loop.
View 2 Replies View Relatedi have workbook in which I have two sheets, one of them cotains colums with information and in the other sheet I have to create a Search box to retrieve all from any Contact number, of course it has to be based on contact numbers culumn.
example:
CONTACT_NUMBEROPPORTUNITY_TYPEQUARTERCON_TYPECONTRACT_TYPE_DESCRIPTION_LINECURR_CODE
379159OUTSOURCE201002C4PSMARTnet Onsite Premium 2x7x4USD
389859OUTSOURCE201002SNTSMARTnet 85xNBDUSD
379159OUTSOURCE201002C4PSMARTnet Osite Premium 4x7x4USD
388859OUTSOURCE201002SNTSMARTnet 85xNBDUSD
388459OUTSOURCE201002SNTSMARTnet 85xNBDUSD
388459OUTSOURCE201002SNTSMARTnet 85xNBDUSD
and in the other sheet I have to create a search box template that based on the contact number it will retrieve all other information.
When I run it it returns in A1, Jeffrey.Brown2. I would like to turn this into Brown, Jeffrey but because another user may have a shorter or longer name the Left & Right function does not work for every scenario?
Sub who()
Range("A1").Value = Environ("username")
End Sub
=IFERROR(SEARCH("[",string,1),MID(string position,start of char,length of char))
Hi I wish to pull out the characters from a sentence. Once it detects the "[" from the sentence it should pull the string that follow limiting to the length of the character.
It looks like I did something wrong and the results shows only the position of "[" only.
I want to error check because it to return nuthing if there's no value. IF statement would process errors in this case.
I am facing the some issue while tried to display the data from array. Below is code I have to tried to display the data from array.
Scenario: I have assigned the few values in my excel to an array and tried to display the data stored in array
Sub Main()
Dim Rows_Array() As Variant
Dim i As Integer,
Sheets("EmployeeWise").Select
Rows_Array = Range("C6:C" & Range("C65536").End(xlUp).Row).Value
For i = 1 To UBound(Rows_Array())
MsgBox Rows_Array(i)
Next
End Sub
I am looking to find the rider names of the first top 3 position for each stage in Results Page. The data comes from Stage Results. Initially I used Index and Match but to no avail.
Results Page
Stage 1
1
First
2
Second
3
Third
Stage ResultsA
B
C
D
(E)Position
1
Guy LeForge
Commage
6334.030
33
[Code] ..........
How to retrieve value from cells to textboxes, DTPicker, ListBox in a userform ...
View 7 Replies View RelatedI need to retrieve 6 digits (It's really the date in "ddmmyy" format) from a string. If the strings were to follow a standardized format it would be a simple matter of using left, right or mid. However, I have a couple of different scenarios.
The "ddmmyy" I'm looking for may be sandwiched between other characters, separated by a space or remain at the end of the string. Is there a way to sniff out the 6 digits in the string regardless of it's position?
Here are some examples:
1) ABC COMPANY 3.6% 100111-BLAH
2) MCCAIN JOHN4.9%120509
3) ROYAL BK SCOTLAND 4.03% 160309
4) IBRD 8% 090210 BNPHFN00002 HKD5) AUST & NZ BANKING 4.23%161109-EMTN