I am trying to get the data out of a cell and put it in a textbox in my userform. What I have is a Worksheet that has autofilter on. After the user clicks certain objectbuttons, there is only one row, that has data in it, displayed. The cell I'm after will always be in column A and be the second visible row.
retrieving data from financial website databases like yahoofinance.com and bloomberg.com. I'm trying to make an automatic stock analysis model to read from the website database and retrieve the data into excel sheets. For example, when opening the excel model the user gets a popup to enter the stock ticker, the user enters the ticker and gets a set of data. Is this do-able in excel?
i have a long list of what were once file names in excel that i need to retrieve data from. i have attached an example file with 2 file names which i recomend to view while reading this request.the file has 2 spreadsheets. the first one is just the file name in the format in which i recieve it. the second one is a table that i need to fill out from the data in those file names.
i have a problem with the following columns in spreadsheet 2:
1. column C: i have the command to copy the site name as it is to this column, but what i need is for the program to read if the site name is ZANUAH or ADORA and then write only Z or A. note that these two site names have a different number of charecters in them.
2. columnd D: similar problem. i need it to read the lab name and write AL if its MAGAMA, BA if its Ben-Ari and SH if its shafir. i have the command for excel to simply copy the word, but how do i make it write the letters that represent the lab name rather than the lab name itself?
3. column E: the report number is the 6 digit number in the file name. i have the command which retrieves it, but it has trouble when the length of the number changes. its important to note that sometimes the number might contain non-numerical characters like 219641-1.
4. column O:i have the command to get the data from the parentheses next to PSD in the file name into a box. what i need is to get it to copy just the letters C or NC from the file name into this column, without the number.
5. column P: same as column O, but here i need just the number, without the C or NC.
6. column T: all i need is for it to copy the last 2 letters from the file name, which i know how to do. the problem is that since the file names come with a .pdf at the end, all i get is df. so in fact i need it to copy th 6th and the 5th letters from the end of the file name, which is above my abilities.
I have a fairly simple matrix table that im needing help in which way to retrieve the information correctly.
Starting in row 10... My Column A has length that i want to return
My Column B has a minimum value that i need A2 to be larger than, say 20 My Column C has a maximum value that i need A2 to be smaller than. My Columns C & D, E & F, G & H and so on then have different sizes also available... but thats for me to work out later.
Is the best way to achieve this with a series of If statements as Vlookup only returns values to the right, and i want the value on the left, or what is my best way of tackling this problem.
I can attach a sheet that i started if the above makes no sense but my formula is useless so far...
I want to be able to choose a country from a drop-down list, and then have the spreadsheet retrieve/return values from that country, whose input data is located in a different worksheet. E.g. I want to be able to change the input according to what country I am looking at. I was able to do this with simple IF functions,but I'm realizing that this is not good enough. I want to eventually expand the number of countries that I want to return data from, and then the formula is not dynamic enough.
Example spreadsheet attached.
To make it simple: I want to be able to return the correct values for "page views" and "high" and "low" according to what country I choose from the drop-down menu in cell C3 on the "value calculator" sheet.
Also; in cell N15 and N16 I want the alternatives to be yes and no, and they cannot be yes at the same time. H
I'm trying to retrieve data from a workbook that is currently closed. The formula below works only if the workbook containing the data is open. Is there a way to use the following formula to retrieve the data from a closed workbook?
I am trying to work out a forumla that will bring through data onto a worksheet for teacher analysis. The data is being extracted from our MIS and put into the attached template. When I change the class on the analysis sheet I want to be able to the pull through the relevant learners attached to the class along with their data.
I'm trying to create a automated calculator that i can customize and adjust. start and what functions should i be using. I've looked into Vlookup/Hlookup and it does not seem the function i need to make the workbook work. Basically what I need is when I enter a item on the A column excel would retrieve the list of Ingredients to the calculator worksheet and multiply it by the amount of variable entered. Then product will be printed and added together to the "sum row".
I have a googlespreadsheet with 4 columns. date, id, name, positive/negative.
What I would like to be able to do is to call a procedure from an excel document to copy/retrieve all of the information between specified dates on the google spreadsheet and place into another worksheet in the excel document.
The spreadsheet is hosted in my googledrive and is confidential (i.e. I cannot publish it), so I am assuming I will need to add password credentials into the code, which will be an added complication.
I am working on a new budget spreadsheet that I am creating. I want to accurately calculate credit card expenses. As everyone who has a credit card knows, charges made this month are not due to be paid until next month. To make matters more complex, charges made from (for example) January 20 until February 19 are not due to be paid until March 20. With that in mind, I created a spreadsheet with a different tab for each month. Each tab has a place to put in all expenses. Here is an example:
date Category Expenses Remarks
Obviously, The above example is from January. IN the February tab, I want to calculate everything in the "Expense" column that has a date in the "Date" Column before Jan 20 and where it says "Kohls - Frank" in the Category column. Of course, in the March tab, I would need to grab all of the "Kohls - Frank" expenses after Jan 20 from the January tab, and everything before Feb 20 from the February tab.
I figured out how to add up everything with the following formula: =SUMIF(Jan!A:A,("<="&DATE(2013,1,20)&E32),Jan!C:C) How can I filter on the Category tab?
I have two lists. One is a database (Worksheet 2) with a lot of information, and another is the list (worksheet 1) I need to fill up the data for. What I want to do is to search for the names that are in worksheet 1 in worksheet 2, and if there is a match, retrieve the missing data in those rows, and paste it back into worksheet 1. For example: Worksheet 1: Joe Tim 23 Matt
Worksheet 2: Alex 45 Joe 23 Mark 47 Tim 44 Matt 24
I basically want it to be able to search for the corresponding name, and then pull the number associated with it.
I would like to create a summary for the ordering history of each customers. The IT department will facilitate us to generate some raw data and I want to retrieve the data to the summary excel when I type the Ref No of the customer.
For example, I have the following raw data generated, in which the file name is "A123456":
Ref No Name Address
And I want to extract the data to the following summary. When I type "A123456" in the field "Ref Number" in this summary, it will automatically retrieve data from the corresponding raw file:
retrieve the multiple rows of data from one specific item to another worksheet inside same workbook. below attachment is my sample workbook.
inside the workbook, eg.. please have a look on Sheet 3 (the record of the item and its description) will store on Sheet 2. From sheet 1, when user choose the item from drop down list, and click the button will direct to the retrieved result in sheet 2. my question is i cant retrieve the multiple rows of data exactly in the sheet 2. it only remains one item for one row of description.
and below attached picture is what i wish to achieve =)Capture.PNG
I've been unsuccessful in trying to write a formula that retrieves a single result based on two criteria (from a large set of data on a separate worksheet). I've tried various INDEX MATCH combinations but no luck.
A B C D E
1 DATE TEAM PITCHERS RESULT
2 4/1 nyy Sabathia ???????
So this is a very simplified version of my real data set which is about 20 times this size. The first worksheet is where I want to store my retrieved results (lets say D2 for example). I want to retrieve data from the second worksheet that matches two criteria (exactly) originating from my first worksheet. The two criteria to be matched from the first worksheet are, for example, A1 (sabathia) and F2 (the date 4/8). The complicated part is the desired result should be from the corresponding K/9 column in the second sheet, which in this case (based on sabathia and 4/8 criteria) is I2 (result would be 3). It's complicated since I can't just tell the formula to look down a specific K/9 column, I need to search ALL the K/9 columns in the sheet (of which there are many). Is this even possible with some sort of nested INDEX MATCH? Any possibilities outside of VBA programming, or is that the only way?
My data consist of multiple entries of same id(s) at various point of time. I need to extract the latest data of a particular ID. I was using vlookup but it extract the first entry of that ID but not the latest. and the data is entered into the database using userform and VBA macros.
I am currently struggling with a spreadsheet that has been created in Excel 2007. Essentially, it has a number of items (individually identified by "S code" in the first column) that need to be tested at the specific dates over a one year period (i.e. at "2 weeks", "4 weeks", "8 weeks", etc) as shown in the screenshot below.
A user manually enters "Complete" into the corresponding cell in the "In-testing status" section of the spreadsheet when testing has been completed for a certain item at a particular time point.
I already have set up conditional formatting that highlights cells with dates older than the current date red. What I need to do now is to check for a particular item and date whether or not the corresponding "In-testing Status" cell reads "COMPLETE". If it does, I need to use a conditional formatting rule to return formatting to normal.
What I am unsure of is how exactly to retrieve the value of the corresponding "In-testing Status" cell.
Unfortunately I can't use a macro-enabled workbook in this environment
I am trying to pull data from multiple textboxes on multiple worksheets and compile it into a list on a mastersheet. I have searched multiple forums and I have been unable to piece together anything. I have attached an example workbook of the data that I am trying to compile. I am trying to pull the data for the textbox next to NAME, SS#, and SCHED. I have tried recording a macro for 1 sheet and then modifying the macro to work for on all worksheets but failed miserably.
Been looking all day in the answered threads for an answer and no luck, so I turn to again: I need to find an address of a cell matching a condition e.g. I have a results output in varying length but having fixed block structure. I want to find the block staring address as in a Match("test", "A:A", 0).Value command but apparently its an illegal command. I’ve been thinking of a Vlookup(test,”A:A”,0,false) structure but got no idea how to make it return the address instead of a value.
I am trying to find dates & time within text in a cell & return to a separate cell. The issue I have is that the date format varies frequently. I also can't rely on searching for "Sent:" as this also varies frequently
e.g. From: ######## Sent: 17 November 2011 11:57
I would like to return 17/11/2011 11:57
From: ####### Sent: 01/11/2011 11:50:13
I would like to return 01/11/2011 11:50
From: ######## Date: 05/11/2011 09:45:13
How can i search for various forms of dates and return them into a cell?
i need to find a way to search for numbers in a cell that are attached at the end of a group of letters. ex. (xxxxxxxxx01-01-001). i want to search backwards in the cell going right to left. what i need to do is once i find the numbers i need to go to the last number ex. (......x01-.....) and in front of it place a space ex. (......x 01-.......). right now i havent come up with a formula that can do this.
So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at. Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100. Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell. Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in. Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
I have created multiple nametags. I want to use a button which when pressed will run a loop to extract each individual element from the nametag and assigns a value to cell based on that. I have coded for the other functionality that happens when the cell value is changed but can't figure out a way to run the loop.
i have workbook in which I have two sheets, one of them cotains colums with information and in the other sheet I have to create a Search box to retrieve all from any Contact number, of course it has to be based on contact numbers culumn.