I have created multiple nametags. I want to use a button which when pressed will run a loop to extract each individual element from the nametag and assigns a value to cell based on that. I have coded for the other functionality that happens when the cell value is changed but can't figure out a way to run the loop.
View 2 Replies
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
I'm using this code to input values into the next available row of columns of A and B.
Range("A65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox1
Range("B65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox2
I have this piece of code right under it:
Range("E65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Range("B65536").End(xlUp).Offset(1) - Range("A65536").End(xlUp).Offset(1)
The value being returned is 0.
What I want that last part to do is take the last row of column B and subtract the last row in column A.
I have a two dimensional database from which I need to pull information based on multiple listbox values (these listboxes are located in a userform). The user selects one or more cars and then chooses from various parameters for that car. The output has to show the results - for example, if Jeep Cherokee and mpg are chosen, the output will be 23 mpg. I need to be able to do this for multiple cars and multiple parameters.
I need for the outputs to be located in a worksheet. I already have the code for setting up the list of cars and parameters selected (this gives me a row and column header), but now I need to be able to cross reference this information to pull the output from the master database. I was wondering if I can use a vlookup function to do this, but I've never used it with 2 dimensional data.
I am trying to use a lookup to find the quantity of a certain fabric. However, more than one style uses the same type of fabric. Is there a way to do a lookup that retrieves multiple values?
View 1 Replies View RelatedHow can I add an array of values to a listobject, preferably in one big chunk? How can I read a chunk of values from a listobject into an array?
For the latter, I've tried:
I have a series of tabs in my sheet, the first one is called 'START', the last one 'END', and between them a series of other identical sheets ('Division 1', 'Division 2'... etc). In each of the 'Division' tabs, cell A1 (say) contains a string that I need to retrieve and order into a list on a summary sheet. The order doesn't really matter (i.e. it doesn't have to be alphabetical or anything), though it would be useful if there were no gaps in the list.
View 1 Replies View RelatedI am setting up a questionnaire which needs to be dynamic. The questions in the questionnaire are pulled from a 'baseline sheet' using check boxes and an if statement, i.e. each question in the baseline sheet has a tickbox next to it, and if it is checked then the question is populated into the questionnaire sheet.
Im wondering if there anyway for the worksheet to populate the input cell with the next cell value from the baseline sheet if the first is blank? So if a box is not ticked, it will intelligently seek out the next box that has been ticked and retrieve that value. Essentially, my goal is to not have any blank spaces in the questionnaire which is what is happening now.
So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at.
Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100.
Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell.
Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in.
Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5.
Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
I have a spreadsheet with several tabs. I am wanting to lookup data in tab "A" based on data in a list. For example:
I may have:
Tab A
Tab B
Tab C
Tab D
Tab E
I have created a validation list containing A, B C, D, E I would like to use Hlookup to look up data imported into the table in Date order.
i have workbook in which I have two sheets, one of them cotains colums with information and in the other sheet I have to create a Search box to retrieve all from any Contact number, of course it has to be based on contact numbers culumn.
example:
CONTACT_NUMBEROPPORTUNITY_TYPEQUARTERCON_TYPECONTRACT_TYPE_DESCRIPTION_LINECURR_CODE
379159OUTSOURCE201002C4PSMARTnet Onsite Premium 2x7x4USD
389859OUTSOURCE201002SNTSMARTnet 85xNBDUSD
379159OUTSOURCE201002C4PSMARTnet Osite Premium 4x7x4USD
388859OUTSOURCE201002SNTSMARTnet 85xNBDUSD
388459OUTSOURCE201002SNTSMARTnet 85xNBDUSD
388459OUTSOURCE201002SNTSMARTnet 85xNBDUSD
and in the other sheet I have to create a search box template that based on the contact number it will retrieve all other information.
When I run it it returns in A1, Jeffrey.Brown2. I would like to turn this into Brown, Jeffrey but because another user may have a shorter or longer name the Left & Right function does not work for every scenario?
Sub who()
Range("A1").Value = Environ("username")
End Sub
retrieving data from financial website databases like yahoofinance.com and bloomberg.com. I'm trying to make an automatic stock analysis model to read from the website database and retrieve the data into excel sheets. For example, when opening the excel model the user gets a popup to enter the stock ticker, the user enters the ticker and gets a set of data. Is this do-able in excel?
View 2 Replies View Relatedi have a long list of what were once file names in excel that i need to retrieve data from. i have attached an example file with 2 file names which i recomend to view while reading this request.the file has 2 spreadsheets. the first one is just the file name in the format in which i recieve it. the second one is a table that i need to fill out from the data in those file names.
i have a problem with the following columns in spreadsheet 2:
1. column C: i have the command to copy the site name as it is to this column, but what i need is for the program to read if the site name is ZANUAH or ADORA and then write only Z or A. note that these two site names have a different number of charecters in them.
2. columnd D: similar problem. i need it to read the lab name and write AL if its MAGAMA, BA if its Ben-Ari and SH if its shafir. i have the command for excel to simply copy the word, but how do i make it write the letters that represent the lab name rather than the lab name itself?
3. column E: the report number is the 6 digit number in the file name. i have the command which retrieves it, but it has trouble when the length of the number changes. its important to note that sometimes the number might contain non-numerical characters like 219641-1.
4. column O:i have the command to get the data from the parentheses next to PSD in the file name into a box. what i need is to get it to copy just the letters C or NC from the file name into this column, without the number.
5. column P: same as column O, but here i need just the number, without the C or NC.
6. column T: all i need is for it to copy the last 2 letters from the file name, which i know how to do. the problem is that since the file names come with a .pdf at the end, all i get is df. so in fact i need it to copy th 6th and the 5th letters from the end of the file name, which is above my abilities.
I am trying to get the data out of a cell and put it in a textbox in my userform.
What I have is a Worksheet that has autofilter on. After the user clicks certain objectbuttons, there is only one row, that has data in it, displayed. The cell I'm after will always be in column A and be the second visible row.
I have a fairly simple matrix table that im needing help in which way to retrieve the information correctly.
Starting in row 10...
My Column A has length that i want to return
My Column B has a minimum value that i need A2 to be larger than, say 20
My Column C has a maximum value that i need A2 to be smaller than.
My Columns C & D, E & F, G & H and so on then have different sizes also available... but thats for me to work out later.
Is the best way to achieve this with a series of If statements as Vlookup only returns values to the right, and i want the value on the left, or what is my best way of tackling this problem.
I can attach a sheet that i started if the above makes no sense but my formula is useless so far...
=IFERROR(SEARCH("[",string,1),MID(string position,start of char,length of char))
Hi I wish to pull out the characters from a sentence. Once it detects the "[" from the sentence it should pull the string that follow limiting to the length of the character.
It looks like I did something wrong and the results shows only the position of "[" only.
I want to error check because it to return nuthing if there's no value. IF statement would process errors in this case.
I have the following in Column A. 01. Artist - Title
I manage to put 01 in Column B and Title in Column D
I am struggling to split between the "." and the "-" to show Artist in Column C
I am using in Column B
I am facing the some issue while tried to display the data from array. Below is code I have to tried to display the data from array.
Scenario: I have assigned the few values in my excel to an array and tried to display the data stored in array
Sub Main()
Dim Rows_Array() As Variant
Dim i As Integer,
Sheets("EmployeeWise").Select
Rows_Array = Range("C6:C" & Range("C65536").End(xlUp).Row).Value
For i = 1 To UBound(Rows_Array())
MsgBox Rows_Array(i)
Next
End Sub
I am looking to find the rider names of the first top 3 position for each stage in Results Page. The data comes from Stage Results. Initially I used Index and Match but to no avail.
Results Page
Stage 1
1
First
2
Second
3
Third
Stage ResultsA
B
C
D
(E)Position
1
Guy LeForge
Commage
6334.030
33
[Code] ..........
How to retrieve value from cells to textboxes, DTPicker, ListBox in a userform ...
View 7 Replies View RelatedI need to retrieve 6 digits (It's really the date in "ddmmyy" format) from a string. If the strings were to follow a standardized format it would be a simple matter of using left, right or mid. However, I have a couple of different scenarios.
The "ddmmyy" I'm looking for may be sandwiched between other characters, separated by a space or remain at the end of the string. Is there a way to sniff out the 6 digits in the string regardless of it's position?
Here are some examples:
1) ABC COMPANY 3.6% 100111-BLAH
2) MCCAIN JOHN4.9%120509
3) ROYAL BK SCOTLAND 4.03% 160309
4) IBRD 8% 090210 BNPHFN00002 HKD5) AUST & NZ BANKING 4.23%161109-EMTN
how to retrive and display Data. I've attached an excel file with the macros. That what I need is to be coded in Module1.
View 6 Replies View RelatedIs there an easy way to print out the Red Green and Blue settings (i.e. numerical values) for the current pallette in a workbook?
I can set them fine and transfer them between workbooks but that's not quite what I need.
I have tried to find how to retrieve a worksheet from a closed workbook and I am almost sure that there was an answer how to do this in FAQ but I cannot seem to find it, does anyone know where this thread is?
View 7 Replies View Related1) I have created a pivot table where one of the value is minimum of a "Rate". So far, so good.
2) Is there a way I can access other column values from the same row "MIN" value was picked up from ? Or I have do a VLOOKUP & INDEX ?
Attached is my excel that has sample data and what I need.
I want to be able to choose a country from a drop-down list, and then have the spreadsheet retrieve/return values from that country, whose input data is located in a different worksheet. E.g. I want to be able to change the input according to what country I am looking at. I was able to do this with simple IF functions,but I'm realizing that this is not good enough. I want to eventually expand the number of countries that I want to return data from, and then the formula is not dynamic enough.
Example spreadsheet attached.
To make it simple: I want to be able to return the correct values for "page views" and "high" and "low" according to what country I choose from the drop-down menu in cell C3 on the "value calculator" sheet.
Also; in cell N15 and N16 I want the alternatives to be yes and no, and they cannot be yes at the same time. H
I am currently struggling with a spreadsheet that has been created in Excel 2007. Essentially, it has a number of items (individually identified by "S code" in the first column) that need to be tested at the specific dates over a one year period (i.e. at "2 weeks", "4 weeks", "8 weeks", etc) as shown in the screenshot below.
A user manually enters "Complete" into the corresponding cell in the "In-testing status" section of the spreadsheet when testing has been completed for a certain item at a particular time point.
Screenshot.jpg
I already have set up conditional formatting that highlights cells with dates older than the current date red. What I need to do now is to check for a particular item and date whether or not the corresponding "In-testing Status" cell reads "COMPLETE". If it does, I need to use a conditional formatting rule to return formatting to normal.
What I am unsure of is how exactly to retrieve the value of the corresponding "In-testing Status" cell.
Unfortunately I can't use a macro-enabled workbook in this environment
I'm trying to retrieve data from a workbook that is currently closed. The formula below works only if the workbook containing the data is open. Is there a way to use the following formula to retrieve the data from a closed workbook?
[Code] ......
I am trying to work out a forumla that will bring through data onto a worksheet for teacher analysis. The data is being extracted from our MIS and put into the attached template. When I change the class on the analysis sheet I want to be able to the pull through the relevant learners attached to the class along with their data.
View 5 Replies View Related
