I wanted to retrieve data from horizontal cells to the combobox i created on the userform.
I tried watching some code from other progs, but its not working.
From my combobox1, I want to go read the data from the sheet "TMATERIAL", range "b3:h3"
Normally the combo box will reading the data range from top to bottom. Is there any way to allow the combo box to reading the data from left to right? when i cover, it only reading the first cell of data range.
View 8 Replies View RelatedHow to retrieve value from cells to textboxes, DTPicker, ListBox in a userform ...
View 7 Replies View RelatedI've done define name to read column C until G in 1st row, N define another name from column C until G in 2nd row.For example; NameRanges for "Year" =OFFSET(Sheet2!$C$1,0,0,1,COUNTA(Sheet2!$1:$1)-2), for
"Thickness" = OFFSET(Sheet2!$C$2,0,0,1,COUNTA(Sheet2!$2:$2)-3)
I want to display list of year in combobox and then, when the user click on the first item in combobox, the textbox will display the value that correspond to the combobox. For example; when the user click Year = 1990 in the combobox, the textbox will take value from excel and display thickness for year 1990 which is 4.
This is my code, the code in UserForm_Initialize is working. unfortunately, coding to display value in TextBox1, doesnt work.
VB:
Private Sub UserForm_Initialize()
Dim rngYear As Range [code].....
Using my workbook i want to modify the entries of a worksheet. If u hit the Commandbutton1 , u can see that i have a userform with 3 pages.
The 1st page is to create a formula
The 2nd page is to modify the formula
The 3nd page is to delete the formula
What i want is the following:
1-Using the 2nd page I want to select a formula description and then to modify the description or the formula or both. After that, if i hit the Ok button to save it.
2-Using the 3nd page I want to select a formula description and then if i hit the Ok button and Delete the selected formula i want the bar to move to the previous row of the deleted one. Eg.: If i delete the row 10 i want the bar to move to row 9.
3-At last ,if u think that u have to change parts of my code and make it better go ahead.
So in this userform I am want it to add data to the main list of products. But, I ALSO want it to add to the specific list by selection of the data in the combo box.
It already adds the data to the main list. Now I want to be able to select the data in the combo box and have the userform data put in the specific combo box list.
In VBA editor it is the Inventory macro:
I want the macro to work exactly as it does right now, but I ALSO want the Combobox1 to dictate where Textbox1 and Textbox2 are added in a separate list on the products sheet.
I have a combo box on my userform. The selection made in the combobox will eventually control a calculation. I would like to generate some code so that when the user makes a selection in the combo box, and fills in all the requied info on the form, they can click a button on the userform which will generate a new combobox on the worksheet which would contain the user selection, along with the array that populates the combobox on the userform.
View 3 Replies View RelatedI need to populate a combo box on a form with the column name (A,B,C...etc) and the first row data. I need the code to check all columns in-case of missing column data.
Its important to note the data will be dynamic. In my add in, a form opens on requests and asks the user which column he needs to action data on. this could be on any one of several non similar spreadsheets.
E.G.: Combox to hold the following data (see column D has no data or header row):
Column A - Date
Column B - Rep
Column C - Customer
Column D -
Column E - Product
How can i pass this info to the form ?
I have created a userform and it works fine.Following code is assigned to commandbutton to transfer data to sheet "FT".
[Code].....
I want to add that : If value in combobox2 is “ KT” then all entries are copied to sheet3
Otherwise copy everything in sheet”FT”
Other parameters remain same.
The macro below in its current state adds data entered from the userform to a specific sheet. I would like to change it so that a player can be selected from combobox named txtmplayer and the data entered be copied to that specific players sheet.
If this information is vital: There are 8 players. Player sheets can be named player1, player2, and so on. I would like to keep same method for entry (finds first available row)
I am trying to create a userform to allow user to register their new team member. In the userform, I have textbox1 (new team member) & textbox2 ( name of their leader). Once both the textbox has been filled, the user need to click on the commandbutton, which will then add the newly registered team member to the combobox1 in the Sheet1 and then create a spreadsheet(tab with the Team member name) in a separate workbook, which corresponde with the name of their leader (as filled in textbox2 in the userform.
View 2 Replies View RelatedMy question is, instead of deleting the row, how can I use the combobox to replace that row with the updated info rather than delete and resort? I have a combobox that selects names from a sheet, column A and populates itself on Userform activate/initalize. Using the Combobox to select a name, this code below populates all the fields on the form, various text and comboboxs.
When users hits the update button, it currently finds the row and deletes it, see second code example, but this reaks havoc on various parts of the program, I have to move the combobox and add name textbox's because when it deletes the row, the combobox takes on the next rowsource and then writes that info, rather than the info selected.
Private Sub ComboBox1_Change()
If bBlockEvents = True Then Exit Sub
If ComboBox1.Value = "" Then
Reset
bBlockEvents = True
ComboBox1.ListIndex = -1
bBlockEvents = False
Exit Sub
End If
userow = ComboBox1.ListIndex + 3
usercolumn = 1
If userow = "0" Then
ComboBox1.Value = ""
Reset
Else.......................
Is there any way to set the list from a Combo Box to automatically start in the middle?
Whenever I select a Combo Box, the drop down list always automatically starts at the top of my selected range, ideally I would like it to start in the middle.
For example my Range that I am filling the Combo Box with lists dates: Today()-7 to Today()+7.
At the moment the first item in the combo box list is Today()-7, I would like it to be Today().
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long
[Code]....
i need to be able to fill a combo box on a userform with the data on sheet1 and when you select the item from the combobox it will populate the textbox below.
View 5 Replies View RelatedI am writing a UserForm and only one of my comboboxes is correctly outputting to the assigned worksheet. All of the textboxes, radio buttons, and checkboxes are working properly. It is my first time designing a UserForm. Attached is the code - maybe someone can see the error that is allowing only cboq4d to be transferred to the worksheet (named DataBase).
Private Sub cmdClear_Click()
Call UserForm_Initialize
End Sub
Private Sub cmdOK_Click()
Call UserForm_Initialize
ActiveWorkbook.Sheets("DataBase").Activate
Range("A1").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select................
I have a userform that has a combobox in it that also has an OK button and a Cancel Button. Need getting the combobox to pull in the correct list? The data for this list will be in cells A2 through A16. But not all 15 lines will always have data in them so I'd like to only show the ones with data. Then next issue i have is I would like the OK button on this userform to actually erase the data the user has clikced on in the combobox. It's a list of kids that the userform is asking which one needs to be deleted. So it might be the kid in cell A9. so when the user clicks on that kid in the combobox form a9 and hits ok I'd like to have all the kids below A9 move up one row.
Windows XP
excel 2003
I have a user form that has one combo box on it that right now references one column of data.
Now I am being asked to have three columns of data and the combo box to show one of the three when a certain criteria is met.
I believe it would be easiest to have an additional combox with a change event when the box is populated with "whatever" in the field
So S:3 to S:5 have A, B, C
And EC:1-EC:59, ED:1-ED:59, EE:1-EE:59 contain the data that should show when S:3, S:4, or S:5 is selected.
If S:3 is selected then the list in EC:1 - EC59 would show and so on.
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View RelatedI have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies View RelatedI'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
I have a spreadsheet with several tabs. I am wanting to lookup data in tab "A" based on data in a list. For example:
I may have:
Tab A
Tab B
Tab C
Tab D
Tab E
I have created a validation list containing A, B C, D, E I would like to use Hlookup to look up data imported into the table in Date order.
retrieving data from financial website databases like yahoofinance.com and bloomberg.com. I'm trying to make an automatic stock analysis model to read from the website database and retrieve the data into excel sheets. For example, when opening the excel model the user gets a popup to enter the stock ticker, the user enters the ticker and gets a set of data. Is this do-able in excel?
View 2 Replies View Relatedi have a long list of what were once file names in excel that i need to retrieve data from. i have attached an example file with 2 file names which i recomend to view while reading this request.the file has 2 spreadsheets. the first one is just the file name in the format in which i recieve it. the second one is a table that i need to fill out from the data in those file names.
i have a problem with the following columns in spreadsheet 2:
1. column C: i have the command to copy the site name as it is to this column, but what i need is for the program to read if the site name is ZANUAH or ADORA and then write only Z or A. note that these two site names have a different number of charecters in them.
2. columnd D: similar problem. i need it to read the lab name and write AL if its MAGAMA, BA if its Ben-Ari and SH if its shafir. i have the command for excel to simply copy the word, but how do i make it write the letters that represent the lab name rather than the lab name itself?
3. column E: the report number is the 6 digit number in the file name. i have the command which retrieves it, but it has trouble when the length of the number changes. its important to note that sometimes the number might contain non-numerical characters like 219641-1.
4. column O:i have the command to get the data from the parentheses next to PSD in the file name into a box. what i need is to get it to copy just the letters C or NC from the file name into this column, without the number.
5. column P: same as column O, but here i need just the number, without the C or NC.
6. column T: all i need is for it to copy the last 2 letters from the file name, which i know how to do. the problem is that since the file names come with a .pdf at the end, all i get is df. so in fact i need it to copy th 6th and the 5th letters from the end of the file name, which is above my abilities.
I am trying to get the data out of a cell and put it in a textbox in my userform.
What I have is a Worksheet that has autofilter on. After the user clicks certain objectbuttons, there is only one row, that has data in it, displayed. The cell I'm after will always be in column A and be the second visible row.
I have a fairly simple matrix table that im needing help in which way to retrieve the information correctly.
Starting in row 10...
My Column A has length that i want to return
My Column B has a minimum value that i need A2 to be larger than, say 20
My Column C has a maximum value that i need A2 to be smaller than.
My Columns C & D, E & F, G & H and so on then have different sizes also available... but thats for me to work out later.
Is the best way to achieve this with a series of If statements as Vlookup only returns values to the right, and i want the value on the left, or what is my best way of tackling this problem.
I can attach a sheet that i started if the above makes no sense but my formula is useless so far...
I have the following in Column A. 01. Artist - Title
I manage to put 01 in Column B and Title in Column D
I am struggling to split between the "." and the "-" to show Artist in Column C
I am using in Column B
I want to be able to choose a country from a drop-down list, and then have the spreadsheet retrieve/return values from that country, whose input data is located in a different worksheet. E.g. I want to be able to change the input according to what country I am looking at. I was able to do this with simple IF functions,but I'm realizing that this is not good enough. I want to eventually expand the number of countries that I want to return data from, and then the formula is not dynamic enough.
Example spreadsheet attached.
To make it simple: I want to be able to return the correct values for "page views" and "high" and "low" according to what country I choose from the drop-down menu in cell C3 on the "value calculator" sheet.
Also; in cell N15 and N16 I want the alternatives to be yes and no, and they cannot be yes at the same time. H
I'm trying to retrieve data from a workbook that is currently closed. The formula below works only if the workbook containing the data is open. Is there a way to use the following formula to retrieve the data from a closed workbook?
[Code] ......
I am trying to work out a forumla that will bring through data onto a worksheet for teacher analysis. The data is being extracted from our MIS and put into the attached template. When I change the class on the analysis sheet I want to be able to the pull through the relevant learners attached to the class along with their data.
View 5 Replies View Related