Retrieving Textbox Data From Multiple Worksheets Into List On Mastersheet?
Sep 20, 2013
I am trying to pull data from multiple textboxes on multiple worksheets and compile it into a list on a mastersheet. I have searched multiple forums and I have been unable to piece together anything. I have attached an example workbook of the data that I am trying to compile. I am trying to pull the data for the textbox next to NAME, SS#, and SCHED. I have tried recording a macro for 1 sheet and then modifying the macro to work for on all worksheets but failed miserably.
I'm trying to synthesize a fair amount of averages response time data from about 300 separate worksheets into one master sheet and I'm wondering what the best way is to do it using Excel's macros.
In each subject condition-worksheet there are 24 cell items that need to be pulled and put into the master worksheet; there are 2 conditions, for a total of 48 line items.
In each subject file, the subject number is in cell A1, my first desired average is in M7, then M15, M23, M31, M39, M47, M55, M63, then it repeats back to M9, M17, M25, etc..
How can I create a macro that creates a new line for each subject (starting with row 2) first with their subject number (A1 in all subject files), then M7, M15, M23, M31, M39, etc. moving across the row?
I have two lists. One is a database (Worksheet 2) with a lot of information, and another is the list (worksheet 1) I need to fill up the data for. What I want to do is to search for the names that are in worksheet 1 in worksheet 2, and if there is a match, retrieve the missing data in those rows, and paste it back into worksheet 1. For example: Worksheet 1: Joe Tim 23 Matt
Worksheet 2: Alex 45 Joe 23 Mark 47 Tim 44 Matt 24
I basically want it to be able to search for the corresponding name, and then pull the number associated with it.
I am trying to write a Macro so that my Mastersheet has a command button, that when clicked, will update itself with information from 5 other worksheets. I only need it to update new data and not data that is already there and i need it to copy it into the mastersheet in the next available blank row.
I am working with a mastersheet created by someone else and I have created the 5 worksheets. All the columns are exactly the same in both the worksheets and mastersheet. The mastersheet has 2 sheets, the front sheet ("Front Page") has the command button and the second sheet ("Activity Log") is where i want the new data to appear. I have very little knowledge of VBA, I have recorded a few macros and have used that to create the code i need to open a closed worksheet but I dont know where to go from there.
I have a Master list of kids names and age groups, that will be used by Coaches to update, from this i would like to have each of the different age groups details extracted into different worksheets within the same workbook.
I used an IF statement to but found it was leaving blank lines between finds.
I want to be able to choose a country from a drop-down list, and then have the spreadsheet retrieve/return values from that country, whose input data is located in a different worksheet. E.g. I want to be able to change the input according to what country I am looking at. I was able to do this with simple IF functions,but I'm realizing that this is not good enough. I want to eventually expand the number of countries that I want to return data from, and then the formula is not dynamic enough.
Example spreadsheet attached.
To make it simple: I want to be able to return the correct values for "page views" and "high" and "low" according to what country I choose from the drop-down menu in cell C3 on the "value calculator" sheet.
Also; in cell N15 and N16 I want the alternatives to be yes and no, and they cannot be yes at the same time. H
I'm trying to create a automated calculator that i can customize and adjust. start and what functions should i be using. I've looked into Vlookup/Hlookup and it does not seem the function i need to make the workbook work. Basically what I need is when I enter a item on the A column excel would retrieve the list of Ingredients to the calculator worksheet and multiply it by the amount of variable entered. Then product will be printed and added together to the "sum row".
I am trying to create a list of residents, unit types, and unit numbers. I have 3 problems with the following code.
1) The code ignores sheets that have no value in the specified cell. I need it to return a blank cell for those in order to keep the data in each column matched with the sheet it came from.
2) The code includes data from hidden sheets. I only want to list data from unhidden sheets. And more specifically, I want to omit data from unhidden sheets that have their tab colored black.
3) The code includes data from the sheet named "Totals" which I thought I was telling it to ignore.
I'm trying to solve i have multiple books but each book contains same information e.g
Book1 Sheet 1 Date Name
Sheet 2 Location Postcode
Book 2 Sheet 1 Date Name
Sheet 2 Location Postcode
etc ... there is also multiple sheets in each book all are same layout just each book is different customer.
I'm trying to do is have a Listbox that shows all customer name and link back to His/her file location. Then retrieve certain information and display on blank workbook?
Question: Can this be done without opening workbook Considering i have 20+ workbooks and growing is this even possible Cannot merge workbooks into one as this info is supplied by third party
retrieve the multiple rows of data from one specific item to another worksheet inside same workbook. below attachment is my sample workbook.
inside the workbook, eg.. please have a look on Sheet 3 (the record of the item and its description) will store on Sheet 2. From sheet 1, when user choose the item from drop down list, and click the button will direct to the retrieved result in sheet 2. my question is i cant retrieve the multiple rows of data exactly in the sheet 2. it only remains one item for one row of description.
and below attached picture is what i wish to achieve =)Capture.PNG
I am setting up a questionnaire which needs to be dynamic. The questions in the questionnaire are pulled from a 'baseline sheet' using check boxes and an if statement, i.e. each question in the baseline sheet has a tickbox next to it, and if it is checked then the question is populated into the questionnaire sheet.
Im wondering if there anyway for the worksheet to populate the input cell with the next cell value from the baseline sheet if the first is blank? So if a box is not ticked, it will intelligently seek out the next box that has been ticked and retrieve that value. Essentially, my goal is to not have any blank spaces in the questionnaire which is what is happening now.
I want to be able to pick a word from a drop down list and for related information to appear in the next cell. I just don't know the function to do it.
Here's an example: I have a list of first names and second names in adjacent columns. Excel question 1.jpg
In the 2nd sheet I have a drop down list of the first names:
Excel question 2.jpg
Is there a function to make the corresponding 2nd name appear in B1 when a first name is selected. I've seen examples where INDIRECT is used to create a dependent drop down list in B1 but I'd like the information to automatically appear.
I am wanting to make a table that shows values from multiple sheets. The individual sheets are essentially a template, and I would like to be able to grab a value from the same cell in different sheets and make a table. Can I do it without having to get each value individually? Perhaps put most clearly, I would like to have a table that shows the value at 'C1' in each sheet without having to manually select 'C1' from each sheet.
I need to lookup & count the number of cells from column I to BH with values greater than 0 in sheet 2 and return the results to the corresponding list of items in sheet 1. However, the data in sheet 2 have duplicate list of items and may have duplicate values as well from Column I to BH which I wanted to be counted as 1 only. I'm attaching a file as a reference.
I'm simply trying to take for example cell A1 from multiple sheets and list them vertically on a master sheet. When you drag it down it does not alter the sheet number, that just stays static.
I am trying to automatically insert multiple (100) worksheets using VBA. The names I need each worksheet to be named are in a list in a separate worksheet in the same workbook. I found this site: http://www.mindspring.com/%7Etflynn/excelvba3.html and have been trying to adapt the following
Sub AddSheetWithNameCheckIfExists() Dim ws As Worksheet Dim newSheetName As String newSheetName = Sheets(1).Range("A2") ' Substitute your range here For Each ws In Worksheets If ws.Name = newSheetName Or newSheetName = "" Or IsNumeric(newSheetName) Then MsgBox "Sheet already exists or name is invalid", vbInformation Exit Sub End If Next Sheets.Add Type:="Worksheet" With ActiveSheet .Move after:=Worksheets(Worksheets.Count) .Name = newSheetName End With End Sub
I am having difficulty iterating the code from cell A2 to A102.
I have this workbook with 22 sheets and 21 are hidden. On the one open sheet there is a button that opens a userform with a listbox. I have radio buttons on the side to control whether the list box allows single selection, multiple selection, and extended selection. I want to change extended to open all sheets.
Anyway, I have the list box populated but I can't figure out how to code opening single sheets, multiple sheets, or all sheets depending on the radio button selected when the OK button is pressed. I know the listbox depends on the selected property but I am stuck. Here is the code I had but it is a mess. I am still new to VBA.
Private Sub OKButton_Click() Dim Msg As String Dim i As Integer Dim UserSheet As Object If ListBox1.ListIndex = -1 Then Msg = "Please select a sheet." Else Msg = "" For i = 0 To ListBox1.ListCount - 1 If ListBox1.Selected(i) Then For Each i In ListBox1..........................
I'm trying to get this formula to work across multiple worksheets. It suppose to list names in alphabetical order. I'm using these define names to get it to work. Also may I have another formula that list unique names in alphabetical order?
I am attaching a file that I have just really been struggling with. I have been through multiple forums and ideas but just can not seem to find one that will completely resolve my issues. There are two tabs in the spreadsheet. I want to bring information from the detailed one over to a summary. Please take into consideration that this has been extremely simplified from my original information just so that I could post it. I am not going to use pivot tables, as this is going to be distributed to others at some point so most information will be hidden except the summary. The product and type are normally coming from a drop down list also. The summary format is by request of management so not much choice in changing it.
I am trying to use a lookup to find the quantity of a certain fabric. However, more than one style uses the same type of fabric. Is there a way to do a lookup that retrieves multiple values?
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
I am hoping to create a drop down list of months in one sheet, and when I select a certain month, columns in about 10 other worksheets in the same workbook will either hide or unhide columns...
The spreadsheet is laid out with columns (C-N) for each month in the year, for actuals, then columns for budget and budget variance (O-P), then YTD Actual, YTD Budget and YTD Variance. When I select September, for example, I want October-December to hide, and leave Jan-Sep unhidden, while keeping the budget, YTD and variance columns.
I have a text data stored in same cell of different worksheets on the same file. I need to list them down in a single fresh worksheet. Is there any formula or any way that I may use?
The Data Worksheet in the file attached lists information on various software packages a company sells. Each product has an associated category listed in column B. Write a sub that creates a worksheet for each category represented in the list, with the name of the worksheet being the category, such as Business. For each category worksheet, it should enter the product names and their prices in columns A and B, starting in row 4. Each category worksheet should have an appropriate label, such as “Products in the Business category”, in cell A1; it should have labels “Product” and “Price” in cells A3 and B3; and the column width for its column A should be the same as the column width of Column A in the Data worksheet. ( Note that there are only three categories represented in the current data. However, the program should be written so that it Works for any number of categories – and any number of products- that might be present.)
I have the following code, it works properly when I run it for the first time but fails to re-run for the other coming runs.
This is what the data sheet looks like: [URL] .......
Code: Sub Business() Dim Data() As String Dim blnCheck As Boolean Dim intProdCnt As Integer Dim i As Integer Dim wksC As Excel.Worksheet
retrieving data from financial website databases like yahoofinance.com and bloomberg.com. I'm trying to make an automatic stock analysis model to read from the website database and retrieve the data into excel sheets. For example, when opening the excel model the user gets a popup to enter the stock ticker, the user enters the ticker and gets a set of data. Is this do-able in excel?
i have a long list of what were once file names in excel that i need to retrieve data from. i have attached an example file with 2 file names which i recomend to view while reading this request.the file has 2 spreadsheets. the first one is just the file name in the format in which i recieve it. the second one is a table that i need to fill out from the data in those file names.
i have a problem with the following columns in spreadsheet 2:
1. column C: i have the command to copy the site name as it is to this column, but what i need is for the program to read if the site name is ZANUAH or ADORA and then write only Z or A. note that these two site names have a different number of charecters in them.
2. columnd D: similar problem. i need it to read the lab name and write AL if its MAGAMA, BA if its Ben-Ari and SH if its shafir. i have the command for excel to simply copy the word, but how do i make it write the letters that represent the lab name rather than the lab name itself?
3. column E: the report number is the 6 digit number in the file name. i have the command which retrieves it, but it has trouble when the length of the number changes. its important to note that sometimes the number might contain non-numerical characters like 219641-1.
4. column O:i have the command to get the data from the parentheses next to PSD in the file name into a box. what i need is to get it to copy just the letters C or NC from the file name into this column, without the number.
5. column P: same as column O, but here i need just the number, without the C or NC.
6. column T: all i need is for it to copy the last 2 letters from the file name, which i know how to do. the problem is that since the file names come with a .pdf at the end, all i get is df. so in fact i need it to copy th 6th and the 5th letters from the end of the file name, which is above my abilities.
I am trying to get the data out of a cell and put it in a textbox in my userform. What I have is a Worksheet that has autofilter on. After the user clicks certain objectbuttons, there is only one row, that has data in it, displayed. The cell I'm after will always be in column A and be the second visible row.
