Returning 0 Instead Of Blank
Oct 16, 2012
Below formula matches two criteria
=SUMPRODUCT(('[Value.xlsx]test!$B$5:$B$50=$B5)*('[Value.xlsx]test'!$C$5:$C$50=$C5)*('[Value,xlsx]test'!D$5:D$50)).
What it does is:
Matching B5 value in range B5:B10 of tab "test" in worksheet "Value"
Matching C5 value in range C5:C10 of tab "test" in worksheet "Value"
AND capturing the matching value in range D5:D50.
The problem is that i am getting 0 if the matching value is a blank or 0.
I want the formula to return nothing (i.e. blank) when the matching value is blank and 0 only when the matching value is actually 0.
View 3 Replies
ADVERTISEMENT
Jan 7, 2013
I'm linking one sheet in a workbook to another. The formula is simple,
='Link 1'!E1
If there is data in the cell, it replicates it which is what I'm after. However if there is no data in the cell it returns a "0", not what I want at all.
View 2 Replies
View Related
May 28, 2009
I have a current formula using SUM formulas obviously in the answer cell the answer is returning 0 due to no data inputed, how do i make the cell show empty.
eg. =SUM(A1*A3) returns answer 0 need cell to be blank.
View 2 Replies
View Related
Oct 22, 2011
I am using the following formula to return an "F" in the cell. If there is no "F" it just returns "#N/A". Is it possible to have the cell blank instead of the #N/A? If so how do I do it?
=INDEX(E1:E99,MATCH(1,(A1:A99=Selections!J5)*(E1:E99="F"),0))
and then ctrl + shift + enter
View 2 Replies
View Related
Apr 14, 2014
My formula is returning a 0 when true instead of being blank as specified. If I designate a value other than "blank" (i.e. "A Word") it still returns a 0. What am I doing wrong?
=IF(AND(CBAuditType="PHYSICAL",TxtInsuredName=""),"",TxtInsuredName)
View 7 Replies
View Related
Apr 25, 2014
I want to be able to return the value of the last non-blank cell in the horizontal range L3:BF3. This would need to account for any blank cells that might occur within the range. Those 'blank' cells would contain formulae and the non-blank cells would contain GCSE grades from A* down to U or National Curriculum levels in the format nx (e.g. 3a). I would need to be able to copy the formula down to other rows. The reason I'm not keen on an array formula is because they can slow things down, as I understand it.
I'm afraid I don't have a sample worksheet as this is all, for now at least, an emerging plan in my head. I should probably add that the grades will not necessarily increase in value in the range, so we're not looking for the largest.
View 10 Replies
View Related
Nov 13, 2008
If it can not locate the correct responce I want it the formula cell to be blank. How do I adjust my formula to do this?
This is the forumal I am currently using
=VLOOKUP(A26,Subs!A:F,5,0)
I have also tried this one as well
=IF(ISNA(VLOOKUP(A6,Subs!A:E,5,0))+(VLOOKUP(A6,Subs!A:E,5,0)=""),"",VLOOKUP(A6,Subs!A:E,5,0))
View 3 Replies
View Related
Jun 23, 2013
I am trying to get data in excel sheet using web query from the following web link:
But I the data returned is a 'hypen' (i.e. a dash symbol). I am getting the row/column headers but not the figures or the numbers under them.
View 2 Replies
View Related
Apr 6, 2014
Referenced cells returning zeros: can these be made blank or string data?
But why I still get the value 0 instead of blank cell when I press ctrl+shift+enter?
My formula = IF(U15="Bank", PROPER(E15),"")
and E15 = VLOOKUP(B15,'Customer Data'!$D$6:$K$100,3,FALSE)
View 5 Replies
View Related
Dec 19, 2011
I am trying to trigger a formula if a cell (B2) is populated (with anything) but if it is blank for the destination cell to remain blank.
The formula I am trying to trigger is =IF(G18=0,100,100-(100/(1+H18))).
View 2 Replies
View Related
Apr 11, 2014
I'm currently using the following formula to return either a "PAST DUE" or "DUE" value in a particular cell based on the date entered in the cell in the previous column.
=IF(AND(TODAY()>=BG43+5,TODAY()=BG43+10,"PAST DUE",""))
However, if the reference cell is blank the formula automatically triggers to put in "PAST DUE" as the value. I would like to modify this formula so if the reference cell is blank that this cell will also remain blank. I've tried a few different options, but I'm getting an "too many arguments" error on what I've tried.
View 3 Replies
View Related
Oct 2, 2007
I have a range that is filled with formulae and the the number of rows in the range with data changes as the formulae reevaluate the inputs. So the rows with visible data changes between one row and 200 rows. By looking at the output in the first column of the range, Col M and finding the last row where the formulae returns data, I need a way of selecting across the columns of the range (M1 through to Qi) where i is the number of rows that have data in.
View 8 Replies
View Related
Aug 30, 2007
I have a summary worksheet consisting of columns that are referenced to other sheets within the same workbook.
If the cell in the 'referring' (original) sheet is blank then the forumula returns a zero instead of a blank in my summary worksheet, which is messing up some other calculations.
Is there a way to make these cells truly blank, or possibly into string variables instead, so that they do not interfere with my calculations?
View 13 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Mar 3, 2014
The below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
View 6 Replies
View Related
Jul 15, 2008
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
View 14 Replies
View Related
Aug 12, 2014
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
View 5 Replies
View Related
Mar 12, 2014
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies
View Related
Mar 22, 2014
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
View 10 Replies
View Related
Feb 21, 2006
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
View 14 Replies
View Related
Feb 27, 2013
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
View 2 Replies
View Related
Mar 27, 2014
I am creating a tracking spreadsheet where i can toggle between months (attached). It returns data properly when I select January or February from the yellow highlighted dropdown list. However, when i choose March, it returns 1/0/1900 because no data has been entered for March (table array) on the AAAG tab. How do I write the formula to return a blank cell on the summary sheet when no information has been entered into the table array yet?
View 2 Replies
View Related
Nov 17, 2008
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
View 9 Replies
View Related
Jan 7, 2013
If the value of the adjacent cell in column A is blank, insert a blank row through Column B:J.
View 9 Replies
View Related
Apr 3, 2014
in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies
View Related
Aug 13, 2013
the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
View 6 Replies
View Related
May 24, 2014
I have a spreadsheet with data in 7 columns. Columns A-d have one line of data in them but the other 3 columns have more than one line.
How do I write a macro which will copy the first row of the first 4 columns down until I reach an empty row?
View 2 Replies
View Related
Feb 4, 2009
using a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies
View Related
Jun 15, 2007
I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
View 6 Replies
View Related
Jul 11, 2007
I have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
View 9 Replies
View Related
