My formula is returning a 0 when true instead of being blank as specified. If I designate a value other than "blank" (i.e. "A Word") it still returns a 0. What am I doing wrong?
=IF(AND(CBAuditType="PHYSICAL",TxtInsuredName=""),"",TxtInsuredName)
The formula below
=IF(M22<=286.74>191.16,(286.74-M22)*30%, IF(M22<=191.16>127.44,((191.16-M22)*50%)+28.674, IF(M22<=127.44>79.65,((127.44-M22)*70%)+60.534, IF(M22<=79.65,((79.65-M22)*90%)+93.987. is returning all data based on =IF(M22<=286.74>191.16,(286.74-M22)*30%, and is disregrading the rest of the formula.
The formula I am having issues with is:
=IF(L14="YES",IF(B14="","",NETWORKDAYS(B14,IF(AH14="",TODAY(),AH14),IF(L14="NO",NETWORKDAYS(B14,IF(V14="",TODAY(),V14))))))
I'm looking for formula to return a value based on the amount of networkdays between 2 dates.
Column L has a drop down for
"YES" and "NO"
If "YES" is selected then I need the formula to subtract AH from B (if B is blank I don't want the formula to return anything)
if AH has no date then I want it to use todays date.
If "NO" is selected then I need the formula to subtract V from B (again, if B is blank I don't want the formula to return anything)
if V has no date then I want it to use todays date.
The formula seems to work for everything as it is EXCEPT when L is "NO" it only return FALSE.
I am trying to return a text statement using nested IF statements. In order to find the value in the IF statements, I have to use lookups.
Example: ....
if Cell A1 is NOT blank then
If cell b1 is blank then show I in cell c1
If cell b1 has a date (any date) then show C in cell c1
If cell b1 says "ongoing" then show O in cell c1
If cell A1 IS blank then c1 should show nothing.
I want to create a nested IF formula that checks for blanks in three cells.
If A1=Not blank, then enter in "Live"
else
If B1=Not blank, then enter "Signed"
else
If C1=Not blank, then enter "Interested"
else
enter blank into cell
I have three named ranges that I need to do lookups for First I need the formula to do a look up at the HUMANALOOKUP range and then if a value is not found go to LABLOOKUP and then if not found go to CHCSLOOKUP and if not found return a blank. the column layout of each worksheet is the same so the column index number same throughout the formula.
View 2 Replies View RelatedTrying to create a formula, assume it will need to be a nested formula since I need to validate that cells are not blank and if so use a different cell .....
View 9 Replies View RelatedBelow formula matches two criteria
=SUMPRODUCT(('[Value.xlsx]test!$B$5:$B$50=$B5)*('[Value.xlsx]test'!$C$5:$C$50=$C5)*('[Value,xlsx]test'!D$5:D$50)).
What it does is:
Matching B5 value in range B5:B10 of tab "test" in worksheet "Value"
Matching C5 value in range C5:C10 of tab "test" in worksheet "Value"
AND capturing the matching value in range D5:D50.
The problem is that i am getting 0 if the matching value is a blank or 0.
I want the formula to return nothing (i.e. blank) when the matching value is blank and 0 only when the matching value is actually 0.
I have a nested if statement that doesn't give a blank cell when it is evaluated. The cell is general formatted but results in a '0' in the cell instead of a completely blank cell.
If statement is:
=IF('Sales info'!B16="",'Sales info'!B6,IF('Sales info'!B6="","",'Sales info'!B16))
Why is this giving me a 0?
I'm linking one sheet in a workbook to another. The formula is simple,
='Link 1'!E1
If there is data in the cell, it replicates it which is what I'm after. However if there is no data in the cell it returns a "0", not what I want at all.
I have a current formula using SUM formulas obviously in the answer cell the answer is returning 0 due to no data inputed, how do i make the cell show empty.
eg. =SUM(A1*A3) returns answer 0 need cell to be blank.
I am using the following formula to return an "F" in the cell. If there is no "F" it just returns "#N/A". Is it possible to have the cell blank instead of the #N/A? If so how do I do it?
=INDEX(E1:E99,MATCH(1,(A1:A99=Selections!J5)*(E1:E99="F"),0))
and then ctrl + shift + enter
I want to be able to return the value of the last non-blank cell in the horizontal range L3:BF3. This would need to account for any blank cells that might occur within the range. Those 'blank' cells would contain formulae and the non-blank cells would contain GCSE grades from A* down to U or National Curriculum levels in the format nx (e.g. 3a). I would need to be able to copy the formula down to other rows. The reason I'm not keen on an array formula is because they can slow things down, as I understand it.
I'm afraid I don't have a sample worksheet as this is all, for now at least, an emerging plan in my head. I should probably add that the grades will not necessarily increase in value in the range, so we're not looking for the largest.
If it can not locate the correct responce I want it the formula cell to be blank. How do I adjust my formula to do this?
This is the forumal I am currently using
=VLOOKUP(A26,Subs!A:F,5,0)
I have also tried this one as well
=IF(ISNA(VLOOKUP(A6,Subs!A:E,5,0))+(VLOOKUP(A6,Subs!A:E,5,0)=""),"",VLOOKUP(A6,Subs!A:E,5,0))
I am trying to get data in excel sheet using web query from the following web link:
But I the data returned is a 'hypen' (i.e. a dash symbol). I am getting the row/column headers but not the figures or the numbers under them.
Referenced cells returning zeros: can these be made blank or string data?
But why I still get the value 0 instead of blank cell when I press ctrl+shift+enter?
My formula = IF(U15="Bank", PROPER(E15),"")
and E15 = VLOOKUP(B15,'Customer Data'!$D$6:$K$100,3,FALSE)
I am trying to trigger a formula if a cell (B2) is populated (with anything) but if it is blank for the destination cell to remain blank.
The formula I am trying to trigger is =IF(G18=0,100,100-(100/(1+H18))).
I'm currently using the following formula to return either a "PAST DUE" or "DUE" value in a particular cell based on the date entered in the cell in the previous column.
=IF(AND(TODAY()>=BG43+5,TODAY()=BG43+10,"PAST DUE",""))
However, if the reference cell is blank the formula automatically triggers to put in "PAST DUE" as the value. I would like to modify this formula so if the reference cell is blank that this cell will also remain blank. I've tried a few different options, but I'm getting an "too many arguments" error on what I've tried.
I have a range that is filled with formulae and the the number of rows in the range with data changes as the formulae reevaluate the inputs. So the rows with visible data changes between one row and 200 rows. By looking at the output in the first column of the range, Col M and finding the last row where the formulae returns data, I need a way of selecting across the columns of the range (M1 through to Qi) where i is the number of rows that have data in.
View 8 Replies View RelatedI have a summary worksheet consisting of columns that are referenced to other sheets within the same workbook.
If the cell in the 'referring' (original) sheet is blank then the forumula returns a zero instead of a blank in my summary worksheet, which is messing up some other calculations.
Is there a way to make these cells truly blank, or possibly into string variables instead, so that they do not interfere with my calculations?
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedThe below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
My objective is to replace a text string with a numeric variable. The string has text values such as US, Canada, Germany, France etc, There are about 15 such words in total. Each row will have a different one of the 15 text strings.
Each text string has a corresponding number, which I want to use in various formulas throughout the spreadsheet. The numbers are located on a separate worksheet (“Match Rate”), within the same workbook. I obtained the numbers from a formatted report, which I simply pasted into the second worksheet. Due to the complexity of the report, I can’t reformat the numbers to allow use of the VLOOKUP function.
I created the following function, but unfortunately it doesn’t work. Can you help, please?
I’d like to stay with a VBA solution, since a simple if/then sequence such as this is an excellent introduction to the powerful world of VBA... (it just doesn’t work, yet). I suspect the problem is in the calls to the Match Rate Worksheet.