I need to do is move a list of data in an excel worksheet to Notepad. The data is 16 numbers long, but the Notepad needs to be left justified to 19 characters. I can't figure out a way to move spaces over to notepad.
View 6 RepliesI have multiple choices in a list box. I wish to know how do i link each choices in the list box to another worksheet so when clicked it goes to the worksheet specified.
View 3 Replies View RelatedI have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
How can I move data from one worksheet and place in another worksheet in the appropriate column? I exported data from Access to Excel in order but I need to group the data in excel.
View 3 Replies View RelatedI would like to move the current row of data to another sheet when I change a value in the row from an x to an s. I think I could use an If statement, but if you can move data from one worksheet to another, I don't know the syntax to use.
View 9 Replies View RelatedI need a code that will allow me to move data from a worksheet to a worksheet from which I came from. e.g. worksheet "Sheet 6" opens "Sheet 10", then after filling data in "Sheet 10" I need to move this data back to "Sheet 6" in the cells in range "F12 to F56". Please note that the data in "Sheet 10" is in the same range as in "Sheet 6"
View 1 Replies View RelatedI'm looking to automatically move data from my working worksheet, when a particular column states "Won" or "Lost". I'm hoping the entire row of data can be cut, and added to the appropriate sheet, determined by "Won" or "Lost".
View 5 Replies View RelatedError in the code, where I'm trying to copy the data (based on criteria) from one worksheet to another, then delete the data from the first worksheet. In the code (I have complied from this message board) I get an 1004 error "Application-defined or Object-defined error".
Code:
Option Explicit
Sub CopyALColKYes()
Dim NR As Long, c As Range, firstaddress As String
Application.ScreenUpdating = False
NR = Sheets("Completed-Expired").Cells(Rows.Count, 13).End(xlUp).Row + 1
[Code] .........
Is it possible to have a macro compare two wokrsheets and move the totals from one sheet to the other worksheet.
Here are the worksheets: ....
Trying to pull data from a list and if the cell above is empty then pull the data from the cell below and so on........
I have some code for it..but its just a little bit too long and I can't use it
This is what i have so far, trying to simplify it as its way to long to fit in a singel cell....i did think about breaking it down in to collums of either 8 or 6 and having it in chunks that way...but if i did that then i would still have to eventually use this forumla below as i don't really want huge gaps within the form i'm doing.
this are function which button needs to be able to do after clicking on it.
• When the value of only one of Description or Unit/Price is entered, a warning message appears.
• When the message is confirmed, return to the entry status for the new data.
• When the values of both Description and Unit/Price are entered, save the values in the list of product (worksheet Product), and increase Product No. by 1 and erase values from NewProduct worksheet this is the screen how it should look but button which should be able to do all the thing above at once is called List Entry
[url]
after creating this function all the values from the table product need to be update into another table which sould look like that:
[url]
Is there anyone how could write code which will do thing above?
in the attachemnt is the excel file which shows what I have done so far, as i am not a good programmer,so I do not know if it's right
I am trying to find a macro that will filter on Column F (non-blanks - just cells with dates) cut just the filtered data (A:G inclusive)without the Header Rows and then paste/move this data to the first empty row on another sheet called "Complete"
So that I get the cells in columns A:G with dates in moved to the "Complete" tab and they are no longer in the sheet "Deliverables"
I have a formula sheet that uses an IF statement to determine if one columns data is bigger than another. Out of the 300 or so rows there are approx 20 that come back as yes (this is in column A) and the rest are blank
What I would like to do, is for the 20 or so rows, I would like to pull out (copy) columns B, J and L and put them into worksheet 2. Preferably without any gaps in the rows or columns.
I hope this is enough information, I am using MS excel version 2010 although I think the people who will ultimately be using it are on an earlier version.
I have a excel file with two tabs, one with raw data, with data ordered by geographic region.
I have another blank tab, where I've created a dropdown list of the geographic regions.
How do I move all the data from worksheet to the other based on that geographic region?
situation: 3 rows of data, row 1 has HDR in several cells (always in A1).
task
1. search row one for next example of cell containing HDR, excluding cell A1.
2. IF found, create a new worksheet and move all data below and/or to the right of that cell to the new sheet.
3. Repeat steps two and three until the search does not turn up another HDR except in A1.
I am trying to copy data from an excel sheet and I want to paste it into note pad and save it on c drive. Is there a way to write a macro to do that task? Basically copy the data from excel, then open notepad and paste it there, save the notepad in txt extension on the hard drive.
View 11 Replies View Relatedneed vb code for copying some set of cells to notepad file with some file name
View 9 Replies View RelatedI have problems copying data (from notepad, values are in scientific notation) into Excel 2010 worksheet. This problem only occurs with one of my laptops. I also tried this on my partner's laptop and no problem at all.
My new laptop (which I would like to use in the lab) has Windows 7 professional installed on it. I bought my laptop in Austria/Germany, so I changed the language from German to English. I then installed Microsoft Office 2010 on my laptop (which I am also using on my main laptop- without any issues). I have changed my default language to English UK.
The issue is as follows: Here is a small sample of the data from notepad
3.33343e-03 1.51357e-03 0.00000e+00 0.00000e+00 4.96507e-01 3.84643e-03 6.24332e+00 1.81305e+03
I select & copy the data from the notepad (also tried notepad++) and paste it into the Excel 2010 worksheet. This is what I get in Excel:
3.33E+02 1.51E+02 0.00E+00 0.00E+00 4.97E+04 3.85E+02 6.24E+05 1.81E+08
When I use another spreadsheet package (MagicPlot Student version), there are no problems. I have also installed Notepad++ and experience the same issue. So somehow Excel is increasing the value by 5 orders of magnitude. When I copy the values from another Excel sheet into a new Excel sheet, there are no problems. I have re-installed the Microsoft Office suite several times and the problem is still there. I can't re-install Windows 7 as I don't have the installation discs.
I have a colmun of data that needs to be exported to notepad. I managed to make the routine works with the following codes:
[Code]....
However, there's some improvement that I need:
1) I want to refer my file name from here
[Code] .........
How to embed it?
One thing to note, when i ran the code, the txt file was saved as HS instead of KL AUTHS. I tried with different names and apparently it will capture maximum two characters.
2) Based on the code, it saves to my default saving location. I would like to save the txt file in the same directory as my excel file.
I'm having problem in copying the data from 2 notepad files into a single excelsheet, i have the below macro which creates two seperate excel sheets. i want to put the data from summary1 to tab1 and summary2 to Tab2....
View 9 Replies View RelatedIf my file is like so
A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
A3 B3 C3 D3 E3
i NEED THE OUTPUT IN NOTEPAD
A1B1 C1 D2 E1
A2 B2 C2 D3E2
The spacing varies from row to row
if i am saveing as notepad file....in macro how can i give the spacing properties give an example macro and i will customize it according to my need
I have Sheet1 "MASTER" and Sheet2 "Area1" and Sheet3 "Area2" etc...
My MASTER sheet has a list of employee names and the areas they work in. I have employees working in different areas, and I want to pull a list of employee names from the MASTER working in Area1 (sorted on the MASTER sheet) to column A on Sheet2, then pull a list of employee names working in Area2 to column A on Sheet3, etc...
I want it to do this in such a way that if I add an employee to Area1 on the MASTER data, it will populate that employee in the Area1 Sheet.
So basically, I'm looking at one column on the MASTER sheet to see if the area matches. Then looking at another column on the MASTER sheet to get the name. Then taking that name and transposing it to a new sheet corresponding to the area they work in.
I've attached a sample sheet. I want Column A in the Area1 sheet to reflect all names that show up on the Area1 LIST on the MASTER sheet, and nothing else. I'm using VLOOKUP to pull the rest of the data from the MASTER table.
There is a new sample workbook up now. Couldn't update it sooner due to site outage. I've removed irrelevant data to improve readability and focus on what I'm trying to achieve. Again, the main issue is scraping column E from the Master, and populating a list of all employees who match certain values in Column E on the Master in Column A of the other tabs.
I have the attached workbook that contains a list of produce in the Produce sheet and I am wanting to have the Availability sheet show what produce is available each day sorted into Good, Limited and None as per the data on the Produce sheet. I should end up with a list of each type of produce listed under the relevant availability each day.
Sorry but I have limited knowledge of VB, I assume that the best way to do this is some code behind the Availability worksheet but I am not able to determine what this code should look like.
I'm using data validation to create a drop down list ina spreadsheet so that users can select from a pre-defined list. I want to be able to maintain this list in a separate worksheet, but when I try to create the list it tells me that "You may not use references to other worksheets or workbooks for Data Validation Criteria". I don't want to maintain the list in the same worksheet as there's a risk of deletion. Is there a way to create a dropdown list in a second worksheet?
View 5 Replies View RelatedI'm trying to create a worksheet register. Insofar, with the help of this forum, I have been able to put together a code that creates a list of hyperlinks to all current worksheets
Sheets("Register").Select
Dim wks As Worksheet
Dim rngLinkCell As Range
Dim strSubAddress As String, strDisplayText As String
Worksheets("Register").Range("A3:A600").ClearContents
For Each wks In ActiveWorkbook.Worksheets
Set rngLinkCell = Worksheets("Register").Range("A600").End(xlUp)
If rngLinkCell <> "" Then Set rngLinkCell = rngLinkCell.Offset(1, 0)
strSubAddress = "'" & wks.Name & "'!A1"
strDisplayText = "" & wks.Name
Worksheets("Register").Hyperlinks.Add Anchor:=rngLinkCell, Address:="",
SubAddress:=strSubAddress, TextToDisplay:=strDisplayText
Next wks
In additon to this I would like an addition to the code to pick up data from a cell (G10) within all the worksheets and place it in Coloum B (starting from B3) of the register. And clear the coloum firstly to make way for any updates. I tried doing this myself by modifying a recorded macro but the data would just write to one cell over and over again
I have a grade book with 17 worksheets 1 for each subject = each of the sheets are identical with the students names in col B and the data is entered manually in the corresponding cols along side the names.
What I would like is a vba solution to enter the data in a worksheet called 'datainput' = which would be identical in layout as the above subject sheets= and by the use of a drop down list with the names of the 17 subject sheets = copy the data in the 'datatinput' worksheet into the next available blank col in the worksheet selected from the drop down list=and with a command button erase the data in the 'datainput' worksheet ready to enter new data.
I have a spreadsheet in Excel 2003 with many sheets all of which need to have for some columns the data entry restricted to a specific list.
To do this we have created lists defined and held in a separate sheet and then attempted to reference these from all the other sheets using Data -> Validation and then entering the relevant list in the Validation criteria.
The 1st sheet we set the Data Validation up in all is fine. The 2nd sheet however I get an error pop-up stating 'You may not use references to other worksheets or workbooks for Data Validation criteria'.
I am running into an odd issue and hope someone might be able to shed some light.
I have created several lists on one sheet in a workbook and have assigned named ranges to each individual list. So far, so good.
On various other worksheets, I have created Data Validation rules to allow users to select the relevant data from drop-down lists. (using formulas such as =List1, =List2, etc. in the Source box to capture the named ranges I had created).
Everything works perfectly...EXCEPT for one worksheet, which continues to give me the error message, "You may not use references to other worksheets or workbooks for Data Validation criteria." Can anyone explain why this error would only occur on one worksheet and work fine for all the other sheets? I'm perplexed!
I have two worksheets 1) PL dbase and 2) Waiting list. Both setup as Lists. Where Excel automatically inserts a new row as you click in the current rows...
I want to autofilter Waiting list column I for the value of "Yes"
Copy all the data autofiltered in Waiting list to the next available row(s) on worksheet PL dbase.
I am desperately in need of a macro that will count the number of items in column A of each worksheet and then summarize the results next to the names of the worksheets (i.e. in two adjacent columns) on Sheet 1 of the book. Obviously, Sheet 1 needs to be ignored by the macro.
View 3 Replies View Related