I have some code that unhides the next worksheet when the value 'next' is selected at the bottom of the sheet being completed.
I would like to add some code so that the new sheet is opened and the curser is placed in the first cell that needs to be completed (E5).
I want a macro which will move cursor to right cell of the same row when the user will press enter in a particular sheet of particular workbook. I have tried the ToolsoptionsEditmove selection after enter , but this applies to excel as a whole and needs to be change every time if another worksheet or workbook is used and thus creating difficulty.
Can this be done through a macro as I need the cursor to move to right cell only for a particular worksheet and for a particular workbook?
I work with a sheet with active columns B thru I, which get daily numeric entries. The problem is that I have to enter data in columns H & I first, then go back to B thru G. how to force the cursor to jump to column B when I tab out of I into J?
View 5 Replies View Relatedexist any function that do following?
I am on the row 100 in column G. I had a freeze the first row where i have hypertext and other function. I want add here (in the 1. row) something like hypertext, but i want to stay in the row where i was.
When i am on row 100 in column G and i want to create function which move my cursor to column W but in the same row (row 100 in this case).
Next time i will be in row 154 and i will want to move my cursor again in column W and use this same hypertext/function or what.
how I can move the cursor position on all visible worksheets to A1 before a workbook is saved.
View 9 Replies View Relatedthe code to get my cursor to move down 1 row or cell without it actually referencing the chosen cell.
Is there a code to make the Cursor Movement direction to be set to move Left ?
View 2 Replies View RelatedI am trying to position the cursor in a spreadsheet column based on the data within the column but am struggling with the software to do it.
What I have is:
(a) A column (A:A) containing a mix of up to 500 numbers (1 to 3 digit) and a few text entries (1 to 6 char). These form the basis of a movement log where say 100 different drivers (each with unique identity) are logged in and out, so there will be duplicates.
(b) A number of other columns logging task/times etc but the one I am interested in (B:B), contains a tick (martlet font "a") to denote the driver has departed.
What I want to do when a driver departs, is have a quick way of finding (from the top down) the row containing the drivers number (A:A) where the driver logged in, but has not yet departed (so I can tick him out!).
So from the top: find the first row (in A:A) matching a specific number/string, where B:B is also blank and position the cursor at B"x").
I have imagined a "button" with data entry at the top of the sheet being the easiest physical way of doing it but am open to offers.
Can the Cursor (or cell?) be highlighted as well, because this is not always easy to see in bright light.
I want play a trick on someone and make a button move out of the way when they try to click on it. I think that this code is from VB6.0:
Private Sub CommandButton1_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
CommandButton1.Move Rnd(100) * 4000, Rnd(100) * 4000, 1000, 1000
End Sub
In Excel, this code results in Run-time error '438': "Object doesn't support this property or method."
Is there a way to "move" a button in Excel VBA?
I have written code for a userform, and after I enter in valid data, the cursor will not move on to then next field. I cannot even click on another field with my mouse. I changed some of the code around to add validation to it, and now I am unable to move on once a valid entry has been made. If the user enters in the value "9999" the userform works just fine, it only freezes when they attempt to enter in an employee number. I've tried a few different ways to resolve this, but nothing is working. This is the code I have written.
[Code] .....
Doing a search function where the cursor is on a row some where (unknown).
I would like to move the cursor to the first column of the spreadsheet.
Is there a way to make it so when i hit enter my cursor moves 7 cells instead of 1?
View 9 Replies View Relatedto make cursor to move only on the selected cells.
E7, O21, O22, O23, O24, Z23, Z24, Z26, Z27, Z28, C26, C27, C28 ...
how can i define, in vba that after click on button in sheet1, it looks at value in cell B1 in this sheet and move my cursor exactly on this value in sheet2 where i have data in range (B4:C6000).
View 2 Replies View RelatedCan I make the cursor use only 2 columns? In other words, I know that when I scan barcode data into A1, I have the cursor automatically move to B1. BUT, once I've scanned data into B1, how do I make the cursor automatically move to A2?
View 2 Replies View RelatedDoes anyone know the equivalent of CTRL (Home) to move the cursor to the a1 position in VBA? I have tried Range(cells(1,1),cells(1,1)).select but with no success
View 3 Replies View RelatedI would like to move the current row of data to another sheet when I change a value in the row from an x to an s. I think I could use an If statement, but if you can move data from one worksheet to another, I don't know the syntax to use.
View 9 Replies View RelatedOne of the worksheets contains all of the data and the rest are empty. I need to do is move entire rows of from the main worksheet in to worksheets named the same as the value in column C of the row.
for example one row may have TEST in column C so i want to move it to the worksheet called TEST. The next row might have TESTING in column C so that would go to the worksheet called TESTING. and so on.
I currently have a consolidated worksheet (thanks Bill!) called " Dashboard" that contains closed items that are marked by a validated column that can only contain "Closed, Open, or In-Progress." Is there a way to move the rows with a value of "Closed" to another worksheet called "Completed"? Also when this move is done, that row is no longer necessary in Dashboard and should be removed. So I'm guessing its a lot like a cut and paste and then a delete row/shift cells up?
here are some additional information:
The worksheet has a locked header that is 6 rows deep (the values for the "Status" column begins on row 7 and on.)
The "status" column is at column 11.
I have a excel file to keep track of tasks or actions that need to be performed. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows (so an entire task) of completed tasks to another sheet called, "Completed Actions". In Actions sheet I have a column for " status" and here you have to select from a drop down menu, either "On-going", "Urgent" or "Done". What I would like, is that once you have selected "Done", the entire row or entry, will be automatically moved to the "Completed Actions" sheet.
View 7 Replies View Relatedsituation: 3 rows of data, row 1 has HDR in several cells (always in A1).
task
1. search row one for next example of cell containing HDR, excluding cell A1.
2. IF found, create a new worksheet and move all data below and/or to the right of that cell to the new sheet.
3. Repeat steps two and three until the search does not turn up another HDR except in A1.
I am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
View 2 Replies View RelatedI know you can see it but If set to default when the mouse moves over an object it changes to that object's cursor. Access had a screen property that may have detected this change. Excel Examples On the worksheet the cursor is a cross If on a worksheet you have a shape with a macro the pointer changes to a hand On a shape without a macro the pointer is 6
HOW do you use vba excel to find its current number or send a message when it changes or peek message to notify when it changes
I have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
Usually when I select a number of cells with my cursor excel adds up the cells and shows a total on the bar. It's stopped doing this now and will only show the 1st cell showing "max=No"
View 3 Replies View RelatedI was able to input barcode reader data into A1, and automatically get the date inserted into B1. I wish the next activecell to be C1, instead of A2 as the above code is doing at the moment - so how do I alter the code above to make this happen?
View 3 Replies View RelatedI would like to change A1 cell's Interior.ColorIndex to red color and A1's font format to Italic, while mouse cursor on top of A1 cell.
Can i do it with a VBA code or any different way to do it?
For example:
Sub CursorOnA1()
If MouseCursor OnTopOf [A1] Then
With [A1]
.Interior.ColorIndex = 3
.Font.Italic = True
End If
End If
End Sub
I want to do a arrangement for a file like this " wherever cursor moves in excel that particular cell will highlight with color and once it goes to some other cell that last highlighted cell will come as a ordinary cell"
View 5 Replies View RelatedI want to be able to enter a single digit figure into a cell and have the cursor move automatically to the next cell to the right. then enter a figure in there and have it do the same thing. is this possible and, if so, how?
View 2 Replies View RelatedIs there a way to make the text cursor appear at the start, as opposed to at the end, of a cell when pressing F2 to edit it?
View 3 Replies View Related
