I have a row stored in the variable Found_Row3 and I want to set the variable ACRow to all colomns from A to Z of that row. Below is what I have so far...not working
[Code] .....
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
Based on if the value in col A contains the characters "TT" I want to select the range starting with this cell and ending at the end at the end of the row I'm using (.End(xlRight) and then merge these cells, change colors etc. And then looping this through a 'range' so that it only occurs where the values occur. I can amend various cells based on this idea, but am unable to identify the range and then merge the cells.
View 2 Replies View RelatedI RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE()
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _
"Table1"
Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5"
End Sub
Basically I need a bit of VB to find the last cell in column F with text in it (is it End(xlUp)??) and then apply full borders from that cell up to cell Q5. A test macro tells me the border bit is as follows, so just need defining the range.
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.ColorIndex = 0
.TintAndShade = 0
[Code] ......
I know how to do Range("A" & I).Select, but how about if I want columns A thru E instead?
View 7 Replies View RelatedI am doing is setting a variable called eof to the number of rows (with text) and i just want to select columns A1 - G1 and the eof range!
Dim eof As Integer
With Sheets("Coverage Count (%)")
eof = .Range("G65536").End(xlUp).Row
'crashes on the .select
.Range("A1:G1" & eof).Select
Selection.Sort Key1:=Range("G2"), Order1:=xlDescending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End With
I've done this before and I could have sworn this worked...but i must be missing something.
This one should be easy but I keep running into the same wall.
On every page I have single cell defined name range based on the sheet name & "_startcell"
So on sheet MfgReq I have cell A3 defined as name range "MfgReq_startcell".
I would like to the following:
.clearcontent using the "MfgReq_startcell" as the upper most left cell, all the columns to the right, and all the rows down.
on this sheet it might be 5 columns wide by 4000 row & on another sheet it might be 50 columns wide by 50000 rows.
I am trying to create a command button on my userform that will allow me to print all the records in the worksheet....in other words it should only print the rows with data......
*my worksheet is called "complaintData" - this is hidden and not active sheet.
*I have columns A to J with information, with heading from A1:J1.
*I want to be able to print all the rows with values in column A. (Not all the columns except "A", will have values for every record....some may be blank for some records...
*I want all the columns to fit in in one page with headings (A1:J1) being first row on every new page.....
*page setup should be landscape...
I have tried a few codes from this forum, but not sure where I have goofed up....am still trying learn VBA.....would appreciate if anyone can fix this code for me....cheers
Private Sub cmdPrint_Click()
Sheets("ComplaintData").Visible = False
Dim ws As Worksheet
Set ws = Worksheets("complaintdata")
I have tried various syntaxes but nothing is working for me. I am using XL 2000 so it doesn't have the relative address function in the macro! So here is what I have
ActiveCell.Range("A1").Select
ActiveCell.R1C1
Range("R1C1:R1C85").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues
Application. ScreenUpdating = True
Range("A1").Select
I need to be able to select from the originating cell which will always be in "T" Col thru to "CZ" col but will be on different rows.
I download some data from a commercial real estate site about properties and their owners and process it in Excel. Out of 1,000 records, maybe 20 or so will have the data end up in the wrong fields. This is an artifact of the data source the commercial site uses.
Anyway, what I need to do is to get the data back in the right fields. So, I sort the data to pull together at the top of the sheet all the records with data where it's not supposed to be. So far, so good.
Now from one data download to another the number of records which end up in the sort will be different. And, here's the problem.
I try to record a macro mimicking my selection of the range of the data that needs to be moved. Fine, no problem. And, on the same dataset it works like a charm. But as soon as I put a different dataset into the spreadsheet with a different number of records that need to be corrected the macro fails.
Apparently, this is because the macro has been defined with a certain range of cells selected in the first data set and this same range is used for subsequent datasets with different numbers of errant records.
Basically, what I'm trying to record in a macro is the Shift/Control End and Shift/control arrow commands. But they don't record as such.
I need to select data from columns A, B and I for the graph. I have the below code but get an error message. Can anybody help ?
Set cellGR1 = Cells(2, 1)
Set cellGR2 = Cells(K, 2)
Set cellGR3 = Cells(2, 10)
Set cellGR4 = Cells(K, 10)
Charts.Add ....
I want to select and clear a part of a sheet.
here is what I have.
Sub clear_data()
sheets("sheet1").select
lr = activesheet.usedrange.rows.count
Here is where I get lost in translation (syntax).
I want to select starting at Bcolumn through bycolumn but the row be set with the LR from above, since the rows always change.
I could write B2:by2000, but i want to use the LR variable to define the number of rows i have.
I want to select the variable range somewhere in the middle of the sheet from where the 2nd instance of cell named "real cost" is, down to the next blank row (select the area without the blank row), so that I could copy it to another sheet.....
View 6 Replies View RelatedI want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI want the select case list of a ComboBox to be treated as a variable in order to shorten the code size. To clarify the problem, i post the code with what i want to do, but don't know how to do it that way.
Code:
Select Case ComboBox1.ListIndex
Case 0: y = "AT"
For j = 0 To 26
Case "j": y = sheets("name").Range("A(j)") 'Range A(j) is a string, so y as well, as seen in Case 0.
Next j
End Select
Is something like this possible?
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
On my userform I have 20 comment icons (imported pictures), that when clicked need to bring up an InputBox for the user to add a comment, and store that comment in a Public variable specific to that comment which will later be written to the spreadsheet.
To keep it simple, lets say I have two comment icons to click, one to add comments to the "Testing Completed?" field, and one to add to the "Sign-Off?" field.
The first comment icon is named TestCompIcon, the second is SignOffIcon, and the public variables they write to are called TestCompComment and SignOffComment respectively.
To avoid having to code the InputBox procedure for every comment icon on the userform, I was hoping that upon click, the icon would call a centralized routine that would establish the name of the variable that needs to be written based on the name of the icon comment that was clicked. Something like as follows:...............
The code below is part of a larger script which I'm having difficulties in amending.
[Code]....
In it's current form, this row.
selects cell C7 and expands the range until the cell is blank.
I'd now like to amend this so that I can select the first cell in the range within an offset rather than C7
I can set the offset within the script as below, but I'm a little unsure how to select the first cell in the range.
I need a code to select the last cell which is having value in the range of A1:a200. if I use below, it is selecting cell beyond a200.
lr = Sheets(1).Range("A" & Rows.Count).End(xlUp).Row
how to select a cell in opposite (i.e right side of a range) while using a macro. My macro selects a certain range based on user input. The active cell is the left most upper cell. I need to move the active cell within the range to the right upper most cell. I tried the short cut key - tab, while recording a macro, but the macro just selcted a that certain cell.
View 4 Replies View RelatedI am using 2010 and want to select a range starting at the same cell all of the time (regardless of whether or not it has contents - so let's say B7. Starting at B7, I want the range to include all of the columns starting at B and go to the end of all of the columns. Then I want the range to include all of the rows starting at B7 and end at the last row. I will eventually copy this range and paste it on another worksheet start on a specific cell of another worksheet. (Perhaps, we can add a name to this range).
View 2 Replies View RelatedI'm looking for formula or a method how could calculate a product of range of cells when I have only the first cell, but I need to multiply 260 cells that are in front of it.
I now find a cell using index with double match criteria and use "Cell(info_type, Ref)" to determine the cell where the first value is. I need to take that value and multiply it with with t+1, t+2, etc. to get the final number.
In the attached file, i want to select the range from cell B8 (which is fixed), to used range i.e. till Cell F18 (but the problem is, cell F18 is not fixed). Last used row or column can change. I want to do it by using VBA.
Here is the sample file Select Range.xlsm
I have a worksheet with a block of data. The size of this block changes.
I am calculating and storing the upperleft and lower right cell position of the block in say cells AA3 and AB3 on the same worksheet.
So far I have everything working fine.
Now I want to create a button to trigger a macro to sort that block.
I can figure out the button and make it trigger a macro.
One of the lines in the macro is
I am trying to select range of unlocked cells and clear it's contents? How can i do that?
Right now I have a code to select ALL cells.
I have a piece of code that changes the format of a cell using an intersect statement on the range in question. However, if I try and select more than one cell in the range then an error message is returned: 'Run Time Error 13': Type mismatch. I know that it is caused by selectin multiple cells - is there a way to error handle this so that, when multiple cells are selected, it ignores the intersect statement?
View 2 Replies View Relatedi need a code that will find the first empty cell in column "H" then select go down a row and select upto column "R" so in example range ("H2:R3") would get selected.
I am lost this is all i have so far and it doesn't work
Code:
Worksheets(newname).Range("H" & Rows.Count.End(xlUp).Offset(1) & ":" & "R" & Rows.Count.End(xlUp).Offset(2)).Select
How do I select the next empty cell in a range?
Say I have myrange=Range("B32:B37"), then I want to put values into the next empty cell in that range.
I want to check if I have a value in B32, and if I have, I want excel to go to B33 and print a string there and the same for 34.
Is it possible, through VBA, to select the top right cell in a non-contiguous range? For example, I have defined A1, A3, and A5 as a range. How could I tell Excel to select A5 from within that range?
I am using Excel 2007.