I need to select data from columns A, B and I for the graph. I have the below code but get an error message. Can anybody help ?
Set cellGR1 = Cells(2, 1)
Set cellGR2 = Cells(K, 2)
Set cellGR3 = Cells(2, 10)
Set cellGR4 = Cells(K, 10)
Charts.Add ....
I have a vast database where I have linked charts. I send the data from a macro to the database and sometimes there are 1000 inputs and sometimes there are only 20.
How would i set up my charts to only graph the inputs that are present?
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
Basically I need a bit of VB to find the last cell in column F with text in it (is it End(xlUp)??) and then apply full borders from that cell up to cell Q5. A test macro tells me the border bit is as follows, so just need defining the range.
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.ColorIndex = 0
.TintAndShade = 0
[Code] ......
I know how to do Range("A" & I).Select, but how about if I want columns A thru E instead?
View 7 Replies View RelatedI am doing is setting a variable called eof to the number of rows (with text) and i just want to select columns A1 - G1 and the eof range!
Dim eof As Integer
With Sheets("Coverage Count (%)")
eof = .Range("G65536").End(xlUp).Row
'crashes on the .select
.Range("A1:G1" & eof).Select
Selection.Sort Key1:=Range("G2"), Order1:=xlDescending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End With
I've done this before and I could have sworn this worked...but i must be missing something.
This one should be easy but I keep running into the same wall.
On every page I have single cell defined name range based on the sheet name & "_startcell"
So on sheet MfgReq I have cell A3 defined as name range "MfgReq_startcell".
I would like to the following:
.clearcontent using the "MfgReq_startcell" as the upper most left cell, all the columns to the right, and all the rows down.
on this sheet it might be 5 columns wide by 4000 row & on another sheet it might be 50 columns wide by 50000 rows.
I am trying to create a command button on my userform that will allow me to print all the records in the worksheet....in other words it should only print the rows with data......
*my worksheet is called "complaintData" - this is hidden and not active sheet.
*I have columns A to J with information, with heading from A1:J1.
*I want to be able to print all the rows with values in column A. (Not all the columns except "A", will have values for every record....some may be blank for some records...
*I want all the columns to fit in in one page with headings (A1:J1) being first row on every new page.....
*page setup should be landscape...
I have tried a few codes from this forum, but not sure where I have goofed up....am still trying learn VBA.....would appreciate if anyone can fix this code for me....cheers
Private Sub cmdPrint_Click()
Sheets("ComplaintData").Visible = False
Dim ws As Worksheet
Set ws = Worksheets("complaintdata")
I have tried various syntaxes but nothing is working for me. I am using XL 2000 so it doesn't have the relative address function in the macro! So here is what I have
ActiveCell.Range("A1").Select
ActiveCell.R1C1
Range("R1C1:R1C85").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues
Application. ScreenUpdating = True
Range("A1").Select
I need to be able to select from the originating cell which will always be in "T" Col thru to "CZ" col but will be on different rows.
I have a row stored in the variable Found_Row3 and I want to set the variable ACRow to all colomns from A to Z of that row. Below is what I have so far...not working
[Code] .....
I download some data from a commercial real estate site about properties and their owners and process it in Excel. Out of 1,000 records, maybe 20 or so will have the data end up in the wrong fields. This is an artifact of the data source the commercial site uses.
Anyway, what I need to do is to get the data back in the right fields. So, I sort the data to pull together at the top of the sheet all the records with data where it's not supposed to be. So far, so good.
Now from one data download to another the number of records which end up in the sort will be different. And, here's the problem.
I try to record a macro mimicking my selection of the range of the data that needs to be moved. Fine, no problem. And, on the same dataset it works like a charm. But as soon as I put a different dataset into the spreadsheet with a different number of records that need to be corrected the macro fails.
Apparently, this is because the macro has been defined with a certain range of cells selected in the first data set and this same range is used for subsequent datasets with different numbers of errant records.
Basically, what I'm trying to record in a macro is the Shift/Control End and Shift/control arrow commands. But they don't record as such.
I want to select and clear a part of a sheet.
here is what I have.
Sub clear_data()
sheets("sheet1").select
lr = activesheet.usedrange.rows.count
Here is where I get lost in translation (syntax).
I want to select starting at Bcolumn through bycolumn but the row be set with the LR from above, since the rows always change.
I could write B2:by2000, but i want to use the LR variable to define the number of rows i have.
Based on if the value in col A contains the characters "TT" I want to select the range starting with this cell and ending at the end at the end of the row I'm using (.End(xlRight) and then merge these cells, change colors etc. And then looping this through a 'range' so that it only occurs where the values occur. I can amend various cells based on this idea, but am unable to identify the range and then merge the cells.
View 2 Replies View RelatedI want to select the variable range somewhere in the middle of the sheet from where the 2nd instance of cell named "real cost" is, down to the next blank row (select the area without the blank row), so that I could copy it to another sheet.....
View 6 Replies View RelatedI RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE()
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _
"Table1"
Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5"
End Sub
Is it possible to plot an xy scatter graph of "Result A" versus "Result B", and have the data points labelled with the values under "Mix" ?
Mix Result AResult B
1340.543 0.520
1360.562 0.525
1380.570 0.526
1400.561 0.528
1410.559 0.526
1420.568 0.526
1440.570 0.526
1460.578 0.526
1470.579 0.530
1480.575 0.529
I have a report that has rolling week by week data (as in YTD). The graphs I have are based on a 13 week period. As I add a week (done by VBA import) I want to update graphs to lastest 13 weeks as in last 13 columns of data on data sheet.
View 4 Replies View RelatedI want the select case list of a ComboBox to be treated as a variable in order to shorten the code size. To clarify the problem, i post the code with what i want to do, but don't know how to do it that way.
Code:
Select Case ComboBox1.ListIndex
Case 0: y = "AT"
For j = 0 To 26
Case "j": y = sheets("name").Range("A(j)") 'Range A(j) is a string, so y as well, as seen in Case 0.
Next j
End Select
Is something like this possible?
I want to carry out a survey in Sept, Oct and Nov. I will asking 1000 random people in each survey what is their personal favourite--- iPhone, Nexus or Blackberry. Counts of each phone type is then divided into male and female.
Now we have three variables: gender, phone type and month. Is there any way I can present 3 variables on X, Y & Z axes and the value at their intersection as bubble size (or colour gradient)? Theoretically it's possible but I can't find a way to do it in excel. Or anyone knows any software that can get the job done?
I currently have a spreadsheet with about 30 graphs, and when I am done there is going to be about double that.
I want to make one sheet, with a combo box that allows me to select which graph to display, so that users don't have to cycle through a large number of tabs.
I have seen this done before, but can't figure out how to do it. The extent of what I know is making a combo box and selecting the data range for the options to select in the combo box.
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
On my userform I have 20 comment icons (imported pictures), that when clicked need to bring up an InputBox for the user to add a comment, and store that comment in a Public variable specific to that comment which will later be written to the spreadsheet.
To keep it simple, lets say I have two comment icons to click, one to add comments to the "Testing Completed?" field, and one to add to the "Sign-Off?" field.
The first comment icon is named TestCompIcon, the second is SignOffIcon, and the public variables they write to are called TestCompComment and SignOffComment respectively.
To avoid having to code the InputBox procedure for every comment icon on the userform, I was hoping that upon click, the icon would call a centralized routine that would establish the name of the variable that needs to be written based on the name of the icon comment that was clicked. Something like as follows:...............
I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies View Relatedconcatenating a variable range of data. Attached are examples of what I have and what the desired outcome is.
View 2 Replies View RelatedI have a recorded macro to sort Data with 3 sort fields but has a Fixed range. The Data will increase each week so I need to modify to account for growth.
View 2 Replies View Related
I am attempting to set a variable as a range of data that sits on a non-activated worksheet. However, I am getting a runtime error of 13 (data mismatch).
Is there something in my code that may be incorrect? Here is my code:
Dim rRange As Range
Dim sRange As String
Dim tblName As String
[Code]......
I wish to collect an arbitary range of data in a column. Hence I wish to identify were the data begins (for example C10) and where the data ends (for example C22), and then copy it and paste it at another sheet. How to do that with VBA-code?
View 9 Replies View RelatedI want to be able to select and edit a range of data on a userform. I am trying to pull the information that matches a cell range (Named as Action) into the respective textboxes. But I have fallen at the first hurdle and can't even get that working.
View 2 Replies View RelatedI have data which is imported from a txt file and always starts at the same row (R19) but is variable in length (end of data R??). I want to be able to select the chart xvalues (R19C10:R?C10) and values (R19C4:R?C4) based on the number of cells with data in them for a given column. In addition I believe I'm having troubles with sheet references, when the txt file is opened the sheet name is set to the file name, since I want to use this macro on many different files I need the sheet referencing code to account for this. Anyway here is the section of code which seems to be giving me trouble (the initial sections just create a new column of data which needs to be referenced as the xvalues) ...
View 3 Replies View RelatedHow do you select specific coloured cells from a range of data in one go, without having to scroll through the worksheet and pick them out individually?
