The code below is part of a larger script which I'm having difficulties in amending.
[Code]....
In it's current form, this row.
selects cell C7 and expands the range until the cell is blank.
I'd now like to amend this so that I can select the first cell in the range within an offset rather than C7
I can set the offset within the script as below, but I'm a little unsure how to select the first cell in the range.
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
I need a code to select the last cell which is having value in the range of A1:a200. if I use below, it is selecting cell beyond a200.
lr = Sheets(1).Range("A" & Rows.Count).End(xlUp).Row
how to select a cell in opposite (i.e right side of a range) while using a macro. My macro selects a certain range based on user input. The active cell is the left most upper cell. I need to move the active cell within the range to the right upper most cell. I tried the short cut key - tab, while recording a macro, but the macro just selcted a that certain cell.
View 4 Replies View RelatedI am using 2010 and want to select a range starting at the same cell all of the time (regardless of whether or not it has contents - so let's say B7. Starting at B7, I want the range to include all of the columns starting at B and go to the end of all of the columns. Then I want the range to include all of the rows starting at B7 and end at the last row. I will eventually copy this range and paste it on another worksheet start on a specific cell of another worksheet. (Perhaps, we can add a name to this range).
View 2 Replies View RelatedI'm looking for formula or a method how could calculate a product of range of cells when I have only the first cell, but I need to multiply 260 cells that are in front of it.
I now find a cell using index with double match criteria and use "Cell(info_type, Ref)" to determine the cell where the first value is. I need to take that value and multiply it with with t+1, t+2, etc. to get the final number.
In the attached file, i want to select the range from cell B8 (which is fixed), to used range i.e. till Cell F18 (but the problem is, cell F18 is not fixed). Last used row or column can change. I want to do it by using VBA.
Here is the sample file Select Range.xlsm
I have a worksheet with a block of data. The size of this block changes.
I am calculating and storing the upperleft and lower right cell position of the block in say cells AA3 and AB3 on the same worksheet.
So far I have everything working fine.
Now I want to create a button to trigger a macro to sort that block.
I can figure out the button and make it trigger a macro.
One of the lines in the macro is
I am trying to select range of unlocked cells and clear it's contents? How can i do that?
Right now I have a code to select ALL cells.
I have a piece of code that changes the format of a cell using an intersect statement on the range in question. However, if I try and select more than one cell in the range then an error message is returned: 'Run Time Error 13': Type mismatch. I know that it is caused by selectin multiple cells - is there a way to error handle this so that, when multiple cells are selected, it ignores the intersect statement?
View 2 Replies View Relatedi need a code that will find the first empty cell in column "H" then select go down a row and select upto column "R" so in example range ("H2:R3") would get selected.
I am lost this is all i have so far and it doesn't work
Code:
Worksheets(newname).Range("H" & Rows.Count.End(xlUp).Offset(1) & ":" & "R" & Rows.Count.End(xlUp).Offset(2)).Select
How do I select the next empty cell in a range?
Say I have myrange=Range("B32:B37"), then I want to put values into the next empty cell in that range.
I want to check if I have a value in B32, and if I have, I want excel to go to B33 and print a string there and the same for 34.
Is it possible, through VBA, to select the top right cell in a non-contiguous range? For example, I have defined A1, A3, and A5 as a range. How could I tell Excel to select A5 from within that range?
I am using Excel 2007.
What is the best way to select every third cell in column c starting with cell C5
View 3 Replies View RelatedI have a row stored in the variable Found_Row3 and I want to set the variable ACRow to all colomns from A to Z of that row. Below is what I have so far...not working
[Code] .....
I want my code to evaluate each cell in column B, and based on its value, copy the row from D to X and paste on the newly activated worksheet. I'm trying to use Offset, but it's not working.
View 6 Replies View RelatedI’d like to copy a range of cells: (A1 – A4) and paste them into Cell A5, but here’s the rub: I would like the values after I paste them to be separated by commas.
View 9 Replies View RelatedI have a column with rows from 41:254, the first cell contains a word, and the next is blank, and this repeats the whole way down.
a previous macro i run changes one of the cells in the range (one of the ones containing a word) to a number value, i want to write a further macro to select this cell that has now changed. when it changes it will be the only cell in the range with a number in.
Based on if the value in col A contains the characters "TT" I want to select the range starting with this cell and ending at the end at the end of the row I'm using (.End(xlRight) and then merge these cells, change colors etc. And then looping this through a 'range' so that it only occurs where the values occur. I can amend various cells based on this idea, but am unable to identify the range and then merge the cells.
View 2 Replies View RelatedI'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result.
For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z).
The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
I would like to select cell A6 after pasting a large range so that when send to user the entire range is not selected. I tried
wsDestPage.Range("A6").Select
And
wsDestPage.[a6].Select
I receive
Select method of range class failed
How can I select a single cell after pasting the large range?
I need to change multiple conditional formats which apply to cell ranges 1 row x 17 columns wide. The specific change I am making is able to be acrried out with the code
With Selection.FormatConditions(1).Font
.ColorIndex = xlAutomatic
End With
However, I dont want the user to have to manually select each 17 cell area. I WANT THE USER TO JUST MANUALLY SELECT THE FIRST OF THE 17 CELL AREA. I want to write a macro that will THEN select a row of cells, 17 cells long, from the MANUALLY SELECTED position as at the moment of running the macro. Unfortunately the cells are not always on the same row in each sheet. On one sheet they may be on row 5, on another row 8 and on another, row 15 etc. I was wanting to be able to select a 17 cell range 'relative' to where the cursor is. How do I write the code to select the relative cell range? Is there an answer in an R[1]C[1]:R[1]C[17] sort of code?
I RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE()
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _
"Table1"
Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5"
End Sub
I am trying to write the code to;
1) change to a different sheet
2) select a specific cell range
3) save that range as a text / xml file with a filename derived from a cell outside the given range
Here is where I have got to so far, but it fails
Private Sub Export_Click()
Sheets("Parsed Data").Select
ThisFile = Range("B1").Value
ActiveWindow.SmallScroll Down:=-15
Range("A1:A41").Copy
SaveAs Filename:=ThisFile, _
FileFormat:=xlTextMSDOS
Application.WindowState = xlMinimized
End Sub
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedI have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.
Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.
This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)
Here are screenshots of what I am trying to accomplish. [URL] .......
I have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
