I have created "front page" which allow user to enter their enquiry.
The formula will be as per below.
Issuing
World Bank -->if amount less then 500,000 = amount x 0.03125%; if amount from 500,000 - 2.5mil = amount x 0.015625%
Royal Bank -->amount x 0.0625% x no. of month (min charges 100)
Deutsche Bank -->0.025% per 3 months (min. S$50)
Stand By LC
World Bank -->0.02% per quarterly (3mths) - Amount X Rate X 1 (1 to 3mths) or X 2(4 to 6 mths) or X3 (7 to 9 mths) or X4 (10-12 mths)
Royal Bank -->0.25%p.a by day (Principal x Rate x Day divide by 360 day x 100)
Am I able to set a formula for example:-
1. When I click on Mode of payment - Issuing
2. On my right hand side under column "Bank Name" will list down all bank available
3. On my right hand side under column "Estimate cost" will auto calc the cost base on the bank's formula.
I have a form where I want to change the color box on the left hand side see attached image. Now it is a static and I want it dynamic where the user chooses the color. Now it is constant using an image with the color green, red, blue, etc... I want a color picker so user can pick their own colors and when the color is picked the code will pick the color number.
Need a way to switch the default positioning of pivot table row totals? I would like to left justify them insead of always having the totals on the far right side where they are often out of view to the user without scrolling. I end up having to place 2 pivot tables side by side so that I can make the totals appear first.
I've been given a spreadsheet that is poorly constructed but I'm not allowed to alter.
The layout is: Box Name Box Date ID1 ID2 ID3 .... Where there is not a fixed number of IDs in each box (There are five different sheets so I'll have some fun concatenating results)
Given a list of IDs I need to return the box name and box date that the ID's file sits in. The spreadsheet has blanks everywhere and the numbers contained in rows are non-consecutive and smaller values can appear later in a column than larger ones.
I think I need some combination of index, offset and maybe sumproduct? TBH, I avoid sumproducts like the plague, preferring to utilise sumifs and dynamic named ranges since this improves clarity so I'm basically a newb at them.
Any skeleton framework that you think would work to return the text values for the LHS where the number could be anywhere? Once I can see a rough example I should be able to get to grips with the logic and wrangle it into the necessary solution.
Is it possible to compare two columns side by side to highlight/change color of difference between the two cells
I need to compare and show the changes to the record from previous version and generate a report which will highlight the changes (Rather than just saying that record has changed It should tell what has changed)
Is there a way to have separate Report Filters for each column in a pivot table?
I am trying to create a pivot table with 3 columns - 1: account code 2.current year (2011) 3. prior year (2010)
My Row Label is an account code field - each row is a different account code that sums up dollar amounts for the two financial years. The problem is that I need Columns 2 and 3 to have separate Report Filter criteria. So in Column 2 - I need the filter to weed out anything that is not 'Financial Year 2011'. In Column 3, I need the filter to weed out anything that is not 'Financial Year 2010'. Setting up a filter for one screws up the second, and vice versa.
Alternatively, how can I make two side-side-pivot tables that each have their own Report Filters?
I have two sheets that need to have unique partial matches aligned side by side. My first sheet is my database. The righter most column of this sheet contains a unique combination of letters and numbers.
My second sheet contains a single column which I export each month from our CMS and is a list of URLs. Within each of these URLs appears the unique set of letters and numbers from sheet 1 (and only appears once).
There are about thrice as many URLs in sheet 2 as there are entries in my sheet 1 database.
Ideally, I would like the URL from sheet 2 that contains the unique combination from sheet 1 to be pasted in the cell immediately to the right of the given unique combination.
However, I will settle for a list of trues and falses next to the URLs in sheet two that I can erase the falses, sort and paste next to the sorted list from sheet 1.
i have 2 excel worksheets. One of them contains over 20,000 rows of entries (old side) and the other contains about 900 rows of entries (new side). Both contain the same 9 column headings. I've shortened the list in my workbook example.
What i need to do is excel to delete any row on the old side that is not contained on the new side. I don't need the rows to match fully but the column A's (Doc number) are what i want it to check against. I've included a summarised version of the database and the old and new are separated by a heavy blue line. Need to be left with the same rows on either side of that blue line at the end.
I'm trying to figure out how some conditional formating and I cant get it to work.
What I want is for column H to be highlighted based on the value of column I. So... If I2<721, then H2 will highlight green. If I2 is between 721&780, then H2 will be highlighted yellow. And if I2>780, then H2 will be red.
I know how to do it one cell at a time, but I need it to apply to the entire column based on the cell next to it. Also, I dont have access to visual basic.
I have a sheet with a number of repeating blocks copied down.
I would like a macro that when I select the first block, say range "A1:D30", the macro will cut the blocks below and put them side by side, so that I can compare them across.
i.e cut "A31:D60" and put it in "F1:I30" and so on ...
i have a sheet that contains side-by-side,below two formatted colums which has continuous weeks appearance(named PE sheet). i wanna to rearrange the colums to be a single top-down colums according to continuous weeks(named sheet2.are there any easier and faster techniques?a macro probably or a function? arrange(english).xlsm
I'm trying to solve for 'X'. My finished good inventory (FG Inv) is 80pcs. That will cover customer demand out to 2/3/2009. Therefore, I have 4 DOH of inventory.
I have a simple inventory spreadsheet that is doing everything I need minus one function. I have not been able to figure out how to make this work yet, maybe I can get some help. We remodel apartment complexes. I purchase material and hand it out to the contractors. I am using one page to track all movement of the items, but I have another page that I want to do that math and tell me what I should have on hand. Example: (On sheet1 "movement") I hand out 20 outlets. On my inventory on hand sheet I have a line that says "Outlet", the current quantity is 40. I have a drop down list so that on the Movement page I select "Outlet" in column A and in Column B I put in the quantity. I want to keep a running total on my IOHand page of everything, so that it would automatically subtract the 20 I just handed out and leave my IOH as 20. I have about 100 items on my IOH page. I assume I need a formula in the quantity cell of my IOH page that will search the Movement page and look for a match to what is in column A and Sum all of my "outlets" or "sinks" into the right cell.
I am having trouble finding the days on hand for each SKU. I am trying to get a formula to look at how many days will the total SKU Qty cover in the Forecast_qty. I used a vlookup to make sure the sku = sku but i cant get the days on hand number.
I'm using commandbutton in a worksheet, and would like it to have the same cursor displayed as the 'forms' control.... for some reason, it remains an 'arrow' when the forms becomes a hand. I've identified the 'mousepointer' property, as well as the 'mouseicon' properties; however, it appears that for some reason, I don't have the hand-cursor icon on my system. (i've searched the hard disk, and apparently this is not entirely uncommon according to some posts I've found around the internet).
So my question/favor to ask is: 1) where can i find the standard windows xp system scheme "link select" hand-cursor (control panel->mouse->mouse pointers... last one)
2) I believe its filename is "hand-l.cur"..... if anyone reading this post can quickly check their windowscursors directory for this file, and reply/ upload it
The questions are shown on the attached spreadsheet. There are 2 questions one on each sheet. On the spreadsheet the yellow cells indicate data that I'd import ( on the left) and input by hand to get the process going. The green cells have the correct numbers in them but I've had to manipulate them by hand.
I have csv file with tab delimited fields (see attached blacklist.csv). 3rd and 4th fields are in format dd/mm/yyyy hh24:mi:ss, some fields can be zero. I need to split data to columns and display datetime fields in format dd.mm.yyyy hh:mm:ss.
OK... open csv in Excel, select column A, press button "Split in columns", select tab as delimiter, choose date format (DMY) for 3rd and 4th field and press OK. Test is splitted into columns, now select columns C and D and select desired format "dd.mm.yyyy hh:mm:ss". Then I select columns A:E and set column widths to fit data in columns. This all is OK and without problems (see attached file Handmade.xlsx).
But now... Now I record all previous step into macro. There is macro text: [Code] ....
Now I copy macro text into clipboard and open blacklist.csv again. Insert button to list and bind it to new macro. Paste text of macro from clipboard. (See attached file blacklist_beforeClick.xlsm). Now click button Btn and voila... some dates remain in previous format, some dates seems to be in desired format, but day and month are swapped. Why are there differences when comparing data made by hand and data made by macro??? compare.jpg This is the same behavior in more computers, some use Czech version of Excel 2010, some use English version.
Is there a way (in VBA) to position a specific cell of a worksheet in the upper left-hand corner (i.e. cell H40)?? I have some code that I'd like to have do this.
Attached is a copy of my data and i want to find the mode of each months data without typing it out into long hand form, eg. 111122222333344444 etc. so i believe the answer will be some where around 5 for most of them, but i just don't know a formular to show it automatically on the spread sheet.
i try do function, which will be search/monitoring in selected cell (colored – yellow, orange, blue) and display (in green/results column) the last value in row colored/selected cell (first value from right side – results will be only for row).
I have a name list of my student with images using comment box. The problem is i want to put numbers on the right side of comment box automatically according the names list which makes easier to me to recognize them.
