Show Full File Path Ignoring Drive Letter
May 2, 2014
I am trying to allow users to select a file, and then the file name/ the file path / and date are added.
Right now, all those functions work in the following code, but the file path shows up as a letter drive. As there could be upwards of 50 people using this file and the mapped drive could be different, i wanted the full path to be displayed.
Code:
Private Sub File_1_overwrite_Click()
Dim filename As Variant
Dim filename1 As Variant
filename = Application.GetOpenFilename(, , "Select Programme")
filename1 = filename
filename1 = Mid(filename, InStrRev(filename, "") + 1)
File_1_link = filename
file_1_name = filename1
File_1_date = Format(Date, "MM/DD/YY")
View 8 Replies
ADVERTISEMENT
Sep 27, 2006
I have a variable ("DestFile") that defines a path to a file (used in saving the file)...
I'm in the process of getting a Sub to hyperlink to this file, but in some circumstances, I may only want to hyperlink to the folder, not the actual file...
How would I go about trimming the "DestFile" address to get a "DestFldr" address?...
An example of "DestFile" might be;
S:BryanFor KenGulf ConstructionST0609014-t.xls
(the file name length may vary)
What code can I use to consistently trim it back to;
S:BryanFor KenGulf Construction
as the "DestFldr" variable?
View 4 Replies
View Related
Jun 12, 2009
I have a file which is kept on the C Drive. Each day, a different excel file is downloaded to a usb memory stick. The first file reads data from this file. The problem is, the drive letter keeps changing from E to F and the macro then crashes out.
The file on the memory stick always has the same name, so is there a macro to find the drive letter of this file and then use it in my existing macro?
View 10 Replies
View Related
Dec 5, 2011
I've made a macro that would create some folders on a shared drive.
there is an issue if the path i want to create is too long.
I get this error.
Uploaded with ImageShack.us
is there anything we can do to pass this or any solution for it?
View 5 Replies
View Related
Jan 10, 2014
I'm wondering what is the syntax to open a msoFileDialog box and select a file, resulting in setting a variable to the entire file path. If I use
msoFileDialogFilePicker
I'll only get the file name, without the path. I'd like to get the full path ending in the file name.
View 3 Replies
View Related
Aug 11, 2004
whats the simplest method of including the FULL file path on all printouts from excel.
View 9 Replies
View Related
May 27, 2014
In the attached excel, I will be putting a string (Which will be a result of another formula) and there will be a table in column A & B(Length of the table will vary).
What I need is a formula to search entire column B and get the file names which is having that string and also the corresponding path
Table E6 to F9 contains the desired result (The result wont be more than 3 at any point of time
Search.xlsx
View 3 Replies
View Related
Sep 6, 2006
I do a search on my directory for all *.xls files each month which produces a list some 11,000+ lines long. Attached is a very small sample.
I then import this into Excel – see tab Raw Data
What I want to produce is a list shown on tab Finished Data, so that I can then sort etc.
Has someone already done this before and got the code, or can someone point me in the right direction on how to arrive at the finished data?
View 9 Replies
View Related
Jan 5, 2010
I have an excel 2003 template containing a userform that is displayed using the workbook_open event.
The userform causes excel to crash with file/path error 75. i have tried many suggestions given on ozgrid and several other forums with no joy.
When the userform crashes, the debugger stops on DataFormNew.show.
I have added stop commands in the initialise procedure to see what is going on and it appears that my userform has disappeared!
to upload the excel template and any other information required to get this sorted.
its size is 765 KB which exceeds the size limit to attach to the post.
here is the workbook_open macro:
Private Sub Workbook_Open()
'On Error GoTo MyError
'Call UnProtectAll
'Dim frm As UserForm
'For Each frm In UserForms
' Unload frm
'Next
View 9 Replies
View Related
Aug 7, 2008
When loading my workbook, my userform loads perfect, but when I go to hit the "next" button. It crashes with the error:
"Path/File access error."
The next button code, quite simple: ....
View 9 Replies
View Related
Jan 5, 2008
Excel 2002 SP3
When a file is currently open, and the user selects "Save as", it takes them to the files native directory. (Where it was last saved).
If the user has that same file open, opens another file from a different directory, goes back to the first file and selects "Save as", it takes them to the location where the last file was opened from.
View 9 Replies
View Related
Nov 28, 2007
information about users selecting a folder at this link. However, how do I change the starting point to a network drive, as opposed to "My Computer"?
For example, we reference our network drives like this:
\OurSite.comSharedFoldersDivisionName
View 6 Replies
View Related
Jan 31, 2008
I have a user whose links in his spreadsheets are in UNC format. He changes them to drive letter mappings, but when he opens the workbook again, the UNC format returns. how to change the links so that they remain as F: etc.. rather than \servernamesharename The user has MS Excel 2000 and Windows Xp Professional
View 2 Replies
View Related
Jan 31, 2008
I have path data (subfolder depth varies) that I need to trim to filename only.
Example:
/folder1/folder2/filename1.eps
/folder1/folder2/folder3/filename2.eps
/folder1/folder2/folder3/folder4/filename3.eps
Need to end up with:
filename1.eps
filename2.eps
filename3.eps
View 6 Replies
View Related
Oct 26, 2011
The folder which contains the Excel file I'm working on is
C:Usersar3DocumentsKey Performance Indicators
however if I place =INFO("directory") in a cell I get
C:Usersar3Documents
Is there a function where I can get the full path of the workbook in the cell?
View 2 Replies
View Related
Apr 5, 2012
I have the following code and I it works except it gives the full file path rather than just the name of the file.
I have been racking my brain for ages to try and figure how to just get the filename to show but I have been unsuccessful.
Code:
Private Sub CheckBox1_Click()
Range("K43").Select
' Set up list of file filters
[Code].....
View 9 Replies
View Related
Apr 1, 2014
I would like the full path in the excel 2007 title bar automatically every time I open a excel file.
The macros I try from other sources all end up in errors. I need step by step instructions.
View 6 Replies
View Related
Jan 10, 2008
how to allow both these codes to work on say sheet 1. I can get one to work just fine. So, any tips on how to get them both to work on the same sheet would be great.
Private Sub Worksheet_Activate()
End Sub
Private Sub Worksheet_Change(ByVal Target As Excel. Range)
With Worksheets("Sheet1")
If Not Application.Intersect(Target, .Range("n1:n200")) Is Nothing Then
If Target = "S" Or Target = "s" Then Target = "Submitted"
If Target = "A" Or Target = "a" Then Target = "Approved"
If Target = "I" Or Target = "i" Then Target = "Investgating"
Else
End If
End With
End Sub
and this,.............
View 2 Replies
View Related
Jun 19, 2013
My Excel 2010 spreadsheet contains client data like the below:
A
B
C
D
E
What I'm trying to get from this is a personally addressed email with 2 attachments, one will be standard to all recipients and one will be unique and specific to that recipient. The filename of the unique attachment will contain the reference but will have some other stuff in the filename as well on either side that I will not be able to remove.
In terms of the file locations the unique ones will be in subfolders of the folder holding this workbook and the generic one will be in the same folder as the this workbook.This is some adapted code that solved a similar problem (in Excel 2007 though) on a different website.
VB:
Sub Mail_Report()
Dim OutApp As Object
Dim OutMail As Object [code]....
In that case the file started with the "reference" field but in my case it is in the middle and the formats vary depending on the provider, there will only be a maximum of 5 providers but I would like to avoid 5 different macros if at all possible so I need a search function of some sort.
View 2 Replies
View Related
Mar 4, 2013
is it possible to configure Excel in order to save the Hyperlink path for a file with absolute path and non relative?
I notice that the hyperlink is ....pdf ry.pdf
if I change the position of the file excel there is a problem!
I would like to save es. d:invoichepdf ry.pdf
View 1 Replies
View Related
Oct 3, 2012
I want to run a macro to separate File Name and Path from the given complete path
For Example
Code:
In Column A : Given Complete Path " C:MainFolderRecordsSubFilesFile1Record.pdf
I need it separeted like
Code:
In Column B :File Name = Record.pdf
In Column C :File Path = C:MainFolderRecordsSubFilesFile1
Is there any way to do this through a macro
View 2 Replies
View Related
Sep 4, 2007
is there a way i can make my user form in full screen? i already drag it to it's full screen but i still can see the blue tool bar with X (close) button i also want to run the macro when i open the file i want it to run automatically with full screen....
View 7 Replies
View Related
Sep 2, 2008
I want to write a macro that would go to a certain drive and search for a file?
View 9 Replies
View Related
Dec 1, 2009
If you don't know what the drive letter will be, because on other people's computer it could be different than what you have.
I only have the folder address
\ROGERSDAILYREPORTSXLSDM
View 9 Replies
View Related
Jun 13, 2008
I made an excel sheet that links to other sheets on a different drive. It works while I am making it, but upon save and reopen all the hyperlinks produce this error: The address of this site is not valid. Check the address and try again.
Auto Merged Post Until 24 Hrs Passes;Figured it out. File, Properties, Summary tab, Hyperlink Box to base Drive. Auto Merged Post Until 24 Hrs Passes;Figured it out. File, Properties, Summary tab, Hyperlink Box to base Drive. Auto Merged Post Until 24 Hrs Passes;Figured it out. File, Properties, Summary tab, Hyperlink Box to base Drive. Figured it out. File, Properties, Summary tab, Hyperlink Box to base Drive.
View 2 Replies
View Related
Jul 25, 2014
I am trying to move and rename an excel template file using a macro. My code works fine when it is moving the file locally on my C: drive. However, when I try to do it on a mapped network drive I get a Path/File access error. Here is the relevant code:
[Code] ......
I tried it both ways that are commented out - both give me the error. I have permissions to read/write in all relevant folders. What am I missing here?
View 2 Replies
View Related
Apr 14, 2013
I need code to print a file located in my C drive.
View 6 Replies
View Related
Mar 20, 2014
I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
View 1 Replies
View Related
Nov 3, 2009
I am trying to import some csv files so I can combine them, but am having probs with the filename and location.
Sub test()
Dim wsName As String
wsName = ActiveCell
Sheets("Data").Select
With ActiveSheet.UsedRange
LastRow = .SpecialCells(11).Row
End With
With ActiveSheet.QueryTables.Add(Connection:="TEXT; &thisWorkbook.Path &" " & wsName &", Destination:= Range("A" & LastRow))
.Name = wsName
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.RefreshStyle = xlInsertDeleteCells.....................
View 5 Replies
View Related
May 21, 2014
How to download the zip file from internet explorer and save it into c: using VBA codes.
I have tried many codes from the internet but none of them are working. i am facing problem for the popup box. the macro which i have found was not supporting to it.
Please find the source data from my web page.
[Code] ....
View 3 Replies
View Related
