I have a worksheet that I have to sum in one cell and count in another cell from A1:until it hits a blank cell. The thing is, I insert the blank row (only 1) in different places depending on the new data and where the cut off is. How do I do a sum formula from cell A1...until I hit a blank and a Count formula in cell B1: until I hit a blank cell?
I have roughly 150 cells I am trying to count, some blank, some not blank, some with numbers. All are in the same column. I want use a simple function that sums the total number for me, say from (A2:A153). Answers?
View 9 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
View 6 Replies View RelatedIn any case, what I have is a set of cells that may or may not be filled, and which frequently get changed around. As I need the data counted in a specific way for "shenanigans", I am... getting quite tired with having to manually adjust this whenever my co-workers decide to adjust something (and I have been told that throwing bricks at them until they stop is not a valid option).
Basically, I want to count the cells in a way so that for every time a cell is filled, a counter repeats the previous number before continuing the sequence.
I.e
Dog
1
Rat
1
[code]....
My issue is that I have no idea how to get this to count right. I know the theory of how I want this to work, but I just have no idea how to get it to function. The logic of how I want it to count is below, but, again, I just have no idea how to go about getting it to work right without manually typing in the counter, and without ending up with the code working wrongly when there's two filled cells at the top.
Item
Counter
"Logic"
Dog
1
Dog
Rat
1
Dog
[code]....
I've got one column with names in it and a second column with dates in it. What I'm trying to do is generate a count in a third column next to each name with the number of times the name appears in the name column when there is a date in the corresponding date column. If the date column is blank I want the count column to remain blank.
For example:
Assigned To: Number Completed Date
Joe 2 1/1/06
Jane
Joe 2 2/22/06
I know that there will be repeated info but the end user doesn't care.
It effectively counts the number of non-blank (>0) rows in an array. This
formula is limited, however, in that every column requires a separate
statement. I would like to find a function that could handle an array of any
size with a single statement.
100
110
000
001
3=SUM(IF((A1:A4>0)+(B1:B4>0)+(C1:C4),1,0))
1=OR(A1:C1>0) for
every row in the entire array. Unfortunately, according to this document AND
and OR functions cannot be nested within SUM+IF statements:
Dim oRow As Range
Dim cNonBlanks As Long
For Each oRow In Range("50:80").Rows
If Application.CountA(oRow) <> 0 Then
cNonBlanks = cNonBlanks + 1
End If
Next oRow
In a single cell I want to return the number of columns in a matrix which contain entries. So, for the matrices below the formula should return '2' (two columns contain values):
A1: 0 , B1: 0, C1: 1
A2: 1 , B2: 0, C2: 1
A3: 0 , B3: 0, C3: 1
A1: d, B1: e, C1: 0
A2: 0, B2: f, C2: 0
A3: 0, B3: g, C3: 0
On sheet4 i need the total from sheet1
here is what i'm looking for in sheet1
IF COLM A2 to A600 contains the name "AUSTIN" and if in colm M cell is blank then add total to sheet4
how to create a macro that will count blank cells. I've tried several different variations of a basic 'count cells' macro, but I can't seem to find the right one.
If anyone would be kind enough to post a solution VBA, I would be extremely thankful, and so would my superiors. I'm an intern trying to get my foot in the door, and this would certainly be a first major step for me.
I have a spreadsheet where I'm trying to determine the number of weeks that have transpired since the last sale of an item. COUNTBLANK is the direction I started in but it only shows the number of blank cells, it doesn't count the blanks until it recognizes a numeric value and stop. Essentially, I need a "count until x happens" function.
I've attached an example to walk through the issue. The weeks are across the top, the item number in col A, and I've put the result I'm expecting in col B.
I am creating a chart and want to get a count of only the blank cells in Column D only if there is information contained in Column A (same row). I am using Excel 2003.
View 2 Replies View Relatedgetting a formula to do this
I have
......D E
5 )......1
6 )......2
7 )......3
8 )......4
9 )......5
10)......6
11)......7
etc down to 31
They only show up when the cell next to it is not empty.
=IF(ISBLANK(D5),"0",(1))
=IF(ISBLANK(D6),"0",(2))
etc
If nothing is put into say D5 D6 or D7 but something is put in D8 then i would like E8 to become 1 as it is the first to be filled.Then when D9 has something in it, it becomes 2 if D10 has nothing in it it gets left blank but when d11 has something in it e11 becomes 4 counting the blank cell in between.
How can this be done.
I have a column, that have different values in each cell.
I am trying to get the count if the value is NOT equal to Closed and or BLANK
My formula : =COUNTIFS(O7:O827, "<>Closed", O7:O827, "<>""")
still not working, it counts the blank cells !
I want to be able to count the number of rows until I hit a blank row, and use the counter as an index. How is that possible?
I have a no. of rows that are fulled, followed by a blank row then another set of rows that are filled then a blank row etc. I want to count the rows filled till the blank row and set the counter to that number. Then I want to do the same with the next set of rows etc.
So what I have is an unknown number of rows, starting at row 2. The first row (row 2) contains information from A2:M2 but all rows after this in column M will be blank up to a particular row. What I want to do, is count how many rows are blank in the column M up to the last blank cell and fill this with a specific word. I have attached a basic layout workbook to show what I want. There is a comment on cell M3.
View 2 Replies View RelatedMy Macro opens an excel file and I've to count the number of blank spaces for every filled column. I'm using CountBlank function for that.
But, the code fails at the countBlank line by saying Type Mismatch.
Code:
Sub Snippet_Code()
Dim apdata as excel.application, wbdata as workbook
set apdata = new excel.application
Set wbData = apData.Workbooks.Open(Filename:="ABCD.xlsx")
For colnum = 1 to 50 'Columns from 1 to 50
[Code] .......
My code fails at the BlnkCnt part. I also tried assigning the two cell addresses in two variables and passing the variables to the range method. But there again, I get the error of Method Range of class _Global Failed.
What might be the error?
I am trying to count the number of cells in A1:A1000 which do not have either zero or blank in them.
View 4 Replies View RelatedI have several in a row Cells A2: AE2 'I need to count all the empty cells but has a discretion.
If you find the letter 'X' will count all the empty cells before the 'X'.
DSA
X
1
2
3
4
5
6
0
0
0
0
See the example all cells that was before the 'X' were counted.
The result would be six cells (C3=6)
I want to use this count function =COUNTIF(A$1:A1,A1) , but don't count blank cells, if cell is blank answer is 0 zero .
Sheet1 AB10.6127.813 041.215 06 071183190.621020.91114112 0137.82143.91150.63Spreadsheet FormulasCellFormulaB1=COUNTIF(A$1:A1,A1)B2=COUNTIF(A$1:A2,A2)B4=COUNTIF(A$1:A4,A4)B7
=COUNTIF(A$1:A7,A7)B8=COUNTIF(A$1:A8,A8)B9=COUNTIF(A$1:A9,A9)B10=COUNTIF(A$1:A10,A10)B11
=COUNTIF(A$1:A11,A11)B13=COUNTIF(A$1:A13,A13)B14=COUNTIF(A$1:A14,A14)B15=COUNTIF(A$1:A15,A15)
I have a master sheet which shows from Jan to Dec (in 1 sheet), so I did a break down on each tab e.g Jan (First Tab), Feb (Second Tab), etc.
So basically now i have some cells that are blank, in the breakdown sheet which i copied from the master copy.
i use counta but it returns me 140 instead of 130(manually calculated). im guessing that is because in every cell of Jan tab i have "=master!D1" in it.
how do i formulate a proper formula for this?
This formula counts how many dates in the range match the month in cell (Q3). How do I get this formula to to not count empty cells. I keep getting $VALUE! as my answer when I include all the cells in the range.
This is the formula:
=SUMPRODUCT(--(P20:P976-DAY(P20:P976)+1=DATE(YEAR(Q3),MONTH(Q3),1)))
This is the formula in the cells of the range that is being used above:
=IF(D26="","",IF(F26"",F26,IF(I26"",I26,IF($Q$3"",$Q$3))))
I needed this formula to leave the cell blank if all the data cells were blank that's why I have =IF(D26="","", at the begining.
I seem to be 'search challenged' today - I'm sure this is easy. How does one count the number of non-blank cells in a range using VBA?
View 7 Replies View RelatedCan i get a simple formula to count a number of blank cell in a column ?.
View 9 Replies View Relatedhow i can count the coloured blank cells??.
View 8 Replies View RelatedI am looking for a formula to count 2 blank cells (and return the value as 1 rather than two) but only when the cell preceding has data in it. eg in A11 there is data but in A12 & A13 it is empty = 1. PS If you are on the boards Jim I will email you an update when I get home tonight.
View 8 Replies View RelatedI am looking for a formula to count the number of blank cells between the cell I am in and the first non-blank cell to the left.
View 9 Replies View RelatedI have a spreadsheet that has 36 columns and 6000+ rows. Each column has a mix of blanks and content, which is an X. See example of the pattern below, column A. I want to run the COUNTBLANK function through the entire column A so that it assigns a value in column B, next to the content it relates to. Line B4, B9, and B11 would have results, in the example below. I want to be able to apply a formula the entire worksheet, all 36 content columns, and over 6000 rows, so that I can obtain the results quickly by filling down, across, etc. I suspect a loop might be in order. Currently, I have to run the COUNTBLANK between one X and another, repeating that tediously over and over again.
---A----------------------------B
1 X
2 blank
3 blank
[Code]....
I've got a spreadsheet that I do every month with columns of numbers that I average. This sheet has to match about 10 others similar. The columns are divided by Weekdays, Saturdays, Sundays. But some months there are no entries for certain cells on Saturday or Sunday.
I thought that if I just used the Average function, it would dismiss and not count the blank cells. Alas, apparently not. I've highlighted in yellow the one column that I'm really having trouble with.
I need to count the number of non blank cells in a column and add a text string to the result to show, for example, "75 Clubs" as the result. I have tried "=Count(A1:A90) + Clubs" but this does not work.
View 2 Replies View Related