I have a spreadsheet where I'm trying to determine the number of weeks that have transpired since the last sale of an item. COUNTBLANK is the direction I started in but it only shows the number of blank cells, it doesn't count the blanks until it recognizes a numeric value and stop. Essentially, I need a "count until x happens" function.
I've attached an example to walk through the issue. The weeks are across the top, the item number in col A, and I've put the result I'm expecting in col B.
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
how to create a macro that will count blank cells. I've tried several different variations of a basic 'count cells' macro, but I can't seem to find the right one.
If anyone would be kind enough to post a solution VBA, I would be extremely thankful, and so would my superiors. I'm an intern trying to get my foot in the door, and this would certainly be a first major step for me.
I am creating a chart and want to get a count of only the blank cells in Column D only if there is information contained in Column A (same row). I am using Excel 2003.
If nothing is put into say D5 D6 or D7 but something is put in D8 then i would like E8 to become 1 as it is the first to be filled.Then when D9 has something in it, it becomes 2 if D10 has nothing in it it gets left blank but when d11 has something in it e11 becomes 4 counting the blank cell in between.
So what I have is an unknown number of rows, starting at row 2. The first row (row 2) contains information from A2:M2 but all rows after this in column M will be blank up to a particular row. What I want to do, is count how many rows are blank in the column M up to the last blank cell and fill this with a specific word. I have attached a basic layout workbook to show what I want. There is a comment on cell M3.
I have a master sheet which shows from Jan to Dec (in 1 sheet), so I did a break down on each tab e.g Jan (First Tab), Feb (Second Tab), etc.
So basically now i have some cells that are blank, in the breakdown sheet which i copied from the master copy.
i use counta but it returns me 140 instead of 130(manually calculated). im guessing that is because in every cell of Jan tab i have "=master!D1" in it.
This formula counts how many dates in the range match the month in cell (Q3). How do I get this formula to to not count empty cells. I keep getting $VALUE! as my answer when I include all the cells in the range.
This is the formula: =SUMPRODUCT(--(P20:P976-DAY(P20:P976)+1=DATE(YEAR(Q3),MONTH(Q3),1)))
This is the formula in the cells of the range that is being used above: =IF(D26="","",IF(F26"",F26,IF(I26"",I26,IF($Q$3"",$Q$3))))
I needed this formula to leave the cell blank if all the data cells were blank that's why I have =IF(D26="","", at the begining.
I am looking for a formula to count 2 blank cells (and return the value as 1 rather than two) but only when the cell preceding has data in it. eg in A11 there is data but in A12 & A13 it is empty = 1. PS If you are on the boards Jim I will email you an update when I get home tonight.
I have a spreadsheet that has 36 columns and 6000+ rows. Each column has a mix of blanks and content, which is an X. See example of the pattern below, column A. I want to run the COUNTBLANK function through the entire column A so that it assigns a value in column B, next to the content it relates to. Line B4, B9, and B11 would have results, in the example below. I want to be able to apply a formula the entire worksheet, all 36 content columns, and over 6000 rows, so that I can obtain the results quickly by filling down, across, etc. I suspect a loop might be in order. Currently, I have to run the COUNTBLANK between one X and another, repeating that tediously over and over again.
---A----------------------------B 1 X 2 blank 3 blank
I've got a spreadsheet that I do every month with columns of numbers that I average. This sheet has to match about 10 others similar. The columns are divided by Weekdays, Saturdays, Sundays. But some months there are no entries for certain cells on Saturday or Sunday.
I thought that if I just used the Average function, it would dismiss and not count the blank cells. Alas, apparently not. I've highlighted in yellow the one column that I'm really having trouble with.
I need to count the number of non blank cells in a column and add a text string to the result to show, for example, "75 Clubs" as the result. I have tried "=Count(A1:A90) + Clubs" but this does not work.
I am using the following to count my blank rows. =COUNTIF(report!N2:N303,"")
Using a formula, rather than VBA, how can I modify this formula to accomodate a variable ending range. Without thinking I initially just counted the blanks in column N - yes there were lots of blanks. My goal is for the end user to not have to modify the formula.
I have the following formula in H2 =COUNTA(report!B:B)-1 which would give me the number of rows used for the month. I tried referencing the countif to cell H2 but, as of yet, have not been successful.
I am using excel to analyze stock changes. Yahoo spits out a column with dates and another with closing prices but occasionally inserts a row showing a dividend, something like this:
In the spreadsheet, column A is date and Column E is closing price, such that the cell in column E where the dividend is listed is blank.
The problem- as I update data each week, the dividend row moves. How can I consistently figure price changes for 4 weeks and 13 weeks without getting messed up by the dividend row? Is there to auto delete the row or make the formula count down 4 cells in the price column, while skipping any cells without data?
I'm trying to write a VBA procedure that will loop through all the worksheets within my Excel workbook one by one (the number of worksheets in the workbook may vary from month to month) and count all the non-blank cells in Row 12.
If the number of non-blank cells is anything other than 24, I want the procedure to display an error message. (Each individual sheet in the workbook is supposed to contain 24 column headings, and all the column headings are in Row 12).
I have a spreadsheet that contains dates in column A, the number of rows between each date can vary. Selecting a cell with a date in will activate a checklist in the form of a UserForm.
I am trying to create a macro that will count the number of rows from one cell with a date, to the next cell with a date, and then resize the selection for printing.
So far I have this;
Code: Sub test() Application.ScreenUpdating = False Set InitialCell = ActiveCell
[Code]....
My problem with this code is that when it reselects the InitialCell, the UserForm is reactivated. Is there a way to achieve the same results without having to reselect the InitialCell, and therefore the UserForm wont pop up? I tried adding the Unload UserForm1 line but it doesnt have any affect, the form still pops up.
For reference, I’ve attached a sample spreadsheet. I’m trying to find a way to calculate the max number of blank cells between a range of cells. As an example, in row two of my data, the result would be 3 using the range of F2:N2. Can this be done without the use of VB?
I am trying to count the number of times a code appears in column N, IF the corresponding cell on column T is blank. Column T either has a date or is blank and column N has a 4 letter code.
This is what i have been trying.
=SUMPRODUCT((CMRF!T:T=ISBLANK)*(CMRF!N:N="B2"))
I want the code in column N to match to the code currently in cell B2, i have also tried using "" instead of ISBLANK but i get # NUM! error as a result either way. the result should just be a number i.e. 400 (cells with the same code as B2 and no date in cell T)
