How do I get 'SUMIF' to ignore blank cells? sumif(a1:a10,h1,b1:b10) - then fill down
a= ID number
h1 = ID number
b= cost info
eg 'matt' in 'h' is finding 'matt' in 'a' and reporting on the cost info against that name in 'b', but in the middle of the list a blank is matching a blank and returning a subtotal which is in the cost column. I want to put sumif(a1:a10<>"",h1, b1:b10) but this doesnt work!
I have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI would like a formula that checks for blank cells only between C1:C10 and E1:E10 and then insert the first and last names of the person associated with these blank cells (which are located in A1:10 and B1:B10) on another worksheet, which for the sake of argument can be called 'sheet2'.
View 2 Replies View RelatedSay I have a column with cell values 4, 0, 0, 5, 0 , 0, 0, 2, 0, 3
What I am trying to do is have in the next column a formula which returns
the number adjacent to it multiplied by the number of blanks between it and
the next non-blank cell.
So, for the example above, the output would be 8, 0, 0, 15, 0, 0, 0, 2 etc
Suppose I have a cell containing the formula:
Code:
=INDIRECT("'"&B$3&"'!J"&ROW($J11))
Which pulls data in from another sheet in the workbook. If the referenced cell is empty, this has value 0.
I'd like to then include this cell in the calculation of an average, ignoring it if the cell it pulls from is empty but including it if that cell contains 0.
I'm looking to total a range of cells ONLY if they have a value of 0 or more
entered in them. In plain english:
Sumif A1 is >=0
Sumif A2 is >=0
Sumif A3 is >=0
and so on. Where every cell in the range must have a value of 0 or more
entered before the function will return a result.
I am trying to do sumif on below
A B C Total that I need to achieve
-520 Check [blank] -520
-321 Check -321 0
Criteria
Sumif B2 have "Check" add A2 then -C2Problem is C2 although shows no value, there is formula that returns Blank Value. See attached file.
I have several different named ranges that I want to sum and the user chooses the range from a drop down box. I want to select the range based on that choice but when I reference the cell that contains the reference to the selected range I get a result ** 0, but no error. I realize I could use several nested "If" statements but I was looking for a more streamlined approach.
here is the formula:
=SUMIF(Regions,B4,worksheet!K13) K13 = the name ** the selected range.
if I put the name ** the range directly into the formula I get the correct result.
On the spreadsheet Im creating I am using cell referencing. The user will input data into the blank cells, and cell referencing will put them into another table. Then I add these using an IF(OR(ISBLANK formula.
However, the empty cells come through as 0's rather than a blank cell. As they're coming through as 0's, they're being calculated into the formula, and this is causing problems in my main table.
Is there a formula I can use to ensure that the empty cells being copied over do not give off any other value?
I tried to use a few different IF formulas to only let specific data go through, but it didn't work. I tried to have the blank cells produce a letter so that they wouldn't be calculted in the formula, but letters are also counted as measured values.
In cell K8 is the value (General) 800. In C8 is the value (Also general format) 768.
=IF(C8
I'm pulling data from my servers (alarms) and have roughly 10 alarm points, reporting 9000 alarms. I've been able to pull them off the server on an excel file, have been able to sort them, but would like to venture into the hope that there is some sort of formula that would take the duplicate alarms(cell a1-a9000), delete them, and report how many duplicates were removed from the list in cell b1-b10
xyz
xyz
xyz
xyz
123
123
zzz
---
somehow it could be turned into
"xyz 4"
"123 2"
"zzz 1"
I need to create a range of cells in Column A. I know the first cell, A2. The final occupied cell will vary. Once I have the range object I would like to step through and analyse each cell in turn using a For/Each loop.
The code I have so far is:
Public all_structures As Range 'Range required for for/each loop Column
Public last_structure As Range 'Last cell in Column
Public molcell As Range 'Current cell in range
' Establish range of cells in Column A
Set last_structure = Range("A2").End(xlDown)
Set all_structures = Range(Range("A2"), Range(last_structure)) ***
' Loop through each structure in turn
For Each molcell In all_structures
Loop code In here
Next molcell
When I run I get an error message of "Run-time error '1004': Method 'Range' of object '_Global' failed". It does not like the line marked ***.
I am wondering if someone could assist me as I have hit a blank. I have a sumif statement that is working perfectly with identifying one set of criteria, but now I want to return the sum of a range referencing two other range conditions.
View 6 Replies View RelatedI'm trying to figure out how to get sumif to sum for non-blank entries- e.g.
sumif(A1:A5,"not isblank", B1:B5).
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
I am trying to write a macro which highlights all the cells with any reference to other cell. The macro should highlight a cell with formula like = 3 * A25 but not highlight a cell with following formula. = 3 * 0.4535566. 'Hasformula' property is not useful here as it can't distinguish between above examples.
View 3 Replies View RelatedOk so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I need a VB code to open excel files located in a path (fixed path) by providing a part of file name through a input box
for ex: I have some files located in my local drive as below
1. colurgreen.xls
2. colurred.xls
3. colurblue.xls
I need a input box asking for file name and I input "green" or "red" or"blue" and it should open the resp file.
I have a long list of amounts one per day. Sun-Sat repeating. I Total the amounts for each week and place it next to Sun. now i have the total for that billing week.
I need to reference these numbers from a different sheet that only has one row per week. I tried to do ='sheet1'!a2 then next row down ='sheet1'!a9 and ='sheet1'!a16 etc then fill down but when i do it seems to start again and do a3, a10 and a17.
Is there a way I can get it to only use cells with figures in them? IE if cell is empty then move down one else use the amount in cell... or how do I get it to reference 7 cells below each time rather than the next immediate cell.
For example in this formula I typed in WWW as the max:
=SUMPRODUCT(($F$5:$WWW$5>=C2)*1,($F$5:$WWW$5<=C3)*1,ABS($F$6:$WWW$6))
If I try to type in a value higher than WWW it will give me an error. I was just trying to put in an amount that I would never hit within the row.
I need assistance referencing cells in other sheets. I have a summary tab which I would have each refenced sheet listed (named for the activity being billed). In a separate cell in the summary tab, I want to bring back the value of the total amount billed for that activity. The total value is in the same cell of each sheet, as all invoice tabs needing to be referenced are identical in layout.
There is one hitch to this, the sheets referenced have not yet been created (that would be too too easy), and the activity list in the summary sheet has place holder names that will change when the activity being billed is defined (hence prompting the biller to create the sheet to be referenced).
My current worksheet is being built for use in Eve-Online, a game I play. In specific, I am keeping track of profit made by manufacturing different items in the game. I am trying to build it like this:
Column 20 is a list of items, and the next 7 cells to the right of each item contain the mineral requirements for that item. So C20 says Bantam Frigate, C21-C28 will all contain numbers. Now, I am trying to create a function in the upper-right cells (like A1-A8) where if I type in "Bantam Frigate" into A1, A2-A8 will fetch the numbers that I put into C21-C28.
Now, I will be working with thousands of items, so I have to make sure I name both the 'database' and the query exactly right, but that's not a problem to me. Can I make something that will reference a value from (cell+1 column right) or (cell+2 columns right)
I have a row of cells on one "Sheet1." I am trying reference these cells into a column on "Sheet2." I know I can reference one cell at a time, but I have a large number of cells in the row on Sheet1 and I know that there has to be an easier way to do it, I am just not excel-savvy enough to know what it is.
I know you can copy and "paste special" (transpose), I am just wondering how to do that while referencing. I have heard that the "offset" function can be used, but after extensive trial and error, I haven't figured it out.
I have set up a spreadsheet in order to track and calculate the number of students we teach at our organization. It is running prohibitively slow when entering new data. On one sheet each individual session is entered (the school, program, date, number of hours etc.) This is the Session worksheet.
On the next sheet(the Program worksheet) the maximum number of students for each unique program (this is usually a combination of school and the program) is calculated to ensure we are not counting students we teach weekly as new students. This is calculated using a formula:
:{=MAX(IF(Session!G:G=Program!A2,Session!D:D))}.
"Session!G:G" = the unique program name on the Session worksheet.
"Program!A2" = the unique program name on the Program worksheet.
"Session!D:D" = the number of students in that individual session...........
Should I use the 'IF' or 'LOOKUP' functions to fill a cell based on the content of another?
If C2 contains 'Cork' I need D2 to read 'Munster'. Indeed I will need D2 to read 'Munster' for a number of different C2 values.
I currently have 3 sheets 1, 2,and 3.
Data is input onto sheet 1, this is copied into sheets 2, no real problem there. However i need to enter data onto sheet 3 and if that data appears on sheet 2 i want the line, not just the cell to be coloured on sheet 2. The data on sheet 3 will not be in any specific order in the column
I have tried conditional formatting but keep getting a message to say it cant be done and offering a formula which i dont understand.
I'm trying to simply reference a cell from another tab in the same workbook. In other words I press "=" and then point to the cell in another tab and I would expect to see that value - however I don't. What I see, as an example, is: ='Nav&SPDiary'!B24 instead of the cell value (which I know exists because I've just pointed to it.
Anyone have ANY idea why all of a sudden it's started to do this? The most annoying thing is it worked fine before and now it doesn't do what I want...
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View Related