Sumif Referencing Range Based On Choice From Dropdown?
Mar 8, 2014
I have several different named ranges that I want to sum and the user chooses the range from a drop down box. I want to select the range based on that choice but when I reference the cell that contains the reference to the selected range I get a result ** 0, but no error. I realize I could use several nested "If" statements but I was looking for a more streamlined approach.
here is the formula:
=SUMIF(Regions,B4,worksheet!K13) K13 = the name ** the selected range.
if I put the name ** the range directly into the formula I get the correct result.
I am trying to build a report where I can chart data base on a dropdown selection.I did build the dropdown lists, however I don't have any expertise on execel functions in order to make it work.I am attaching my draft report.
Is it possible to update certain rows only based on the choice selected from a dropdown list
I shall explain this scenario
I have attached a small excel sheet called TESTTHEM which i'm testing and learning excel simultaneously. On the attached sheet
If i select a value in B4 as BusinessLogic, it should then lookup for relevent rows in MISC worksheet and copy C5:L5 from MISC worksheet and replace the columns G4:P4
3 work sheets nameWorksheets "InfoData" to save month NameWorksheet "Jan" for JanuaryWorksheet "Feb" for February1 x ComboBox = monthBox 4 x CommandButton = Week1Button,Week2Button,Week3Button,Week4Button --------------- I have Problem opening worksheet from userform. Name of the months are in Combox. So when I select month January from comboBox and click on Week 1 command Button it should open worksheet named "Jan" and Select Cells(2,1) to show Week 1. And Same for week 2, week 3 and week4 but will select different Range or cells. I have attached the screenshot of userform and also the workbook.
Private Sub Week1Button_Click()
For i = 1 To 13
If monthBox.Value = Worksheets("infoData").Cells(i, 1) Then
I have a field with a "YES"/"NO" drop-down box. There are three fields below which have some default formatting (thick purple dot-dot-dash borders). When the drop-down field is "YES", those three fields should change borders to a single thin black bottom border line.
OK... so that's the setup. And I should note here that it does in fact format properly. However, the problem I'm having is that the screen does not update / repaint with the new formatting. The thick purple dot-dot-dash borders remain, for the most part.
If I page down, then page back up, the new formatting appears just fine. When I switch from "YES" to "NO", again, the formatting changes, but the screen does not update/repaint so the only way to see the new formatting is to again... page up and then page down again.
I'm wondering if anyone knows a way to force the screen to repaint/update so that my users will see the new formatting without having to page up/down.
I have a frame (Frame1) on a userform added using Microsoft Forms 2.0 Frame. I have added option buttons to the frame named OptionButton1 thru OptionButton4. I am trying to add code where certain cells are copied and pasted depending on which optbutton is selected. I tried the following code but because the option button is a frame object it doesn't seem to trigger the event.
Private Sub OptionButton1_Click()
'copy level 1 If Me.OptionButton1 = True Then Worksheets("Sheet1").Range("G10:G32").Copy Worksheets("Sheet1").Select Worksheets("Sheet1").Range("C10:C32").Select Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _ xlNone, SkipBlanks:=False, Transpose:=False End If
I have multiple sets of data that i need to reference based on the value in another cell. In this instance I am importing data to Excel from an outside source, this data is not consistent each time I import it and therefore based on the values that are imported I need to reference different cell ranges. Here is an example:
Import Data A B Alex 1 Ben 2 April 2 Harry 3
Data Sets Alex Data Range 1 2 3 Refine Help Token Cover Safe Coin Simple Aware Change
Ben Data Range 1 2 3 Sorry Away Candy Happy Home Soda Mad Neutral Water
My problem is that based on the name in column 1 of the import data I need to reference that data range so I obtain the correct column of Alex's data range with a random chance of any item in the column to be selected. Currently my formula looks like this: =INDEX(CELL("contents",A1),RANDBETWEEN(1,3),B1) and it is returning #VALUE, however when I put the Range Name "ALEX" in in place of the "CELL" formula it works properly the problem is I am not able to put the correct name in for each row.
I am trying to build a complex equation that has multiple parameters filled by several choices from several different dropdown menus.
For instance:
I'm building a set of 5 dropdown menus, that each lead to filling certain boxes with a number created from a formula. I've provided a small sample to explain what I'm trying to do.
My problem is, I'm unsure of how to make it so certain drop down menus affect the information inside of the next. Like, I want to have someone select "Oscar" under the characters, and have the "Lances" list come up in the Weapons column menu. I don't want the Weapons menu to be selectable in any way unless a "Character" has been selected.
How do I get 'SUMIF' to ignore blank cells? sumif(a1:a10,h1,b1:b10) - then fill down
a= ID number h1 = ID number b= cost info
eg 'matt' in 'h' is finding 'matt' in 'a' and reporting on the cost info against that name in 'b', but in the middle of the list a blank is matching a blank and returning a subtotal which is in the cost column. I want to put sumif(a1:a10<>"",h1, b1:b10) but this doesnt work!
I'm new to excel and was trying to make a workbook that will have a drop down list populate based on a user input in two separate cells. Basically, i have columns: name, pages, and books. I would like to have the drop down list match data by first finding the amount of books read, then finding the amount of pages read. Then any name that meets the criteria will be available in the drop down list. How can I do this?
Ok, so I have a sheet with a working drop down list with dates, and depending on the date you choose, certain columns getting hidden and some un hidden. The layout is the same form is repeated 7 times, and which ever date you pick, the corresponding form gets un hidden. My question is, I have a button that will export it to a new sheet with just the values, to be sent to the office. I don't need to send the entire work book and confuse people.
I know how to export, just not using an if then to choose which columns to export.
Im having trouble working out a Quarter to Date number based on a data validation drop down. Basically when I put the dropdown on Jan it should sum Jan Feb Mar. When I put it on May it should some Apr and May. SUMIF wont allow multiple criteria and I was having trouble with a sumproduct. Attached is a sheet that shows what I am trying to do.
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
I am hoping to have, on another sheet, a series of dependent drop boxes- Year, Quarter, Month, SKU- which after selecting then displays 'dataA' & 'dataB'.
So you could select- List 1: 2013 ----> List 2: Q1 ----> List 3: Jan ----> SD-21.................and then 13% and 0.05% are displayed.
The data will be continuously added to and so needs to be based on a dynamic data range.
I know that a pivot table is the perfect way to do this, however my bosses have requested that I do not use that format so it is easy for all staff to access.
So I think I need to construct some sort of dashboard sheet, I have experimented with OFFSET from other posts, but so far have had no joy.
I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.
Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.
I have a dropdown list (it is tied to a sumif function and it works perfectly) but I also have some images and when a different selection from the dropdown list is selected I want the images to change. Is this possible using sumif or is it possible at all?
First sheet has a client name and several cells of data along the same line. All of the data on this sheet is kept long term.
The second sheet is completed copied and deleted. In completing the second sheet the client name is selected of a drop down list and pulled from sheet one.
What I want to do and not sure if there is a way is that when I select a client and populate it on sheet two I would like the related data on that clients line from sheet one to populate to same named lines on sheet two.
if this is possible and if so provide a brief description of how it would work
I currently have a drop down menu in one of my worksheets, in which I have several different text values entered. What I would like to do is link each of those text values to a numerical value, which would be entered in to another cell. So if I select "Option A" from my drop down list, and Option A is equal to 200, I want "200" to show up in another cell. If I select "Option B" from my drop down list, and Option B is equal to 400, I want "400 to show up in that same other cell.
I have a worksheet that has 8 activex listboxes. Each listbox is tied to the sames list of values (identified as a named range). The named range is a list of countries. Each country should only be selected once, therefore, I would like the selected country(ies) to not show up as a choice when the user makes a selection from another listbox. If this is too hard, maybe we can get a msgbx to appear anytime the users tries to select a country that has already been selected.
I have two different modules in my automation - to be specific one module to convert file from LH to RH and another module to do the reverse - convert RH to LH.
I have put up a radio button choice for the user and based on which radio button is selected would like to run that particular module.
Below is my code. It always throws an error "expected variable or function not module"
VB: Option Explicit Public Sub MAIN() If ThisWorkbook.Worksheets("FRONT").OptionButton1.Value = True Then Call LH_to_RH
[Code]....
I am following the correct procedure to call modules. A few minutes of search said the modules have to be public sub routines
What I want to do is lets say in the drop down menu I have options Food, sports, Movies. now if I select Sports then it should give me a sub caterory options like baseball, hockey, football and not the options for food & movies as well - so as to make the choices lesser and more user friendly. How do I create that - is it too tough - I am a novice in excel. Can you upload an example sheet with tips on how you did it. I have uploaded an example.
I'm looking to set up a combo box with different year options and add functionality so the data that can be seen on the sheet at a given time is driven by the combo box year value. (functionality somewhat like a webpage, where once you choose a certain value from a drop down box, you see data corresponding to the value)
I'm using a ComboBox ,ComboBox2_Change(), to Call and run 1 of 4 different macros. It works fine if I choose a different item in the list each time, but if I choose the same one, it won't run the macro a second time.