I'm looking to total a range of cells ONLY if they have a value of 0 or more
entered in them. In plain english:
Sumif A1 is >=0
Sumif A2 is >=0
Sumif A3 is >=0
and so on. Where every cell in the range must have a value of 0 or more
entered before the function will return a result.
I am trying to do sumif on below
A B C Total that I need to achieve
-520 Check [blank] -520
-321 Check -321 0
Criteria
Sumif B2 have "Check" add A2 then -C2Problem is C2 although shows no value, there is formula that returns Blank Value. See attached file.
How do I get 'SUMIF' to ignore blank cells? sumif(a1:a10,h1,b1:b10) - then fill down
a= ID number
h1 = ID number
b= cost info
eg 'matt' in 'h' is finding 'matt' in 'a' and reporting on the cost info against that name in 'b', but in the middle of the list a blank is matching a blank and returning a subtotal which is in the cost column. I want to put sumif(a1:a10<>"",h1, b1:b10) but this doesnt work!
I am wondering if someone could assist me as I have hit a blank. I have a sumif statement that is working perfectly with identifying one set of criteria, but now I want to return the sum of a range referencing two other range conditions.
View 6 Replies View RelatedI'm trying to figure out how to get sumif to sum for non-blank entries- e.g.
sumif(A1:A5,"not isblank", B1:B5).
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
I'm looking for a function (I'm thinking 'SUMIF') that will search through column A of Sheet 1 and add column B of Sheet 1 when the cell in column A contains one of the strings listed in column A of Sheet 2. I can only find information when searching for single strings or cells.
View 8 Replies View RelatedI want to use the SumIf function to sum cells when other cells begin with certain characters.
I've toyed with a few ideas of how this could work, but i don't know how to specify that the cells need to begin with certain characters. The cells that would be the criteria and the ones that would be summed come out of an Oracle database (and i have no control over the way they're pulled out - yet) so the beginning characters are connected to extremely unique information, so i dont want that to be included in the if part, for obvious reasons.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
I have a spreadsheet with data in 7 columns. Columns A-d have one line of data in them but the other 3 columns have more than one line.
How do I write a macro which will copy the first row of the first 4 columns down until I reach an empty row?
I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
View 6 Replies View Relatedi am using "sumif" formula in cell C5 and C10, the next step is to add up these two cells (sum up the figures of "sumif"), then the answer will be +15+6=21, how to do with using single formula.
View 7 Replies View RelatedI'm am trying to combine columns B and C in such a way that the result will appear as B: C when C is populated and B alone when C is not populated. I've tried a variety of functions, and I'm unable to get the result I want. This is my most recent attempt:
=IF(C2=ISBLANK, B2, B2&": "&C2)
I have the following formula and it works.
=SUM(IF(AND((Transfers!B6="Labour"),(Transfers!C6="In")),Transfers!G6,""))
Basically the sheet 'transfers' has a column named type and one named in/out, the current formula I have does a logical test on both of these and then if they are both true takes the cost of it from a column named cost. This works fine for single rows. However on another sheet I am trying to use the above formula but there will sometimes be more than one entry for the same date on the sheet 'transfers' and all the same dates that meet the logical test's conditions need to display the sum of the cost on this other sheet.
I'm trying to sum a varying range of cells based on conditions in another column. right now im trying =SUMIF(B:B, "Active", C4:C10)
The number it is returning is not correct and I'm not sure whats wrong. Also, is there a way to allow the range of cells to vary? Like if I wanted to insert a row and have it included in the sum.
That is, if I have a range A1:B1 where some cells contain numbers and others are blank, and I want to add just the cells directly to the right of the filled ones, can SUMIF
View 9 Replies View RelatedI have the data below, there is alot more but I'll just be specific and i'll expand it myself to include the rest that I need.
I want to do sumif if in Column A that is between range R10 and R99, but I cannot figure out how to get the formula to work right since I have text instead of numbers. Also some of the other sumif's i need to do have only letters (for ex. RAA to RAZ or RDA to RDZ).
...
R1021
R1417
R1519
R187
R20131
R249
R2514
R2811
...
I'm trying to figure out how to write a sumif formula that will do a sumif on a column of cells and only sum those that aren't struckout. Additionally, I need to evaluate the cells using a 2nd column where the value in that column equals 1. I can't mess with the formula in the 2nd column and I can't add another column for evaluation for the strikeout (I've got a UDF to check for the strikeout) due to some legacy code that tests for the last column ans the column count and I won't mess with this (no comments, no discernable logic). Basically, I need to bable to evaluate the data in place and using one other column.
View 9 Replies View RelatedI have a worksheet that is utilizing a VLookup to pull some values from another worksheet based on a composite number. I have checked the numbers for their format, length, and value (dangling spaces, etc.). I still cannot get this VLOOKUP to work correctly. I have attached the file.
Column H on the Cost Report sheet holds the formula in question. It concatenates the values in Columns C,D,E,&F to create a composite number to look for in Column B of the Original Estimate sheet. It is supposed to pull the $ value from Column D of that range.
I have tried everything. I passed the composite number into TEXT, --(Double Unary), INT, tested for both #'s length with LEN and have converted the formatting between text and numbers.
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI need to change cells to reflect new costs. Then have these costs roll into new totals. I attached a worksheet to demonstrate how it works. The numbers in gray should be adjustable. The numbers in tan are summing up incorrectly with my "SUMIF" formula.
View 2 Replies View RelatedHow would I write a sumif function to only add consecutive cells that match the criteria? Here is the formula I am using right now, but it adds all of the cells that match the criteria, not just the consecutive ones. Also they need to be consecutive cells from the current cell (in the formula below i would be referring to A80)
=IF(A81<>A80,SUMIF(A$5:A80,A80,H$5:H80),"")
More data:
Column A is a group of dates, but not in order, they are slightly mixed up
Column H is a monetary value.