I have the following formula that is not working:
=(K72*0.2)+(N72*0.35)+(O72*0.25)+(P72*0.2)
It displays #VALUE! instead of the weighted sum I want. The reason for this is some of the cells are blank. If cells O72 and P72 are blank, how would I get it to sum just K72 and N72?
Other rows might have different missing cells, so the formula would have to work for different combinations of missing cells, but the weights will stay the same.
I'm trying to add cells that aren't in a range.
=AA60+AA41+AA22+AA3
Some of those cells are blank and I'm getting an error.
I want excel to treat those blank cells as zeros.
I have a spreadsheet of clients' body weights each week which goes in a column and to the right of it I have a "diff" which I want to show weight gain/loss.
So for a client with weigh-ins the week of 10/1, 10/8, and 10/15 the columns will be:
10/1(V1)--Diff(W1)--10/8(X1)--Diff(Y1)--10/15(Z1)...and so on.
If I have weigh-ins for each week, no problem. I would just have to: =SUM(X1-V1) to get the change in weight from the week of 10/1 to 10/8. Say the client weighed 200 on 10/1 (V2) and 195 on 10/8 (X2), the difference (or "diff" (Y2)) would be -5.
But let's say the client didn't weigh-in on 10/1. The difference in weight is going to be 195. Or if they weighed-in on 10/1 but didn't on 10/8 it's going to read -200.
So I have two cells (say V2 & X2) that if one of them is blank, I want the "diff" to read "N/A" or at least leave the cell blank.
I need to sum cells that contain this formula: =if($c$5=0,"",c5*b5). I am getting a wrong data type value error.
View 7 Replies View RelatedIn my financial modelling I often have a calculated number of months of inventory. This number varies. I need to use this number to calculate the actual inventory value. For eg. it may be 3.2 months of inventory; in this case I need to sum 3 cells (current month, current month -1, current month -2) plus 0.2 of the fourth cell (current month -3)
But I may need to change the number of months of inventory to, for example, 4.2. In this case I would need the sum of four cells plus 0.2 of the fifth cell etc etc.
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I am working on a sheet which calculates payroll. I have a list of people in column A, and in column B, i have their different professionnal status. Their wages vary according to their professionnal status and are in another column C. How can i sum up the wages of only certain people, based on their common professionnal status in column B?
View 3 Replies View RelatedI am trying to sum up a list of cells that have formulas attached so if there is no number in the formula it shows up as #N/A how do I make it so wherever there is an #N/A it equals 0?
View 9 Replies View RelatedI am attempting to use the if function that looks at a cell to see if it is a certain value and if so it adds the value of the cell above with another cell.
Here is the formula in cell AH26: =IF(G26=Variables!$F$4,AH25+AF26,AH25)
the problem is if the G25 did not equal Variables!F4 then AH25 is basically zero or the formula so when cell G26 does equal Variables!F4 then AH26 is supposed to sum AH25 with AF26 but AH25 cell's contents are a formula. How do I get it to ignore the formula and add AF26 with zero instead of the formula?
I am working on a sum formula for a column and I only want to sum if the value is a multiple of 15 or likewise if the value divided by 15 is an integer. I know that I could use several sumif statements to accomplish this, but there isn't really a maximum value. Is there a simpler way to accomplish this? I am comfortable enough with VBA so that is definitely an option as well.
View 4 Replies View RelatedI have concatenated the following cells:
A1, B1, C1
The data in each cell is:
1, +, 2
I can concatenate them to show "1+2".
My question is, can I then perform the calculation that the concatenation produces?
I would like to be able to enter different operators into B1 in order to carry out different calculations.
I'm using the following code to filter a particular range(it works perfectly fine). However I need to SUM Column 'L' once the data has be filtered. and place the result in the LASTS populated cell in Column L. At the moment I am selecting all the data in the column even the data that has been filtered out.
Sheets("Sheet1").Select
Rows("1:1").Select
Selection.AutoFilter
Selection.AutoFilter Field:=7, Criteria1:=">16", Operator:=xlAnd
I want to sum two cells, doesn't sound that difficult but I want to be able to change one of the cells over time. Hence, if B1 is the total sum cell, and A1 is what I fill in. B1 starts at 0, and if I fill something in in A1, B1 will sum itself and A1 (Unfortunately this gives me a circular reference).
So what I'm looking for is some way to use paste special automatically in the formula B1 I guess.
It is possible and how?
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
I have attached the file, in the last sheet (Consolidated) i need to get the data from all the previous sheets, my problem is that whenever i have similar cells the data that is showing is only the first value and not the sum of all values,
View 1 Replies View RelatedI often look at utility data (start date, end date, use, and cost) and have a large list with up to several years worth of monthly data. I am trying to write a formula that will automatically sum the last 12 entries of "use" no matter the amount of lines; be it 12 or 112.
View 2 Replies View RelatedI've got a table with columns for each day of the month, the second row contains the days of the week (MON, TUE, WED, etc...). I want to have two cells at the end of each line, one for summing the numbers in the working days (mon-fri) and another - for the sum of the numbers in the weekend cells.
The idea is the change the content of the second row every month so that the days of the week correspond with the respective date.
what formulas should I employ to accomplish this task and how exactly to do that?
I have cell A1:A25. each with a number, and the same text "Hour(s)" So cell A1 would be 24 Hour(s) and so forth down to cell A25.
Due to the sheet being large, I can't just insert another column to list the text. I need for cell A26 to sum the numbers ignoring the test in the cells. I searched to forum, but didn't exactly find anything that works correct.
I do my indoor cricket team stats and I am having some trouble figuring out what formula to use in order to be able to sum a row of numbers where some cells may contain text and numbers or just text.
Please see the attached spreadsheet to understand what I'm talking about.
In the batting tab, when the batter gets out, they lose 5 runs. Outs are noted by St, R, B or C. In terms of runs, the scorers put wides and noballs to the batter on strike which are noted by W or N and this is worth 2 runs. Sometimes the batter on strike will get runs off a W or N so it's noted down as W+2 (which would give 4 runs) etc. So what I need to be able to do in the batting sheet is sum the total runs and count the number of outs.
In the bowling sheet, it's the same story as the batting tab, but I also need to be able to sum the number of extras given and count the number of wickets taken.
[URL].....
Lets say I have values in A1, A3 and A5 and I want to to build either a sumif or an sum if array formula to conditionally sum them. How do I do this, assuming I don't want to use VBA or named ranges, i.e. create an array of noncontiguous cells and evalute & sum them.
View 9 Replies View RelatedI am trying to SUM a range of cells R9:R39, but I only want the cells added that are greater than 0 (zero) and also I don't want the Sub totals included in that sum.
Column R
-507,784
-507,784 Sub
-25,292
-28,700
32,461
-26,632
158,586
0...............................
I was trying to sum/average last values in a range. If the range is updated, it should sum/average the last 5.
Tried to do it myself but succeded to do my head in only.
My problem is that when i used the forumla = SUM(Q11:AW11) to add up the range of cells it dosnt do it. It only added up 2 of the numbers in the range of cells. And missed out everything else. This forumla is being used to add up all the volunteer hours for volunteers for each month and for all the other months the formula worked fine but now its just being a pain.
View 8 Replies View RelatedI have to work on a sheet where the value in the cells is from a call to the GETPIVOTDATA() function. This may return #REF depending on the data. I need to sum a range of such cells treating a #REF value as zero. In another part of this sheet this is done by {=SUM(IF(ISERROR(D6:D17),0,D6:D17))} but as soon as I go to edit the formula the {} disappear and the formula wont work if I edit it. Putting the {} back in manually doesn't work either. How can I repeat what has been done before. (The sheet was originally created by consultants who have long gone and I have inherited it!)
View 2 Replies View Related