Summing Up Excel Results In Lookup Formulas?
Jul 25, 2012
My task is to sum up data in a worksheet which counts on the number of "working days"(Exclude Sat, Sun and Public Holiday) between "the date of receiving the case" and "the date of completion" of the same case.
So here I have already listed out the days of each month to distinguish "Working Days" and "Non-working days" by "1" and "0" respectively for the easy calculation of the no. of working days as I think.
like this(January):
Date
Results (Exclude holidays)
1/1/12
[Code].....
Then, I use the lookup formula to determine the receiving date (beginning) and the submission day (Ending) sucessfully.
Receiving date
completion date
Receiving date
completion date
1/3/2012
1/8/2012
1
0
Here comes the problem, I want to sum up the range of cell from the result of 1/3/2012 to 1/8/2012, i.e. (1+1+1+1+0+0)=4 to get the total no. of processing days of each case. I tried to use INDIRECT like "=SUM(INDIRECT(VLOOKUP(F5, A2:A226, B2:B226)):INDIRECT(VLOOKUP(G5, A2:A226, B2:B226)))" but it returns me #REF!
View 3 Replies
ADVERTISEMENT
Oct 5, 2013
How to sum numbers from multiple columns that match certain criteria.
My spreadsheet is a funeral team tracker and it's only the 1st day of the month, Each corresponding day will eventually have it's own tab once I nail down this first one.
Basically the page is laid out into 6 different details a team member can do. A team member gets their hours from the "Total Detail Time," that gets calculated from the show time til the return time. The team who worked the detail gets added to the bottom of the Detail they worked. I am just trying to total the "total detail time" each time a member works it. So, a member could work say Detail 1 and Detail 3, so I would just want to sum the total detail time from those two days where the member is shown.
I was trying to use =SUM(IF((Detail1,N13,B10)+(Detail2,N13,D10)+...
Note: I have range names for each bottom portion of the details to shorten the formula (i.e., Detail1, Detail2, etc.)
[URL] ...........
View 5 Replies
View Related
Feb 8, 2007
A friend of mine asked if there is a formula that will add the "Y"'s and "N"'s based off of a filter per certain dates. Below is a brief example.
2/18/2009Y
8/15/2006N
2/18/2009Y
8/15/2006N
4/6/2005 N
4/6/2005 N
We want to be able to sort by dates so regardless of which date we pick, below the Y's and N's will be the total for the Y's and N's that are visible. If sorted by April, it will show 2 N's and 0 Y's, and so on. Is there any formula out there that can do this.
View 3 Replies
View Related
Oct 24, 2011
Is there a way to SUM the result of the followig for B4:J4 and B16:J16, the other cell references remain static:
=(B28*(P28^2-IF(ISNUMBER(B16),ABS(B4-B16)^2,B31)))
I a currently using the following which is rather lengthy and not efficient to maintain/edit:
=(B28*(P28^2-ABS(B4-B16)^2))+(B28*(P28^2-ABS(C4-C16)^2))+
(B28*(P28^2-ABS(D4-D16)^2))+(B28*(P28^2-ABS(E4-E16)^2))+
(B28*(P28^2-ABS(F4-F16)^2))+(B28*(P28^2-ABS(G4-G16)^2))+
(B28*(P28^2-ABS(H4-H16)^2))+(B28*(P28^2-ABS(I4-I16)^2))+
(B28*(P28^2-ABS(J4-J16)^2))
View 2 Replies
View Related
Sep 17, 2009
I am trying to create a formula that will count the number of entries that contain either a name of 'A', 'B' or 'C' and fall within a set date parameter.
I am currently using this formula (which works perfectly well for 1 variable but not for multiple), where column B is my date and column R is my name field.
=COUNTIFS(Extract!B:B,"
View 9 Replies
View Related
Apr 1, 2007
How do you sum data from several cells that derive there answer from a lookup formula that is base on a selection from a drop down menu in another cell. The 6 drop down cells have the same ten items to choose from. Once those items have been chosen I am trying to summarize those six cells to ge a total for each of the item chosen.
View 9 Replies
View Related
Dec 10, 2013
I am having trouble with formula to calculate daily results.I can only calculate results base on daily plan.
please follow this link [URL] .....
Part A
2/12
3/12
4/12
5/12
6/12
plan
0
0
50
50
0
[Code] .....
View 5 Replies
View Related
Sep 20, 2008
In sheet 2 of my workbook I have a whole bunch of formulas that process data from a timeseries in sheet 1. What I want to do is to make a macro that will export the results of some formulas into a list in sheet 3, so that I can keep this info as I move on to the next time series.
Export the result of cell D15 in sheet 2 to cell B3 in sheet 3. But if B3 already contains information from another time series I want the info from D15 to go to cell B4 and so forth.
View 10 Replies
View Related
Feb 11, 2013
IF(A1=1400,(AVERAGE(A1:A2)),"")
Placed in column B.
This formula will do what I want, but 1400 may show up 5 times in 20,000 rows. You can change them to values and delete the blanks to move them up where you can see them.
1. That is more time.
2. This is living data changing all the time, so I need the formulas to remain.
Is there a formula that will place each event under the previous in the column B? The first event in B1, second B2, third B3, and etc.
View 9 Replies
View Related
Dec 23, 2013
I am building a sheet that facilitates managers at our company decipher information that is given to them on a daily workbook I created.
I want to have a drop down menu in Col J, that refers to the major questions they will ask.
Time started (Before)
Time Finished (After)
Number of Cards (More than)
Stops Per hour (more than)
Amount of Time Taken (More Than)
I have set up in Col (K) a secondary drop-down list which based on the question selected in (J) will offer options for the answer E.G Time questions will make (K) refer to options based on time and selections based on amounts will offer numbers as an answer.
The elements in brackets are the parts of the formula that create the search option. E.G If select 'Time Started' it will search for all records that started before the time selected in the next col (K)
Right if that makes sense.. I have completed this. so I have the following: A question drop down list in (J), and an answer drop down in (K) which is dependant on the type of question asked. (I have attached an example)
I want to now have a totals box after the question where it displays a total amount of cols that are true to the details in the question.
After that (if possible) I will want to use conditional formatting to highlight the ones that reflect to the question.
Realistically if possible i wouldnt mind creating a question box, a box that allows them to select 'more than', 'exact' or 'less than' and then the specific value. Basically a conditional formatting box for dummies within the worksheet. Attached is a demonstration.
View 5 Replies
View Related
Jul 16, 2012
how to return the top 5 results in a set of data.
In a nutshell, I have data that needs to be sorted but some intermediate to advanced (to me) excel formula needs to be used to sort the ranking properly. I've already used index, match and large but it does not suffice.
View 1 Replies
View Related
Aug 30, 2007
I have a sheet with Product IDs and amounts. A Product ID may occur more than once. I want to sum all amounts for all occurrences of each Product ID.
(see attached file)
I have written the following code, but as you can see, it is returning an error, so I've done something wrong. I'm also getting a Compile error: "For Each control variable must be Variant or Object"
Function GetTotal(PO_ProdID As Range, LURng As Range)
'
' Function to Lookup Concatenated PO # & ProdID
' & Return the Total of all dollar amount listed
'
Dim ce As String, tot As Long
tot = 0
For Each ce In LURng
tot = tot + ce.Offset(0, 1).Value + ce.Offset(0, 2).Value
Next ce
End Function
View 4 Replies
View Related
Mar 14, 2014
I have a workbook that I use to calculate sales by agents. In the workbook I have the following sheets:
Monthly_Report - Where the results are return to the from end user
team_ref_sheet - Where team / manager details are added / updated
data_sheet - Where my raw data is added
On my team_ref_sheet I have created 4 columns that have been renamed using name manager as follows:
team_manager
agent_names
dealer_code
employee_number
On my "Monthly_Report" sheet I have created a table where I want m data to be displayed to the front end user. The table starts in column C8.
In column D10 through to all the other rows I would like my sheet to reference to my "team_ref_sheet" and return all agent names in the range, up until it reaches a blank row.
View 9 Replies
View Related
Oct 29, 2009
After a lot of searching and trying I still didn't get to something that works.
My situation:
sheet1
column A column B
true "abc"
true "bcd"
false "cde"
true "def"
false "efg"
false "fgh"
on sheet2, in cell A1, I would like to get all results from column B that correspond 'TRUE' in that row.
So, in cell A1 on sheet2, i would like to see "abc", "bcd", "def".
VLOOKUP returns only one result, of course. How do I solve this?
I'm not good at VB, so preferably only with formulas!
View 9 Replies
View Related
Dec 30, 2006
I have a series of daily data in columns sorted by date (see attached .xls).
I am trying to create a table that extracts the value on the last day of a given month, and of the first day of that month, for each of the months in the data series.
I have been trying to get lookups and match functions to work but to no avail.
View 4 Replies
View Related
Aug 29, 2007
I'm trying to use this function which was posted as an answer (looking up a single value and returning multiple results, concatenating those results in one cell):
Function getfiles(DRng As Range, LURng As Range)
For Each ce In LURng
If ce.Value = DRng Then
holder = holder & ce.Offset(0, 1).Value & ", "
End If
Next ce
getfiles = Left(holder, Len(holder) - 2)
End Function
What is "ce" here? Auto Merged Post;additional info:
the original question was posted by jwhite68, Feb 27th 2007, "Return Multiple Values From Lookup To Single Cell"
View 9 Replies
View Related
Sep 8, 2007
i have this file that has about 12000 rows of numbers (a individual number can appear more than one). i'm trying to use a lookup to find if that number appears and if it does then bring back the amount next to the number.. however because the vlookup sees that the number more than one in the list it will bring back #N/A every time. Is there a way to get around this??
View 4 Replies
View Related
Jan 10, 2013
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies
View Related
Mar 31, 2014
I want to look up a particular value and return according results horizontally and vertically. Attached is the excel.
View 10 Replies
View Related
May 4, 2014
I have been using this formula to do lookup and return values
"=INDEX(ResultsColumn,SMALL(INDEX((CriteriaColumn=Criteria)*(ROW(CriteriaColumn)-ROW(FirstCellOfCriteriaColumn)+1),),COUNTIF(CriteriaColumn,"<>"&Criteria)+ROWS(A$1:A1)))"
I'm using this formula in a roster scene to pick up people that call in sick and display their restored job in a different cell. The problem that I am having say for example employee one calls in sick at 2 pm and i assign that job in a corresponding cell to another, then employee 2 calls in sick for the 1pm shift (the call was made after i have already restored employee one a replacement), the formula automatically places the 1 pm in the cell above the 2pm.
Is there a way to stop it from changing the value once a value is entered in a corresponding cell?
Link to the original formula thread. [URL] ........
View 10 Replies
View Related
Jan 15, 2009
I am trying to do a two way lookup with multlple results. In the example attached I want to know the names of the people who were in Boston on 01/02/09. I have tried a number of index, match formulas to no avail.....
View 3 Replies
View Related
Jan 28, 2009
I have been searching all day about this topic and while there are many "solutions" none of them fits my criteria and I can't figure out how to tailor it.
I am using a very basic data sheet to populate a purchase order. I want to be able to search a style and have all the data (color, units and price) automatically fill in upon entering the style number, I have been using vlookup but this only works if there is one color per style.
I have found different lookup functions that give the value +1 when the data is sorted but it returns the value even if it doens't fit the search criteria, I only want to return the second value if it correlates to the initial lookup
View 5 Replies
View Related
Jul 31, 2007
It highlights (with an x) all data that appears in both sheets a and sheet b. However I want it to highlight all the ones that are no on sheetA.
View 10 Replies
View Related
Dec 11, 2008
I have a lookup that needs to average multiple results for the lookup... columns
Q to W
Looks like it is only returning the first found value.
View 3 Replies
View Related
Mar 27, 2009
I am trying to find a function that will scan down a column to find a particular criteria. I would like all the cells that meet this criteria to have their entire row pulled through to a new sheet.
For Example, In the attached spreadsheet, I would like everyone in sheet 1 to have their details pulled through to sheet 2 if they are in class 1, sheet 3 if they are in class 2, and sheet 4 if they are in class 3.
View 2 Replies
View Related
Oct 25, 2013
I have a cell that I must remove the first 2 characters "RO" for each value in a column on a sheet called RAW DATA and put into a cell on a sheet called ROSS DATA. Some of the values in that cell have 3 digits after the RO and some have 5 digits. To do that I used
=REPLACE('RAW DATA'!A3,1,2,"")
Then I need to use this new resultant string as the lookup value in a VLOOKUP. The VLOOKUP will be looking at a named range called DAP on a sheet called DAP, in column 5 for an exact match and I need it to return that value to the cell.
I have tried using the indirect to no avail in different ways, and not sure that I fully understand the usage.
View 9 Replies
View Related
Aug 17, 2005
I have some data arranged in columns/rows as follows:
Location Name
--------- ------
United States Sarah Buchannan
United States Walter Smith
France Phil Barney
Italy Anna Wilson
Germany Philip Watson
France Neil Anderson
I want to have some function in my spreadsheet that will neatly present the names of the people at a given location in a separate part of the worksheet
e.g. a display of all people in France would have something like:
France
-------
Phil Barney
Neil Anderson
Ideally I would like to populate cells rows in a different column with the multiple results of the lookup ("persons at a given location") and that change in location for any individual would result in the list of persons at a given location being automatically updated.
Did alot of digging around and managed to construct a UDF that would display the results of the lookup in a single cell - it is however not very readable. But, I found out that a cell based UDF is not allowed to populate other cells other that the one where the function is entered!
View 9 Replies
View Related
May 23, 2007
I would like a formula to do a lookup multiple results but in a sorted matter.
Example: ....
View 9 Replies
View Related
Oct 21, 2008
1st sheet is giving me partial results with a vlookup - only gives me the first match to my ref number.
2nd sheet is the source data and contains refs and one or more matches.
NB: This is just a sample of the data, however in my original excel file with 25000 records there can be one or even up to 10 matches.
What I'd like to achieve;
Sheet One; Column B should give all matches for the ref number found in Column A.
It should merge all these matches to fit one cell so that all matches are sorted one under each other with line breaks.
As there is 25000 records to treat I would rather not have to do anything manually!
Am I asking too much?
I've read on the forum that it's best not to merge but I don't know how to get around the fact that I need all the matches per ref no in one cell to reimport into my database.
View 8 Replies
View Related
Jan 30, 2008
I am using vlookup to return data from a range that could have the same name in column A.
There are 8 columns
Column 1 is Name
Column 2 is Sun
Column 3 is Mon
and so on.
The problem I have is that a name can appear in two places in column1 with relevant information in different columns:
Fred appears twice, on Wed he is on a course the rest of the week he is on leave. I need a C to be returned for Wed & A/l for the rest of the week.
View 9 Replies
View Related
