Finding Results Not In A Table Lookup
Jul 31, 2007It highlights (with an x) all data that appears in both sheets a and sheet b. However I want it to highlight all the ones that are no on sheetA.
View 10 Replies
ADVERTISEMENT
Lookup Formula Finding Incorrect Results
Nov 3, 2009If I type in an age in A1, in A2 I want an age group to appear
the groups are
20-24
25-29
30-34
35-39
40-44
45-49
50-54
55-59
60-65
so far, if I type in an age then it normally enters the group ABOVE what I want
i.e. if I enter “24” then it put the group “25-29”. if I enter “42” it puts “45-49” and so on.
=LOOKUP($A1,{0,16,20,25,30,35,40,45,50,55,60},{"<16","20-24","25-29","30-34","35-39","40-44","45-49","50-54","55-59","60+"})
Survey Results Table Lookup Errors?
Jun 26, 2014An offset sumproduct series of functions provides me the total score percentage for the top level categories. There are 5-6 in total and can easily be charted in a radar.
The second step is to maintain the 'dynamic aspect' (being able to delete rows) and lookup the high-level category, and the subsection and return the score for the individual question. This way I can create a chart for each of the 5 top level categories and show the survey score for each answer in the category. Note each question has a maximum score of 5 and are scored 1-5.
I have a few errors looking up values and percentages coming back as 500% with the addition of new columns (in red in attached). The first sheet is error free, the second sheet is the 'build'.
Note: Charts will be housed on a separate sheet.
Finding A Name In Worksheets And Averaging Results
Feb 20, 2010Using 2003...
NameAverageLowHighAveFirstsSecondsThirds1Fuller2Krause3Huttenburg4Minter
I'm struggling to find 3 formulas/solutions for the table above:
1) I'm looking for a way to find the people's names from column B in all 10 worksheets on the doc. and average the values associated to that name. These values are found in column D on each of the worksheets.
2) I would also like to be able to find the lowest and highest values that are entered in column D from the 10 worksheets for each person.
3) I would like to count the number of 1's for each person in column F from the 10 worksheets. I would do the same for the number of 2's and 3's, as you can see from the table above.
Apply A Filter In A Pivot Table And Extract Results In A Table
Jul 24, 2008I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
View 9 Replies View RelatedPopulate Cell Using Two Results From Same Table And Referring To Another Table?
May 23, 2013I have a workbook with two worksheets,
sheet 1 contains student data, name dob, actual age, raw score and an empty column standardized score
sheet 2 contains a conversion table, using the actual age from sheet one you locate the age in the top row of table in sheet 2, and using the raw score from sheet 1 you locate the matching raw score from the first column of the table in sheet 2, going down and acrosss until you meet this gives you a standardised score
i want the standardized column in sheet one to fill by using a formula which looks at the table in sheet two locates the two values and returns the result.
Data Table: Incorrect Results Inside Table
Feb 22, 2007I did a data table yesterday and it worked. I tried again today and the results are incorrect. They are coming out as a constant (the same result as the original formula). Has anyone had this happen before and figured out how to fix? My spreadsheet is fairly complex. Does the data table formula need to refer to the "base" cells? For example, if the formula refers to cell F15, but in F15 the formula is +C15, does my data table formula need to use C15?
View 3 Replies View RelatedSum All Results Of Lookup
Aug 30, 2007I have a sheet with Product IDs and amounts. A Product ID may occur more than once. I want to sum all amounts for all occurrences of each Product ID.
(see attached file)
I have written the following code, but as you can see, it is returning an error, so I've done something wrong. I'm also getting a Compile error: "For Each control variable must be Variant or Object"
Function GetTotal(PO_ProdID As Range, LURng As Range)
'
' Function to Lookup Concatenated PO # & ProdID
' & Return the Total of all dollar amount listed
'
Dim ce As String, tot As Long
tot = 0
For Each ce In LURng
tot = tot + ce.Offset(0, 1).Value + ce.Offset(0, 2).Value
Next ce
End Function
Lookup Table (adjust Which Column The Lookup Function Refers To)
Jun 12, 2009I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies View RelatedLookup Results Using Name Manager?
Mar 14, 2014I have a workbook that I use to calculate sales by agents. In the workbook I have the following sheets:
Monthly_Report - Where the results are return to the from end user
team_ref_sheet - Where team / manager details are added / updated
data_sheet - Where my raw data is added
On my team_ref_sheet I have created 4 columns that have been renamed using name manager as follows:
team_manager
agent_names
dealer_code
employee_number
On my "Monthly_Report" sheet I have created a table where I want m data to be displayed to the front end user. The table starts in column C8.
In column D10 through to all the other rows I would like my sheet to reference to my "team_ref_sheet" and return all agent names in the range, up until it reaches a blank row.
Lookup With Multiple Results
Oct 29, 2009After a lot of searching and trying I still didn't get to something that works.
My situation:
sheet1
column A column B
true "abc"
true "bcd"
false "cde"
true "def"
false "efg"
false "fgh"
on sheet2, in cell A1, I would like to get all results from column B that correspond 'TRUE' in that row.
So, in cell A1 on sheet2, i would like to see "abc", "bcd", "def".
VLOOKUP returns only one result, of course. How do I solve this?
I'm not good at VB, so preferably only with formulas!
Lookup Results For 1st & Last Day Of Month
Dec 30, 2006I have a series of daily data in columns sorted by date (see attached .xls).
I am trying to create a table that extracts the value on the last day of a given month, and of the first day of that month, for each of the months in the data series.
I have been trying to get lookups and match functions to work but to no avail.
Concatenated All Results Of Lookup
Aug 29, 2007I'm trying to use this function which was posted as an answer (looking up a single value and returning multiple results, concatenating those results in one cell):
Function getfiles(DRng As Range, LURng As Range)
For Each ce In LURng
If ce.Value = DRng Then
holder = holder & ce.Offset(0, 1).Value & ", "
End If
Next ce
getfiles = Left(holder, Len(holder) - 2)
End Function
What is "ce" here? Auto Merged Post;additional info:
the original question was posted by jwhite68, Feb 27th 2007, "Return Multiple Values From Lookup To Single Cell"
Lookup Number Results In #N/A
Sep 8, 2007i have this file that has about 12000 rows of numbers (a individual number can appear more than one). i'm trying to use a lookup to find if that number appears and if it does then bring back the amount next to the number.. however because the vlookup sees that the number more than one in the list it will bring back #N/A every time. Is there a way to get around this??
View 4 Replies View RelatedFinding Values In Table A And Transfering Them To Table B
Oct 25, 2013I have this list of companies (about 50) in one work sheet. If a certain company has sales or costs it will appear under the company name, as either Products, Installation or Freight. It looks something like this:
Company
Sales
Costs
[Code]....
What formula should I use the find the installation that belongs to that certain company? And not all companies has a line that say installation.
LOOKUP Finding The Zero
Jan 4, 2008I have a LOOKUP formula with MID in it to asign a Letter digit to each numeric in a certain position of a number. Works great (thanks jonmo1) on 9 out of 10 numerics.
see below
=LOOKUP(MID(AF134,4,1)*1,{1,2,3,4,5,6,7,8,9,0},{"V","T","A","P","L","K","H","J","E","C"})
But when that 4th digit is a zero I get #### instead of my C letter that I need.
Lookup And Return Multiple Results
Mar 31, 2014I want to look up a particular value and return according results horizontally and vertically. Attached is the excel.
View 10 Replies View RelatedLookup Value And Return Multiple Results
May 4, 2014I have been using this formula to do lookup and return values
"=INDEX(ResultsColumn,SMALL(INDEX((CriteriaColumn=Criteria)*(ROW(CriteriaColumn)-ROW(FirstCellOfCriteriaColumn)+1),),COUNTIF(CriteriaColumn,"<>"&Criteria)+ROWS(A$1:A1)))"
I'm using this formula in a roster scene to pick up people that call in sick and display their restored job in a different cell. The problem that I am having say for example employee one calls in sick at 2 pm and i assign that job in a corresponding cell to another, then employee 2 calls in sick for the 1pm shift (the call was made after i have already restored employee one a replacement), the formula automatically places the 1 pm in the cell above the 2pm.
Is there a way to stop it from changing the value once a value is entered in a corresponding cell?
Link to the original formula thread. [URL] ........
Two Item Lookup Multiple Results
Jan 15, 2009I am trying to do a two way lookup with multlple results. In the example attached I want to know the names of the people who were in Boston on 01/02/09. I have tried a number of index, match formulas to no avail.....
View 3 Replies View RelatedReturning Multiple Results For One Lookup Value
Jan 28, 2009I have been searching all day about this topic and while there are many "solutions" none of them fits my criteria and I can't figure out how to tailor it.
I am using a very basic data sheet to populate a purchase order. I want to be able to search a style and have all the data (color, units and price) automatically fill in upon entering the style number, I have been using vlookup but this only works if there is one color per style.
I have found different lookup functions that give the value +1 when the data is sorted but it returns the value even if it doens't fit the search criteria, I only want to return the second value if it correlates to the initial lookup
Average Multiple Results For The Lookup
Dec 11, 2008I have a lookup that needs to average multiple results for the lookup... columns
Q to W
Looks like it is only returning the first found value.
Lookup And Pull Results Into New Sheet
Mar 27, 2009I am trying to find a function that will scan down a column to find a particular criteria. I would like all the cells that meet this criteria to have their entire row pulled through to a new sheet.
For Example, In the attached spreadsheet, I would like everyone in sheet 1 to have their details pulled through to sheet 2 if they are in class 1, sheet 3 if they are in class 2, and sheet 4 if they are in class 3.
VLOOKUP Using Results Of Formula As LOOKUP VALUE?
Oct 25, 2013I have a cell that I must remove the first 2 characters "RO" for each value in a column on a sheet called RAW DATA and put into a cell on a sheet called ROSS DATA. Some of the values in that cell have 3 digits after the RO and some have 5 digits. To do that I used
=REPLACE('RAW DATA'!A3,1,2,"")
Then I need to use this new resultant string as the lookup value in a VLOOKUP. The VLOOKUP will be looking at a named range called DAP on a sheet called DAP, in column 5 for an exact match and I need it to return that value to the cell.
I have tried using the indirect to no avail in different ways, and not sure that I fully understand the usage.
Presentation Of Multiple Results Of A Lookup
Aug 17, 2005I have some data arranged in columns/rows as follows:
Location Name
--------- ------
United States Sarah Buchannan
United States Walter Smith
France Phil Barney
Italy Anna Wilson
Germany Philip Watson
France Neil Anderson
I want to have some function in my spreadsheet that will neatly present the names of the people at a given location in a separate part of the worksheet
e.g. a display of all people in France would have something like:
France
-------
Phil Barney
Neil Anderson
Ideally I would like to populate cells rows in a different column with the multiple results of the lookup ("persons at a given location") and that change in location for any individual would result in the list of persons at a given location being automatically updated.
Did alot of digging around and managed to construct a UDF that would display the results of the lookup in a single cell - it is however not very readable. But, I found out that a cell based UDF is not allowed to populate other cells other that the one where the function is entered!
Lookup Multiple Results Sort
May 23, 2007I would like a formula to do a lookup multiple results but in a sorted matter.
Example: ....
Lookup All Occurences & Merge Results
Oct 21, 20081st sheet is giving me partial results with a vlookup - only gives me the first match to my ref number.
2nd sheet is the source data and contains refs and one or more matches.
NB: This is just a sample of the data, however in my original excel file with 25000 records there can be one or even up to 10 matches.
What I'd like to achieve;
Sheet One; Column B should give all matches for the ref number found in Column A.
It should merge all these matches to fit one cell so that all matches are sorted one under each other with line breaks.
As there is 25000 records to treat I would rather not have to do anything manually!
Am I asking too much?
I've read on the forum that it's best not to merge but I don't know how to get around the fact that I need all the matches per ref no in one cell to reimport into my database.
Return Lookup Results Of All Occurences
Jan 30, 2008I am using vlookup to return data from a range that could have the same name in column A.
There are 8 columns
Column 1 is Name
Column 2 is Sun
Column 3 is Mon
and so on.
The problem I have is that a name can appear in two places in column1 with relevant information in different columns:
Fred appears twice, on Wed he is on a course the rest of the week he is on leave. I need a C to be returned for Wed & A/l for the rest of the week.
Finding 2nd Occurence And Lookup Value
Jul 27, 2006How can I find the 2nd occurence of a value in a list and lookup a value in the same row?
My data looks similar to this:
Name.............Order No
Alan...............1234
Bob................4567
Steve.............7890
Alan...............6543
Steve.............0985
etc.
How can I lookup Alan's 2nd Order No.?
List Multiple Results From Lookup On A Different Sheet?
Aug 28, 2013I need to start a list in cell a8 on sheet1. I need it to find and list multiple results vertically. It will lookup what is in cell a1 on sheet1. The table of info is on sheet2 from a1 to b44. Column a on sheet2 has the values of what is in column a on sheet1 and column b is what I need returned to the cell with the formula.
View 3 Replies View RelatedLookup Formula To Return Multiple Results?
Dec 8, 2013I am trying to create a workbook where I can log what work I have done in one spreadsheet and allocate an invoice number to it. In a separate spreadsheet within the same workbook I have created an invoice template. When I enter in the invoice number into the invoice template it's not collecting the correct information.
For example, if I want the details for invoice 10 to show in the invoice template, details for invoice 19 appear.
I have used this formula:
=IFERROR(INDEX(ServiceRecord[[Invoice number]:[Date invoice issued]],
SMALL(IF(ServiceRecord[[Invoice number]:[Date invoice issued]]
='Invoice TEMPLATE'!$F$8,ROW(ServiceRecord[Invoice number])),ROW(1:1)),2),"")
I am wanting to add new information as time goes on and also to be able to put in any invoice number into the invoice template to recall information as needed.
