how to return the top 5 results in a set of data.
In a nutshell, I have data that needs to be sorted but some intermediate to advanced (to me) excel formula needs to be used to sort the ranking properly. I've already used index, match and large but it does not suffice.
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
I have an Excel sheet on which I need to calculate the largest, 2nd largest and 3rd largest volumes from the range of data.
I've done this using an INDEX and MATCH formula to return the Status # for the largest, 2nd and 3rd largest volumes. So the formulas are:
Rank 1
=INDEX(B3:G3,MATCH(MAX(B3:G3),B3:G3,0))
Rank 2
=INDEX(B3:G3,MATCH(LARGE(B3:G3,2),B3:G3,0))
Rank 3
=INDEX(B3:G3,MATCH(LARGE(B3:G3,3),B3:G3,0))
However when the volumes are the same the formula returns the same Status # for both. For example below, for Site 1; Status 3 is ranked 1st and then Status 1 is ranked 2nd, for the 3rd rank, the formula is returning Status 1 again.
Is there any way of changing the formula to return Status 4 as the 3rd ranked instead of returning Status 1 again?
Status 1Status 2Status 3Status 4Status 5Status 6Rank 1Rank 2Rank 3Site 18655802Status 3Status 1Status 1Site 241818691Status 2Status 2Status 5Site 389126220Status 5Status 3Status 2Site 43591872Status 4Status 3Status 5Site 51650015Status 1Status 2Status 2
I've attached my condensed softball team spreadsheet At the bottom, I'm trying to show the stat leaders, and the problem is the ties. For example, batting avg, there are 2 players tied for 2nd at 0.750, how can i have the name column show each of the 2 tied players (Paul and Nathan)? I think this thread shows what i'm trying to do, but i can't adapt it to my spreadsheet.LARGE Function with Numbers and Text
View 2 Replies View RelatedI am looking for the largest TOTAL SCORE in each division, but need to display 3 placings. Current error: If the score is a duplicate, it is repeating that score with the same rider.ALSO - I need to add the 'PLUSES' as part of the tiebreaker (i.e. 940 with 24 pluses would be 1st, 940 with 4 pluses, 2nd...etc)
View 3 Replies View RelatedProblem we are having with sorting a table.
The table (A1:E10) was created by pulling data from another worksheet using INDEX and ARRAY formulas.
We inserted 6 columns to move the table over to G1:K10 (used column F to space the two tables).
We then duplicated the table: cell A1=G1, B1=H1, ...., E1=K1 and dragged the formulas down. We now have a duplicate table that we want to sort.
We choose CUSTOM SORT and choose 2 levels of sorting ... column A and column C.
PROBLEM: The ARRAY formulation evidently overrides the sort function because the table remains as it was when the sorting command is executed.
Is there a way to bring the data from table G1:K10 over to table A1:E10 in a manner that will allow sorting??
I am attempting to use the LARGE formula to pull the top 3-5 percentages out of a field of 50-100, while using the INDEX/MATCH function to pull the corresponding "descriptor" that is associated with those top 3-5 percentages. (I need to do this across multiple data sets, but I can't get past this 'duplicate' issue) However, I am running into the problem when there are 2 percentages that are identical (WH 14 and WH 16 in pasted text below), then the INDEX/MATCH function only pulls the 1st "descriptor" and doesn't continue down to the Duplicate. how to tell excel to move to the next set of duplicate data and match the 'descriptor' to that data?
I have attached a file that should show what I am trying to do. These are the formulas I am using right now, pulled down into the 3 cells below them to get the top 3.
B1:
[Code]....
C1:
[Code]....
Warehouse S/S %
WH 1 50.00%
WH 2 57.14%
WH 3 0.00%
WH 4 50.00%
WH 5 100.00%
WH 6 60.00%
WH 7 33.33%
WH 8 66.67%
WH9 60.00%
WH 10 63.64%
WH 11 78.57%
WH 12 55.56%
WH 13 42.86%
WH 14 71.43%
WH 15 61.54%
WH 16 71.43%
Attached File: Book1.xlsx
I have a table of sales by month per account. Each account has an associated country, but there may be many duplicates of each country per month.
I want to create a formula which indexes the country field and gives me the country with the highest total sum for a specified date range. I'd like to be able to drag the formula down and have the country with the highest sales, then the second highest, and third highest, and so-on. Column ranges are specified below.
K - L - M - N
------------------------------------------------
Month
Year
CtryDsc
Rev
1
2011
[code].....
I was thinking of using an array function utilizing index, large, sumif, and match, but I am getting stuck. I'm honestly not sure if what I'm looking for is even possible, but in Excel, everything is possible, so there has to be a way!
I need a little coaching on big data. I have two reports, one from a production system the other from the invoicing system. I need to reconcile the two reports to ensure our invoicing ties out to production. At this time I am focusing on 1 particular item code, but there are potentially hundreds of item codes.
I have 1 Item Code.
I have a around a hundred invoices. (Sample 100)
I have a few hundred different customers. (Sample 100)
I have several hundred lines of billing data. (Sample 650)
I have several thousand lines of production data. (Sample 40,000)
In the billing system, per invoice I might have 1 or more billing lines for this item, usually no more than 2.
In the production system, per invoice I might have 5 to 50 or more production lines for this item per invoice.
Example
Prod System:
30 lines of data has a run amount and a total run amount for each line.
I am looking for tools to reconcile this data. VLookup and Index/Matching is not cutting it. VLOOKUP does not move beyond the first line found. Index/Matching wants to add all the prod together. I can get subtotals easy enough. I have tried Concatenation, but when it takes multiple production data lines to equal 1 billing line, this does not work. I needs some thing that can look at the Qty on a billing invoice and tie it out to various lines of production data to identify which production jobs went on that line of the invoice.
Here is a sample. These are fairly easy to resolve, but others are not so easy due to number of production and billing rows.
Invoice number
Billing item
Est. Quantity
Actual quantity
Billable Qty
Sales order
Position number
Sequence
Agreement
Billing source
Description
Total Billable Qty
[Code] ..........
In the attached I have an index/match formula in B15 that I cant get to return any results not even a N/A#
Quick Quote Tool.xlsx
I've spent the last week trying to do the following, with little to no success....and I'm running out of hair to pull out!!
I have a worksheet (let's call it DATA) with the following column headers:
* Site Name
* Year Initiated
* Status
plus a whole bunch of other columns of information.
On a separate worksheet (let's call it RESULTS) I'm trying to create a summary of all the Site Names where the Year Initiated = "2004" and the Status = "Active". There will be multiple occurences where this is true.
I then want to create further results where the year = 2005, 2006, etc., etc. I've been trying to use the INDEX function with variations of MATCH, SMALL, ROW, etc., etc., but so far, no luck.
Advanced Filtering is not an option as I need to do further manipulating of the results on the RESULTS worksheet.
Attached is a spreadsheet I am working on. The cells I am having difficulty with are I5 and I6. Cell I5 should be pulling a value from the 2nd tab based on C4 and C5 AND C6. Or at least that is my intent. However when I change C6 to 6 I get an N/A. When it is 5 based on 15,000 it enters $2,353.73 but according to my table it should be $2,710.23 I am having the same issue with I6. Based on 15,000 it should enter $190. Where did I go wrong.
View 2 Replies View RelatedI've been trying to edit my index formula to only count an order number once even if the criteria for that result appear more than once. Attachment 324723
View 7 Replies View RelatedI have a table with Dynamic Headings and Expanding rows, that's setup like below: The formula in the Qty column would produce a "0", if the result of the Index Match has a blank. For example in a different table the reference cell would have "Heading3". Therefore the results in the Qty column would be like example below. The products in the table below are like 0's and 1's to trigger the formula to calculate with the variables, or give a zero. If the Index Match found "Heading2" the results would be based on cells under "Heading2 Column" etc.
x
y
z
[Code]...
Currently i am using index and match in excel but however i am unable to get the result tt I want.. what i need is
Data to check with item master whether all 3 (article, color code and size) matches and if it doesn't match, which of the field is wrong. (eg: wrong color code, wrong size or article don't exist).
[Code] .......
Above is my item master
Data to check
[Code] ........
Example case: 1
Checking first row of data check
Article number: 2-50660147
Color code: 6
Size: M
Result: "Wrong size"
But however, it returns as wrong size as it only reads the first time the article number appear in the item master and does not recognize the second time the article number appears with the correct color and size.
I am building somewhat of a rudimentary search engine that looks for a name, address or unique identifier, using an Index Match formula that searches with a wild card:
=INDEX(Name,MATCH("*"&F3&"*",Name,0))
"Name": is the defined name for column C on a separate sheet.
F3: is "search field"
The current formula (above), only returns the first match. The source data is only 927 lines so not overly large. I would like to have an additional page that will show the potential results from the wildcard search via a formula. Therefore needing results; 2, 3, 4, 5 etc. from the Index Match. I have searched high and low for solutions but I have found none in regards to retrieving multiple results from a wildcard search, only on a specific term.
I attached a file containing two sheets. The first sheet is called Input on this sheet there are several categories of which I displayed the first three on. My ultimate goal is to get the Input per category broken down horizontally over the line-items on the Output sheet. Every category contains several line items to which costs are attached (f.e. in category 10, line item 4000, the costs are 33,000$ and so on).
The problem is that every month the costs are changing per line-item, but also the number of line items per category will change due to the fact that the line-items are only displayed if there are in a specific month costs booked to the line-item. In other words sometimes line-items are added due to costs booked at the line-item, but if in one month there are no costs booked at the line-item it disappears from the overview. A formula containing: '=if(category=10,vlookup(... is to static due to the changing line-items.
I am building a tool for work, and in one of the sections of the main worksheet, I would like the cells to pull specific data from another worksheet that contains the results of a web query. The web query pulls a table of data, with a double header (rows 3 and 4). One column header is for the date and the other is for the time the data below corresponds to. There are also row titles along the left hand side.
I need a formula that will find the column that meets two conditions:
1) Today's date
2) A specific time (referenced from a cell on the main sheet)
It must then pull the data from the cell in that column that is in the row marked "Total".
Here is an example of the data set from the web query:
Excel 2010BCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAFAGAHAIAJAKALAMANAOAPAQARASATA
UAVAWAXAYAZBABBBCBDBEBFBGBHBIBJBKBLBMBNBOBPBQBRBSBT3
Total19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-Nov19-
Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-Nov20-
Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-Nov21-
Nov22-Nov22-Nov22-Nov22-Nov22-Nov22-Nov22-Nov22-
Nov23-Nov23-Nov23-Nov23-Nov23-Nov23-Nov23-Nov23-
[Code]......
I have done quite a bit of looking on the web and tried out several different formulas/variations. I think I'm getting close, but just can't get it quite right. Here are a couple that seem close and their results:
=INDEX('Rodeo Data'!$D$5:$JS$50,MATCH("Total",'Rodeo Data'!$B$5:$B$50,0),MATCH(J3,'Rodeo Data'!$D$4:$JS$4,0)*AND(MATCH(TODAY(),'Rodeo Data'!$D$3:$JS$3,1)))
This one correctly finds the date and "Total" row, but seems to ignore the MATCH(J3,'Rodeo Data'!$D$4:$JS$4,0) section, which is designed to find the specific time in row 4. It returns either the "Total" row value from the first or last column with the correct date depending on which match type argument I use.
=INDEX('Rodeo Data'!$D$5:$JS$50,MATCH("Total",'Rodeo Data'!$B$5:$B$50,0),MATCH(TODAY()&O3,'Rodeo Data'!$D$3:$JS$3&'Rodeo Data'!$D$4:$JS$4,))
This one returns the standard "#N/A" error message.
I am using Windows 7 and Excel 2010. "Rodeo Data" is the name of the sheet that contains the web query data I have included. The J3 and O3 references are cells in the main worksheet that contain the time I want the match function to find.
The desired output from the formula would be if I referenced it to today (20 Nov 2012) and 19:45, it would return the value of 65,826.
It may also be worth noting that the number of columns and rows in the data set is dynamic.
I have a large amount of data, 97000 rows and 4 columns that I need to sort every 26 rows starting with row 26. I only need 2 columns but I'll take all four, any easy way to accomplish this task. The data is position and time and the time is in seconds from which I need the 0,.5,1,1.5... all the way to 12577 seconds.
View 1 Replies View RelatedI am trying to sort in rows, a large number of rows. I can do text to columns, delimit by colon, and sort individual rows. But I have spreadsheets that are 100s of rows long. Is there anyway to automate?
View 4 Replies View Relatedwant to be able to take a large quantity of data, sort all the like data together, and then quantify the number of each like data. I need the equations to do that.
View 11 Replies View RelatedI have some "Index/Match" formulas that return "#N/A" (which is correct) - is there a way to have it return "0" if that's where it leads?
=INDEX('[CTS - 2010.xlsm]2010 CTS'!$D$14:$ZZ$5012,MATCH($L$4,'[CTS - 2010.xlsm]2010 CTS'!$D$14:$D$5012,0),MATCH("Prod. Cost",'[CTS - 2010.xlsm]2010 CTS'!$D$3:$ZZ$3,0))
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View Relatedi was wondering if there was a way i can combine these two formulas into one large one
=IF(AF8="","",INDEX($A$3:$A$102,AGGREGATE(15,6,(ROW($L$3:$L$103)-ROW($L$3)+1)/($L$3:$L$103=AF8),COUNTIF($AF$8:AF8,AF8))))
=IF(AG8="","",INDEX($A$3:$A$102,AGGREGATE(15,6,(ROW($M$3:$M$103)-ROW($M$3)+1)/($M$3:$M$103=AG8),COUNTIF($AG$8:AG8,AG8))))
We know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedHere is a sample of my data in the column starting at I2:
1600 (I2)
57000 (I3)
256000 (I4)
5700000 (I5)
I want to sort results so that the adjacent column gives a ranking code of "A" , "B" , "C" or "F"
my requiremetns are:
iF I2 = less than 65,500 then "A"
IF I2 = 65001 - 250000 then "B"
If I2 = 250001 - 1,000,000 then "C"
If I2 > 1,000,000 then F
The folks at "A" are above average, "B" are average, "C" below aveage with significant concerns and "F" are Critical nonformance, immediate action required.
Of course I plan to copy the formula down the range.