I am trying to create a formula that will count the number of entries that contain either a name of 'A', 'B' or 'C' and fall within a set date parameter.
I am currently using this formula (which works perfectly well for 1 variable but not for multiple), where column B is my date and column R is my name field.
=COUNTIFS(Extract!B:B,"
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
My task is to sum up data in a worksheet which counts on the number of "working days"(Exclude Sat, Sun and Public Holiday) between "the date of receiving the case" and "the date of completion" of the same case.
So here I have already listed out the days of each month to distinguish "Working Days" and "Non-working days" by "1" and "0" respectively for the easy calculation of the no. of working days as I think.
like this(January):
Date
Results (Exclude holidays)
1/1/12
[Code].....
Then, I use the lookup formula to determine the receiving date (beginning) and the submission day (Ending) sucessfully.
Receiving date
completion date
Receiving date
completion date
1/3/2012
1/8/2012
1
0
Here comes the problem, I want to sum up the range of cell from the result of 1/3/2012 to 1/8/2012, i.e. (1+1+1+1+0+0)=4 to get the total no. of processing days of each case. I tried to use INDIRECT like "=SUM(INDIRECT(VLOOKUP(F5, A2:A226, B2:B226)):INDIRECT(VLOOKUP(G5, A2:A226, B2:B226)))" but it returns me #REF!
I shall use a basic example to illustrate my problem - see attached - as the spreadsheet im actually working on is huge and contains sensitive data. So, In the spreadsheet attached, the problem is: I am mowing the grass of a football pitch and getting paid by the m3 of grass i mow. however i'm getting paid more when i mow at greater distances - defined by certain 'reaches'. so i need to know how many m3 ive mowed in each reach. I make a note of where I start on the pitch and where i end, and also how much grass i mow.
so im looking for a solution that is intelligent enough to distinguish where Ive taken grass from and how much, given that i know where i started, where i finish and how much i take.
Need formula which can sum Amounts from varying Weekly time periods and the result be recorded in the appropriate month? I've attached a simple example of the way the output needs to look and a sample data table below.
View 3 Replies View RelatedI have a spreadhseet with various functions on it and what I am trying to do is this.
Cell E4 returns a >35 or <35 true or false value
Cell G4 is either blank or has "Yes" text type into it.
What I am trying to do is get cell F4 to return certain arguments.
E4 = >35 and G4 is blank I want it to state "Email Hiring Manager"
E4 = ,35 and G4 is blank I want it to state "Wait"
I have a basic IF formula that returns this
=IF(E4>35,"Email Hiring Manager","Wait")
Then if cell G4 is populated with a Yes the formula needs to overwirte the origonal if with the return arguments of
=IF(G4="Yes","Email Agency","Email Hiring Manager")
If yes then what would be Email Hiring Manager (yes will only be input if E4 is greater than 35) will be overwritten with "Email Agency"
Can this be done with two If formulas or does there need to be 3 or more to count if other IF formulas are actually returning a value?
The aim is to find those combinations of variable values which generate highest total gain. I attached the spreadsheet which shows the variables (A through K) and a Gain column. I created 5 additional tabs which show all possible 2,3,4 and 5-member combinations of the variables. These tabs are like coordinates of which variable combinations should be examined. As an example I used the first combination from the second tab = A and B. If you look at these two columns on the EXAMPLE CALCULATION tab you will see 7,7 in the Number combination which is the first number pair for these two variables. The headings of the red and the yellow columns calculate the total count for this number pair and the total gain. These were recorded on a separate EXAMPLE RESULTS tab along with some other pairs which appear afterwards (these were recorded only from the first 39 rows of the AB data). I need a macro which will cycle through each variable pair (only using the combinations from the tab 2 for now, annd later from 3,4 and 5 tabs) collecting statistics for each unique number combination it encounters (printing to a separate sheet one after one), such as shown on the EXAMPLE RESULTS.
View 9 Replies View RelatedI am trying to write a macro that will cut the text in a given cell to 16 characters. My code works as long as the text is always in the same cell, but I eventially want to ask the user what cell to use. So I want to replace the “RC[-25]” with my WorkCell variable. I can’t seem to figure out how to put it in there.
Sub test()
Dim SizeOfRange As Integer
Dim WorkCell As String
SizeOfRange = 10
WorkCell = A1
For x = 1 To SizeOfRange
Range("z" & x).Select
ActiveCell.FormulaR1C1 = "=LEFT(RC[-25],16)"
Next x
End Sub
Split from Copy, Cut, Fill Relative Or Absolute Formulas
Originally Posted by AAE
Welcome to Ozgrid.
Assume the following:
Cell A1: is the input cell
Cell B1: contains a number
Cell C1: formula = A1*B1 or $A$1*$B$1
Your formulas must contains absolute cell references, other wise Excel will attempt to update them to the new cell references when copying/pasting.
If you "cut", rather than copy, Excel will maintain the original cell references in the formula.
Both of these questions are well within the experience level of a user with above average skill level as your profile shows. Please lower it (before one of the Admins does it for you) to a more realistic level.
See this training page on how to toggle between relative/absolute cell references: [url]
Well cutting is a nifty trick, thank you for that, I don't believe you quite understood my first question.
Lets use my calculator for instance. Using something it has designated K (for no apparent reason) I can enter a formula, such as K=*2-4, and after that is entered every number I then type and press equals to it will run that formula and spit out an answer. (after entering that function, if I press "5" "equals" it will give me "6") Now what I'm wondering is if excel has a "K" function that I can assign to certain cells, namely a column, so that whenever a figure is typed in any of the cells in that column, the required operation is done, namely *.9685.
In a macro I am writing, I am trying to use the data stored in a variable inside a formula. Specifically, my variable holds a string that represents the title of a specific sheet in my workbook. I am trying to put this variable into the count formula to be used as the sheet location.
View 9 Replies View RelatedI need to run a formula each month which calculates the ‘product’ for a range of cells in a column, where the cell range will change each month. The starting cell for the range is static, but the range end will always change - additionally, the last valid cell will always be followed by a null value cell. The attached example shows the basic format of my data – a range of values, by row, which will always end with a null value cell. The formula I’m using (to match my example) is: =(PRODUCT(A10:A13) –-> and I want to display the result in cell C10.
While I’ve been able to identify the ‘ending good row’ several ways, I haven’t been able to figure out what to do with this information – I seem be be lost in the translation of OFFSET values to CELL REFERENCE values. Has anyone encountered this specific scenario and found a solution?
How can one change the cell values of a worksheet by creating a setup page in another worksheet. Example: the worksheet value is =average(E7, F7, G7, AQ7)*0.6 -- which this formula makes 60% of the average. On the setup page or worksheet I want o change value of *0.6 to say *0.5 for all the cell that has this value. In other words form the setup all the values will change on the related worksheet from the setup page.
View 5 Replies View RelatedIn my financial modelling I often have a calculated number of months of inventory. This number varies. I need to use this number to calculate the actual inventory value. For eg. it may be 3.2 months of inventory; in this case I need to sum 3 cells (current month, current month -1, current month -2) plus 0.2 of the fourth cell (current month -3)
But I may need to change the number of months of inventory to, for example, 4.2. In this case I would need the sum of four cells plus 0.2 of the fifth cell etc etc.
Is there a way for excel to tell you how many formulas (formuli..??) you have in a spreadsheet?
View 6 Replies View RelatedLets suppose i have 5 columns of data. 3 of the cols have "formulas" in them and 2 do not. I want to count the number of formulas that are in a given row. Is there a way to do this?
View 3 Replies View Relatedi want to count only nonblanks cell and based other threat i try modified the formula, but this doesnt count. how can i defined this forumula to count only nonblanks cells?
View 2 Replies View RelatedIs there way I use the count formula without it counting the formulas in range being subtotaled? I have a address tab in a spreadsheet with column headings first name, last name and address. The information is only filled in from another tab (active) in the same worksheet when there is a value in the cell on the active tab. The formula on the address tab is =IF(Active!$A107=0,"",Active!$A107). If there is not a value on the active tab in a cell I don't want to see it on my address tab but the count formula treats it like a value. I want the results to only to count if a result is on the address tab.
View 4 Replies View RelatedMy spreadsheet looks something like this:
ID
Responsibility
Criteria One
Criteria Two
Criteria Three
Numbers
Functional Column
ID1
Marc
lorem
lorem
lorem
1
x
[Code] .......
I want to build a little report on another worksheet that goes over the table and counts cells (i.e. data records) based on the entries in the last column (i.e., if the corresponding data-record has an "x" in that column, then it should be counted).
As every data record also carries a numeric value in the "Numbers" column, I wanted to do this with COUNT formula combined with an IF-formula.
The formula to count the corresponding data records that match the criteria then looks something like this:
=COUNT(IF($F$1:$F$6="x";$E$1:$E$6))
However, this always counts all cells in the "Numbers" column. I want the formula only to return the range of "Numbers" cells, that belong to the matched data records.
Is there an easier or cleaner way to do this?
What formula would I use to count the nonblank cells, if all the cells within the range have formulas in them.
For example, cells A1:A50 each have a formula. As a result of the formula in the cell, 10 of the cells have values or text while the remaining 40 cells appear blank. What formula do I use to count the 10 cells?
For various reasons, I need to determine how many total calculations are being performed in a spreadsheet. These can be IF statements, sum, max, vlookups etc but I am looking to determine the quantity. I do not need to know how many of each just how many in total.
Is there a relatively simple method of conducting this search? I don't mind VBA code, etc.
I have the following formula:
=AVERAGE('sheet 2'!C7,'sheet 2'!D7:Z7)+AVERAGE('sheet 2'!C9,'sheet 2'!D9:Z9). When I copy it down to the next cell the valules need to increase to 12 & 14 respectively.
I am looking for a way to get a spreadsheet to automate calculations of unit costs based on variable packaging names.
I have a series of packages that are denoted by text phrases. Examples:
4/6/12
2/12/12
6/4/12
18/12
24/12
For our purposes let's say the package names above will always be in column A. Column B contains the frontline price of a case of product represented by the phrase in column A. Column C will contain the cost per unit of product - this is obtained by dividing column B by the number of each package arrangement that can be found in one case. Most of the time the number of package arrangements per case is denoted by the very first number in the package name (ie, 4/6/12 would be 4). This won't always be the case though (18/12 would be a package arrangement of 1).
I am looking for a way for the spreadsheet to do all of the following and return the results in column C: if the package name contains "4/6/12", divide column B by 4; if the package name contains "2/12/12", divide column B by 2; if the package name contains "6/4/12" divide column B by 6; if the package name contains "18/12", divide column B by 1; if the package name contains "24/12" divide column B by 24.
I am trying to find the number of unique 3 variable combinations there are in my rows of data. I have tried the frequency function but must be missing something.
Attached is a sample of what I am trying to achieve although there may be a better way of portraying the data.
Excel 2010
Sheet 1 contains range B12:B353 with names of people. Sheet 2 range B12:B353 contains a formula to extract the names from Sheet 1 if range D12:D353 contains a certain value:
=IF(Sheet1!D12:D354="A",(Sheet1!B12:B353)," ")
At the bottom of each column in Sheet 2 I am trying to get a total count of populated cells (a running count of names actually visible). I have inserted formula:
=COUNTA(B12:B353)
Which should count the number of cells with text in them, right? But I believe it's somehow counting the formula as text because I inserted the value of "A" in Sheet 1 Column D for 3 names. It returned a number of 331 at the bottom of my column in Sheet 2. First off, a return of 331 doesn't make sense in any way (still scratching my head at this return. It should have returned a value of 3.
I am trying to perform a count statement in VBA as below, with the 1st Evaluate I get the correct response, however with the second option it shows a 0. The variable is obtaining the correct values as per the example of 6017Complete, this is proven with the MsgBox
VB:
Dim TillNo As String
TillNo = Target.Offset(, -1) & Target.Offset(, 0) & "Complete"
MsgBox "Till Number is" & TillNo
Target.Offset(, 10) = Evaluate("COUNTIF(C3:C123,""6017Complete"")")
Target.Offset(, 11) = Evaluate("COUNTIF(C3:C123,TillNo)")
Every week I get a file download from SAP with multiple tabs and on each tab are variable number of rows (can by 10 or 20 or 200, doesn't matter). I recorded a macro to add additional information that is required for the team prior to discussion each week (namely column D, E, K and O).
I am not experienced w VB but I know there has to be a way to account for the fact the rows vary each week. See my code below (pasted only a portion covering a couple tabs but you can see in the first part how it was 11 rows this week. Next week could be 25 rows. So how do I properly reflect that in the macro?).....
VB:
Sheets("BPTO").Select
Range("D2").Select
ActiveCell.FormulaR1C1 = _
"=IF(ISERROR(VLOOKUP(RC[-1],css,2,FALSE)),(VLOOKUP(RC[-2],css,2,FALSE)),(VLOOKUP(RC[-1],css,2,FALSE)))"
Range("E2").Select
[Code] ......
I am working on a set of Books to be published together. I am attempting to count the number of times a Book contains a glossary word that only appears once in the whole series. Conceptually I need to check if a word in A1 == any word in Sheet2 A:A, if so then does the value in Column B == 1, if so increase count by 1; if not proceed to A2 == Sheet2 A:A, and so on.
If this were a basic program I would do as follows:
C==2 **place count
s==size(A:A) ** check for length of column A (which I know is 179)
if C<=s
match (A'C', Sheet2 A:A)
if B'C' = 1
COUNT == COUNT + 1 ** COUNT is the number of times a book contains a word that only appears in that book.
Else
[Code]...
Here is a sample set up
Screen.jpg
I have a workbook with multiple sheets. On each sheet is different sets of sales person data. Each set consists of a sales order number, and the type of product that was sold.
I need a count of all the distinct product types that each sales person sold.
I need the solution in VBA, as i need to run the macro through all the worksheets. The size of the range for each sales person differs.
I have got all the VBA done, except for the part where i specify the FORMULAR1C1 for the specific cell, to do the distinct count.
I have a workbook with several sheets, some are permanent and then there are certain sheets whose quantity varies depending on how many sub-contractors we use on a given job. The workbook starts as a template and there are 10 sub-contractor sheets to start with, if we only have 5 subs then the last five sub sheets are deleted. The sheets start out with the tabs named "Sub 1" "Sub 2" etc. but after the book is set up the sheet tab names are changed to the sub name. I've included some partial code below, with the goal being to run code on the sub-contractor sheets no matter the tab name or how many there are.
So the workbook has 5 "non-sub" related sheets, I was thinking that if I could do a sheet count -5, and get that number into the array it would accomplish what I want to do. And if someone added a new sheet it would still be processed with the others.
Public Sub SubConEstNum()
On Error Resume Next
Dim S As Worksheet, names As Variant, i As Integer
names = Array(6, 7, 8, 9, 10, 11, 12, 13, 14, 15)
For i = LBound(names) To UBound(names)
Set S = Sheets(names(i))
S.Range("T3").Value = S.Range("S3").Value
S.Range("T1").Value = S.Range("S1").Value
S.Range("T2").Value = Sheets("Bill").Range("K1").Value
Next i
End Sub
array variables:
How can I count the number of elements of a particular dimension of an array variable that have actually been filled with items/values?
For example, the array variable in this procedure has two dimensions. Dimension 1 has three elements, and dimension 2 has 5 elements. I then add values to some, but not all the defined elements of dimensions. How can I count, for each dimension, the number of elements that have values rather than are empty?
Option Base 1
Sub test()
Dim ExampleArray(3, 5)
ExampleArray(1, 1) = 3
ExampleArray(1, 2) = 4
ExampleArray(1, 3) = 2
ExampleArray(1, 4) = 6
ExampleArray(2, 1) = 5
ExampleArray(2, 2) = 9
End Sub