Sumproduct Cell Reference Not Working
Jun 18, 2009I have the following line of code in the code for a textbox in a userform:
View 4 RepliesI have the following line of code in the code for a textbox in a userform:
View 4 RepliesI have this formula below that counts all matching cells that fall between two dates (a Monday to the next Monday) where S2 and T2 are the dates (one week apart).
I have 52 colums ie one for each week.
=SUMPRODUCT(($G$3:$G$1000>=S2)*($G$3:$G$1000
Basically I have an equation:
=SUMPRODUCT(G9:G11,H9:H11)/SUM(G9:G11)
It's just a simple percentage calculator for my purposes and works fine as is. However, I want to make it dynamic whereby from a user input the length of the array will increase or decrease, e.g. G9-G11 will become G9-G12 if there are four rows occupied with data. For all my other SUMming equations I have solved this and even came up with what I think is a perfectly valid solution for this one. The one problem is that it doesn't work when combined into a single equation.
My solution for the upper part of the fraction is this:
"A1"=SUMPRODUCT(INDIRECT("G9:G"&MIN(ROW(G9)+A8-1)),INDIRECT("H9:H"&MIN(ROW(H9)+A8-1)))
Where the user inputs the number of rows used in A8.
The solution for the lower part of the fraction is this:
"A2"=SUM(INDIRECT("G9:G"&ROW(G9)+A8-1))
[code]....
I have formula but would like to change the ="03-01-2011" to reference what is in a cell =a2, etc.
=SUMPRODUCT(--(LEFT($B$2:$B$3582,10)="03-01-2011"))
SUMIF allows one to enter a [valid] criteria text string into cell D2, say
">14000", and then reference D2 as the function criteria, e.g.,
=SUMIF(B5:B10,D2,C5:C10).
Is there a syntax that SUMPRODUCT will accept that does the same thing? Note the inclusion of a comparison operator is important.
{=SUM(IF(MONTH('3107'!$A$2:$A$188)=MONTH($A6),'3107'!F$2:F$188))+SUM(IF(MONTH('3207'!$A$2:$A$188)=MONTH($A6),'3207'!F$2: F$188))+SUM(IF(MONTH('4107'!$A$2:$A$188)=MONTH($A6),'4107'!F$2:F$188))+SUM(IF(MONTH('4207'!$A$2:$A$188)=MONTH($A6),'4207 '!F$2:F$188))+SUM(IF(MONTH('4307'!$A$2:$A$188)=MONTH($A6),'4307'!F$2:F$188))+SUM(IF(MONTH('AS21'!$A$2:$A$188)=MONTH($A6) ,'AS21'!F$2:F$188))}
Failed to convert using
=SUMPRODUCT(--((IF(MONTH('3107'!$A$2:$A$188)=MONTH($A6),'3107'!F$2:F$188))+SUMPRODUCT(--(IF(MONTH('3207'!$A$2:$A$188)=MONTH($A6),'3207'!F$2:F$188))+SUMPRODUCT(--IF(MONTH('4107'!$A$2:$A$188)=MONTH($A6),'4107'!F$2:F$188))+SUMPRODUCT(--(IF(MONTH('4207'!$A$2:$A$188)=MONTH($A6),'4207'!F$2:F$188))+SUMPRODUCT(--((IF(MONTH('4307'!$A$2:$A$188)=MONTH($A6),'4307'!F$2:F$188))+SUMPRODUCT(--(IF(MONTH('AS21'!$A$2:$A$188)=MONTH($A6),'AS21'!F$2:F$188)))))))))
A6 is a month column and looks like this "Jan-08"
the '3107', '3207', '4107', etc. are the names of specific sheets, so I'm summing over multiple sheets.
In reference to an earlier thread, which shg and ByTheCringe2 both were genereous in their assistance, I would like to add a wrinkle, as requested by the end-users.
how to reference an earlier thread for people to reference but you can search " Sumproduct By Last (criteria) Month With Data". Edit by ByTheCringe2: Sumproduct By Last (criteria) Month With Data.
We had used the MAX function to find the most recent investments, per counselor, per bank. I now need to find the most recent investments as of a certain date (month-end perhaps). I have ideas, but I'm afraid my misperceptions/assumptions might hinder me from seeing all available options. Initially, I thought I could use a text or listbox on the summary sheet to enter a date that would link to the reference cell on the data page, and this reference cell would then be used in whichever formula I came up with.
=((SUMPRODUCT((('Data Sheet'!$A$2:$A$997<2110000)+('Data Sheet'!$A$2:$A$997>2119999)),--(ISNUMBER(MATCH('Data Sheet'!$B$2:$B$997,{300100,302100},0))),('Data Sheet'!E$2:E$997*IF('Data Sheet'!E1<=$F$4:$G$4,1,0))
The last part of the formula is the problem, the first two arrays are conditions and the last array is a sum if f4 a period of the year is equal or less to the data sheet tab it is summing.The formula below works fine, but when the last condition is added it doesn't work.
=((SUMPRODUCT((('Data Sheet'!$A$2:$A$997<2110000)+('Data Sheet'!$A$2:$A$997>2119999)),--(ISNUMBER(MATCH('Data Sheet'!$B$2:$B$997,{300100,302100},0))),'Data Sheet'!E$2:E$997)
what I want is quite simple actually. Worksheet 2 contains two columns where I want to search for certain text, when it finds the text in both columns (B & D) I want it to sum up the values in the same row on column F.
If I understood correctly there should be 2 ways to do this, using the SUMPRODUCT formula: ....
I am using the following formula :
=SUMPRODUCT(--('Fleet Dumps'!P6:P400+'Fleet Dumps'!K6:K400E1+E2))
This works fine as long as there is data in the ranges 6:400 when there is not in come cells it returns #VALUE, in the ranges ther is a lookup such as :
=IF(ISERROR(VLOOKUP(L6,$B$7:$C$9,2,FALSE)),"",VLOOKUP(L6,$B$7:$C$9,2,FALSE))
So not sure if that is causing it.
=SUM((DATA!$F$2:$F$3000=A3)*(DATA!$N$2:$N$3000="N")*DATA!$J$2:$J$3000)
This formula doesnt work but =SUM((DATA!$F$2:$F$25=A3)* DATA!$N$2:$N$25="N")*DATA!$J$2:$J$25) works. Thats because all the other cells higher than 25 have a reference to another cell. How to solve it? Maybe with SUMPRODUCT / ISBLANK? See attached file.
I am trying to sum up column V, when for a specific date in column z, and only sum when the two names EEM, Merri1* are involved. I used the * because there are a couple of variations for MErri1 after the 1. The formula is not working. I believe it's the way I'm combining this
[Code] .....
Full formula is below:
[Code] .....
I'm trying to work out how to fix the formula below to take into account and ignore and text entries, while giving me the result of the sum of column K minus the sum of column J. If I delete the text entries, the code works but I need the text entries to stay where they are. I've attached a sample sheet with fake info to explain whan I'm trying to do.
Cell N28 on the 'MGMT INFO' tab contains the following formula:
=IF(ISERROR(SUMPRODUCT((Sheet01!$K$1:$K$1000)-(Sheet01!$J$1:$J$1000))),0,(SUMPRODUCT((Sheet01!$K$1:$K$1000)-(Sheet01!$J$1:$J$1000))))
Columns J and K on the 'Sheet01' tab contain the Pay and Invoice information for all the work planners for that client that I'm trying to find the difference between. Each work planner has 'Pay' and 'Invoice' also in that column though, one entry per planner which is causing the SUMPRODUCT formula to screw up.
I am using this formula in Product Balance Update.xls,Tsuchiura worksheet that update data from A-Tsuchiura.xls, INVOICE worksheet.
When both workbooks are is opened, all linking are fine.
But upon A-Tsuchiura.xls is closed, my linking in Product Balance Update.xls,Tsuchiura worksheet will shows #N/A.
I had tried many ways for sumproduct
1) =SUMPRODUCT(--('\SomfactoryDistributionShipment[A-Tsuchiura.xls]INVOICE'!$B$14:$B$97=A3),--('\SomfactoryDistributionShipment[A-Tsuchiura.xls]INVOICE'!$G$14:$G$97))
2) =SUMPRODUCT(('\SomfactoryDistributionShipment[A-Tsuchiura.xls]INVOICE'!$B$14:$B$97=A3)*('\SomfactoryDistributionShipment[A-Tsuchiura.xls]INVOICE'!$G$14:$G$97))
I had read through this forum that sumproduct should work in closed workbook but I still cant get it why this error ocurr..
Please refer to attached to have a clearer picture of error
The formula is =SUMPRODUCT((Group="A")*(Project_Description="Long Term")*(Profile="B")*(INDIRECT(B9)="x"))
B9 through M9 have header text Jan_2012, Feb_2012...Dec_2012. Basically my aim is to get the above formula working before I drag it across so that the named ranges get picked up automatically from the headers.
Jan_2012 thru Dec_2012 are dynamic named ranges using INDEX (and not OFFSET as someone mentioned OFFSET is a volatile function).
The above SUMPRODUCT formula is giving me a #REF! error for the (INDIRECT(B9)="x") part. I know that because when I replace it with (Jan_2012="x") it works fine.
I realized while writing this that it may be because the named range in Jan_2012 is not the same size as that of other arrays. [but it is the same size - I've re-confirmed just now]
Using Excel 2003, I'm summarizing info in one sheet (Review) with data in another worksheet (Work Orders). The following SUMPRODUCT calc worked fine...
View 2 Replies View RelatedI've been trying to copy and drag formulas on my spreadsheet by the references are not working. Example. I have =$B1 in cell A1. If I copy and drag that to A2 it remains =$B1. And it should change to =$B2, correct? Same as if if make the column absolute.
View 9 Replies View RelatedI'm trying to do is delete a row of chosen cells in my form (form is locked with a password) using a macro then return back to the first cell below the deleted row. When I run the macro what's happening is that it's returning back to the cell chosen while writing the macro (which is at the very top A7). So if I'm several rows below A7, it deletes the row and then returns all the way back to the top of the form causing the user to have to scroll back down to where they were
View 3 Replies View RelatedI often have problems with the cells range reference method. For some reason I get an error and can't tell why. Other times it works fine. Is this just an unstable method to use or is this completely wrong? I'm assuming I am using the wrong syntax. It is definetly the range reference causing the problem.
Dim cnt1 as integer, cnt2 as integer,cnt3 as integer
cnt1 = 2
cnt2 = 50
cnt3 = 2
dim myrange as range
set myrange = sheets("sheet1").range(cells(2,cnt1), cells(cnt2,cnt3))
I have no idea why it won't work. I'm basically searching a columner range of cells.
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I am using the find function to establish the row number in a spreadsheet for an edit process.
Code:
wks.Range("B:B").find("something").Row
the cells in Range("B:B") are linked to another worksheet. If I copy paste values on the cells in Range("B:B") the code above works a treat.
I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:
View 2 Replies View RelatedI have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB
ABC
CDE
And have a formula in column B that converts this to
=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)
I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?
Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies View RelatedHow do i change the formula, =SUMPRODUCT(c14:au14,c15:au15) to include more columns added to row 14 and 15 in future.
Since the column count will increase , the sumproduct has to be like
=SUMPRODUCT(c14:"last cell in 14th row", c15:"last cell in 15th row")
I have 5 columns set up: A,B,C,D,E
D is the sum of A and B
E is the sum of A,B,and C
As I add in a new column to the right of C (call it C2), I need D (which has shifted over one) to sum A,B, and C.
I also need E (which has also shifted over one) to sum A,B,C, and C2.
Essentially I need a function in a cell that will be able to reference two cells to the left even as more cells are added.
I have this formula -
=SUMPRODUCT(('[Australia Load Tracker - March 2014 - V2.xlsm]QA'!$E:$E=B4)*('[Australia Load Tracker - March 2014 - V2.xlsm]QA'!$D:$D=$A$2))
Which works perfectly if A2 has the cell value 24/03/2014 however, if i put in $A$2 this value
="02"&"/"&$XFC$1&"/"&"14", where XFC$1 equals =IF(XFD1>9,XFD1,"0"&XFD1) and XFD1 = =MONTH(TODAY())
Which in basic term gives the month value "03"
The cell shows the value 24/03/2014 however does not work with the sumproduct.. is there anyway to get sumproduct to read this cell value as 24/03/2014 as the whole point is so every month I don't have to update anything and it will constantly update...
The only alternative i can think of is quickly making a VBA script to hardcode the cell values for the dates and change the month value for the middle of the cells every month.
I am trying to use the sumproduct function with ranges defined in my VBA code. I can’t seem to get it to work.
I have two spreadsheets in the enclosed work book – T1, T2
T2 has four columns with the first three columns are text and the fourth column is an integer. The rows in this sheet may be repeated.
T1 has four columns similar to the first three columns in T2. However, the rows are unique. I am trying to do a sumproduct for obtaining the counts on the fourth column in sheet T1
To obtain the values for the fourth column (for each row) in T1 I do the following ...
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.