Running Macro When Change Made To Worksheet
Feb 16, 2012
The intent of the code below is to run the marco HideCol when a change is made in cell C10. If I actually change the value in C10 it works. However, I have C10 linked to another worksheet (=anotherpage!A13). When the value changes, my macro is not executing.
Here is the code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim changed As Range
Set changed = Range("C10")
If Not Intersect(Target, changed) Is Nothing Then
HideCol
End If
End Sub
View 3 Replies
ADVERTISEMENT
Aug 17, 2009
I've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
View 6 Replies
View Related
Jun 11, 2009
Running Two Worksheet Change Scripts Gives Error
I need to run two VBA scripts on the sheet1 tab:
View 2 Replies
View Related
Jul 31, 2014
I am trying to run a macro when any cell in a range changes. I have got this to run, but only on one cell, not any of the cells in a range.
Working code:
[Code]....
Non working Code:
[Code] .........
I am at a loss as to why the range code won't work, or why the first code won't work without makig the cell reference absolute.
View 3 Replies
View Related
Apr 17, 2012
I have following macro run when the given cell changes:
HTML Code:
Private Sub Case_Checkout(ByVal Target As Range)
Dim KeyCells As Range
Dim WS As Worksheet
Dim LkUpVal As Range
Dim LkUpRng As Range
[Code]...
It was working...and then just stopped working. I scan a barcode into cell A1 and hit enter. Can't figure out why is stopped unhiding the tab. I haven't changed anything...
View 1 Replies
View Related
Oct 23, 2009
I am trying to create a program that will allow the user to browse for an excel worksheet and execute a macro that will format the worksheet with a click of a button.
Here is an image of what I want the template to look like:
Picture 2.jpg
Now I need to know what language I should use and the codes to make it run.
View 6 Replies
View Related
Aug 13, 2012
I am using an event macro to trigger a set of calculations. In the spreadsheet, users have a choice of 3 input cells to work out an answer; these 3 cells work out the same cost from different angles depending on the variables available to the user.
Users only ever need to fill in one of the three cells to work out the answer as the event macro I designed, should (upon input by the user), work out the remaining two input cells using logical arguments.
The macro and calculation work fine, except in the event of users amending a value in an input cell previously updated; in other words, if all 3 cells contain a value and 1 of them is being changed by a user.
The issue: I need the event macro to recognise the location of the last change made by the user in order to determine which 2 of the 3 cells need to recalculate. However, users will invariably press enter or tab etc... upon making changes and this has caused me issues so far.
What I have tried already:
1) running another event macro "on selection change" to record elsewhere in the model all cell selections as and when the user interacts with the model
EFFECT: it made the "on change" event macro very slow and clunky; so I need to avoid
2) declaring a range as set r = activecell.address
EFFECT: this did not work as the active cell's address would in fact be the address on the last cell; e.g. the one selected further to pressing enter (often the one directly below the cell recently changed)
A solution to add to the existing "on change" event macro that identifies the last edited cell
View 8 Replies
View Related
Jan 10, 2010
I am using Excel 2003, my problem is that I have cells D4 & E4 with red text, when an entry is made in B4 (say $640, the amount can vary) I want the text in D4 & E4 to turn black. I have attached a section of the document in question.
View 5 Replies
View Related
Jun 18, 2014
I have created a spreadsheet which uses data validation to allow a user to select a company, start Date, end date, and projected months in order to output different figures. I have attached a spreadsheet to this post in case that was hard to understand.
Since there is data validation, indexing, and matching going on, as different selections are made, various tables change as a result. What I mean as you open the example sheet and start messing around with the data validation boxes.
The problem I am encountering now, is creating a chart that will also keep changing as the user changes their selections in the data validation boxes. I am unsure if this is even possible, but I figured it was worth a shot to ask. On the example sheet, I have included a graph similar to the one I want, but it only contains data in a certain range of cells, rather than dynamically changing to accommodate whatever data is outputted.
Here is what I am looking for in the graph:
1. Whatever dates are selected by the user in the data validation boxes, along with the projected dates will be on the x-axis.
2. The PMPM figures associated with the selected dates, and the projected dates on the y-axis.
3. Ability to make different selections from the data validation boxes and still have a dynamic chart that keeps updating itself.
View 2 Replies
View Related
Jul 30, 2012
Pls see below codes, the codes can record down changes made "from" and "to" and put on the "Log" sheet, however it is unable to capture the original values when I first open the file and make the changes.
Also, how can I put the value of "Now" in column B?
Code:
Dim PreviousValue
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Value PreviousValue Then
[Code].....
View 9 Replies
View Related
Apr 8, 2008
I've developed a workbook that is designed to allow users to produce a list of aspects (one per worksheet) and edit them as the aspect changes. However, i would very much like to create a 'log' of changes. For example, everytime a cell is changed the cell reference, worksheet reference and date are added to a list on a hidden worksheet.
View 9 Replies
View Related
Jul 3, 2008
I have options buttons in a userform, first is "$" the other is "€"
When somebody chooses one of them, it writes the choice to a cell in the data sheet. But when clicked on the next userform I want some of the texts automatically change the currency depending on the choice made in the previous userform.
The formula below was is example
=""&Data!$A$2&" / m³"
=""&Data!$A$2&" / kWh"
View 9 Replies
View Related
Jan 5, 2014
I have a protected worksheet that is shared between 2 departments. Is there a way of making the hide/unhide function available without unprotecting the worksheet.
Macro would be the most obvious way but believe you can not share a workbook when a macro is incorporated.
View 2 Replies
View Related
Oct 23, 2008
Is there a way to either change this so that it lets me to select the whole area or a way to make a macro to do what this does to one cell?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("M13:IR458")) Is Nothing Then
Select Case Target.Value
Case "1"
Target.Font.ColorIndex = 20
Target.Interior.ColorIndex = 10
Case "Good"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 35
Case "Stable"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 27......................
View 9 Replies
View Related
Feb 1, 2009
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
View 5 Replies
View Related
Mar 31, 2009
Is it possible to write a macro that will run if a user enters data into any cell in the worksheet that has a formula in it.
View 9 Replies
View Related
Jan 25, 2013
I have a sheet called Summary. On that sheet, Cell O6 has a drop down with two options, when you change these options, a number of other cells on the same sheet automatically change (just using formulas). Including a cell that I've given the named Range of 'testCell'. Based on the drop down, test cell will either = 8 or 9.
What I also want to change is the format of a range of cells whenever O6 is changed - but only when O6 is changed.
However, the following code does not work. It works fine if i remove the 'If Target.Address = "O6" Then ...' but doesn't work with it included.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "O6" Then
If Range("testCell").Value = 8 Then
Range("P10:AD27").Select
Selection.NumberFormat = "_($* #,##0_);_($* (#,##0);_($* ""-""_);_(@_)"
Range("O6").Select
[code].....
View 2 Replies
View Related
Jun 14, 2007
If nothing is typed in and the OK button is pressed, it changes the entire sheet to values. I'd like the macro to stop if nothing is selected.
Dim sCol As String
sCol = InputBox("Select Column")
Set UserRange = Range(sCol & "9:" & sCol & "35")
UserRange.Value = UserRange.Value
View 6 Replies
View Related
Oct 28, 2012
I have a worksheet change macro that from the insertion of date (dd/mm/hhhh) in a cell, fills some other cells with the day number, the week number, the month,...
Everything works fine when i fill one date after the other. But when I try to fill many cells with the same day by dragging the black cross at the right corner of the cell the macro is not activated. how to activate a worksheet change macro by dragging the black cross as a mean to fill many consecutive cells in a column?
View 6 Replies
View Related
Mar 27, 2014
Say i have a Worksheet named "gateway" or sometimes it will be "gateway (2)" (3) and so on. Is there a macro that i can call that in some ways calls the active worksheet and renames it to just "gateway" everytime?
View 2 Replies
View Related
Sep 27, 2008
i created a sheet and called it "Original" (which somehow is a template), in another sheet i created a big Button named "Create account" ,then i created a macro which copies that "Original" sheet and by default it names it "Original 2 " now that i need a new account each time i click that button to create a new sheet and rename it by the client name i need, in order to keep the "Original" intact as a template. It happens sometimes by mistake that i rename the "Original" one ( The template one) which therefore returns an error when i click the button!
Is there anyway to add to that macro a code which rename that "Original 2" something else lets say "Account" to differentiate it from the Template one?
Or to Protect only the "Original" sheet from being renamed out of the whole sheets i have , in order not to rename it accidentally?
View 9 Replies
View Related
Jul 2, 2013
I am using the...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
... to capture when a user is about to close a workbook. I then give them a message: "Are you sure you want to exit? Changes you made since you last saved will be lost."
However, to make it neater, is there a way to only trigger the macro if they have made changes since the last save? In other words, if they have not made any changes since the last save, the message will not be displayed, since it is irrelevant.
View 2 Replies
View Related
Jul 31, 2008
In Col D of my spreadsheet, I have a list of security codes, in this list there is a security code "all", i need a macro that will add 1 to the code, so it reads "all1", now i need the macro to run as soon as new data is pasted to sheet "Lending", the ranges in Col D do change on a daily basis therefore cell reference for security codes is not fixed.
Can this be achieved? ............
View 9 Replies
View Related
Dec 3, 2008
When I step through a macro (sessions) or run the macro seperately, it works as intended. When I have it run off of a worksheet_change it doesn't work. Is there an easy fix for this?
Original
Sub sessions()
Dim a As Integer
Dim x As Long
x = Sheets(1).Range("a" & Rows.Count).End(xlUp).Row
Sheets(1).Unprotect Password:="password"
For a = 2 To x
If Cells(a, "m") = Cells(a, "d") And Cells(a, "m") 0 Then
Cells(a, "f").Resize(1, 6).Select
Selection.Locked = True
ElseIf Cells(a, "m") Cells(a, "d") Then
Cells(a, "f").Resize(1, 6).Select
Selection.Locked = False
End If
Next a
View 9 Replies
View Related
May 12, 2006
I have a workbook with about 12 worksheets within it. I am trying to input a button on worksheet 3 that when pushed would activate worksheet 12. Basically the same as if you clicked on the tab at the bottom of the screen called worksheet 12.
I realise that you have to create a button which Ive done. However I cannot seem to figure out the proper macro code to get the button to change the current worksheet when its pushed.
View 4 Replies
View Related
Feb 13, 2009
I have a warehouse of skids with multiple boxes of barcoded documents on each skid. The tab "Warehouse Inventory" has the range of barcodes in each box on a given skid (boxes are numbered, skids are lettered). Under the Search tab, I will be copying a list of barcodes into Column A, from another spreadsheet, and would like a macro, to autorun upon any changes made to the spreadsheet, that will do a VLOOKUP type search and reply back in Column B and C the skid letter and box number respectively
View 3 Replies
View Related
Jun 24, 2009
determine the coding for a worksheet_change macro for the attached spreadsheet? I've got a macro set up in the worksheet and would like it to run any time there is a change in any of the cells on the worksheet.
View 4 Replies
View Related
Apr 26, 2009
I need a macro that will create a new blank worksheet, move it to the last spot and paste the entire contents of the sheet named "master" into the newly created sheet.
I have tried to do this with the recorder but have been unable to get it to work.
View 9 Replies
View Related
Sep 26, 2013
I created some excel 2003 spreadsheets to use for Fire/Police dispatchers. I have a series of yes/no option buttons that were created using the control toolbox. I have a macro that clears all the blanks where text is added, but want to add a line that clears the option buttons also.
View 14 Replies
View Related
Sep 9, 2008
I am having grief trying to get a sub from a Module to run when a single cell on a worksheet changes.
The code I have at present is:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("p4")) Is Nothing Then
wksheet = Name
vbgraph wksheet
End If
End Sub
View 9 Replies
View Related
