the AND part of the statement tells the cell to see if 4 cells are all <-10 then do its thing that part works what i need now is if that has happened then do not do the next 3 cells
View 2 RepliesIF statement that looks at a cell to see if it contains a word.
ie IF A2 has " Total" in it then do this
Perhaps a bit cryptic but here is where I'm looking for.
Cell A1 gets the value YES (or NO) assignment by the user.
Cell B1 has some calculated value let's say 4 based on the formula If(A1="YES";2+2)
Now If the user assigns "NO" to A1 the value of Cell B1 becomes FALSE (return value of second part of the If statement)
I do not want the value of B1 changed if A1=NO and to stay the same (4)
I have two colums of data with names in them, Column A and B. I want to see what names in column B also occur in column A and I want to put this function in column C. So for instance if I want to see if "John" is also in column A and if he is then I want column C to say yes beside Johns name in column B.
View 3 Replies View RelatedI'm trying to nest an if statement across part number and category into a period format but can only manage to get to work if I do on individual category but would like across entire category.
Red
Green
Yellow
Part Number
Amount
Period
Amount
Period
Amount
Period
[code]....
i am using the IF script, and i am also using the COUNT script in the logical part of the IF statement. i need to make sure that both K3 and V3 have a value inside of the cell in order for the statement to work, although when just K3 has a value, the IF - TRUE statement works anyway. any ideas on how to fix this? =IF(COUNT(K3,V3),SUM(K3+V3),"")
View 4 Replies View RelatedI am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I need to sum cells that contain this formula: =if($c$5=0,"",c5*b5). I am getting a wrong data type value error.
View 7 Replies View RelatedI am trying to find particular text in a cell then format adjacent cells in the same row. In my code below I am trying to search for "*[Tx]*" using Like, however this is formatting all text that contain "T".
View 7 Replies View RelatedI want to know how to display part of a cells text value, inside another cell.
Suppose in cell A1 i have "20-Jun-14"
How would I get cell B2 to display just "Jun"?
I'm wondering if there is a way of linking to cells by looking up part of the link in another cell. E.g.In Sheet1, cell A1, i have some data that I want link to from Sheet2. Normally I'd do that by using "=Sheet1!A1" in the cell in Sheet2.
But I'd like to lookup the "A1" part of the link from two different cells in Sheet 2. Something like: =Sheet1!(Text from B1 in Sheet2 AND Text from A2 in Sheet2)
or: =Sheet1!(Sheet2!B1&Sheet2!A2). So that if Sheet2!B1 would contain an "A", and Sheet2!A2 would contain a "1" the resulting link would be the correct "=Sheet1!A1"
I want to add all of the numbers in column D if Column C contains the word "REMO"
View 4 Replies View RelatedI'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View Related1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I'm creating a worksheet that gives a list of part numbers based on the product part code. In most cases I can use the following.
=LOOKUP(O6,{0,1,2,3,4},{"NONE (M25)","SMP-55-001","SMP-55-004","SMP-55-008","SMP-55-014"})
so this gives a part number depending on what number is placed in O6. What I need to do know is look at 2 different cells and for each combination of numbers give a different part number. so if A1 is 2 and B1 is 3 give a certain result.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedCan I use part of the data in a column of cells to sum data in a column.
E.g. I want to sum valves in Column V that match the Data in Column T by using the following cells CB 1A1x, CB 1A2x, CB 1a3x CB 1A5, etc etc CB 1B3x...... to obtain the totals
For CB 1A1, CB 1A2, CB 1A3 etc etc.
Capture.JPG
Is there a way I can write a formula to get names from a different worksheet if I type part of that name in the active sheet.
Say Sheet1 contains cells like
1026 Wild hard nuts fruits -Named Fgl1026
1028 Wild Soft nuts fruits -Named Fgl1028
In active sheet, when I type Fgl1026, I want the next cell to left of the activecell to show Wild hard nuts fruits.
[img][/img]
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedI am trying to get the following equation to search for cells that contains the term 3R. The issue is I have several different 3R formations as follows and want it to count all of them.
3R
3R FIB
3R S Nasty
3R S Nasty FIB
This is what I am currently using but I want it to be more detailed. Where my search is for everything on 1st down with 10 yards to go in a 3R formation.
=SUMPRODUCT(--(C2:C350=1),--ISNUMBER(MATCH(Criteria,{10},0)),--(H2:H350="3R"))
23
20
1
10
-19
R
Run
PISTOL HVY
3R
[Code] .......
I have a simple sentence in cells C3, D3 and E3. The sentence in C3 is:
Find Airfare to Chicago, Airline Tickets to Chicago, and More | XXXXXXXXX®
D3 contains: XXXXXXXXX highlights outstanding airfares to Chicago from quality airlines and agencies. E3 contains my list of keywords: Chicago Flights, Cheap Flights to Chicago, Cheap Chicago airline tickets, chicago flight, chicago airfare, chicago airline ticket, chicago airline tickets
The XXXXXXXXX in the C&D cells is the client name which I had to blank out in order to post here. I wasn't sure if you guys would need to know exactly how many characters there are in each cell. In column B3 is the name of the city, in this case the city is Chicago. I have 8000 destinations so I need a formula that will take the city (or any information) in the B column and replace that in the C, D and E columns in the appropriate place. I've attached a small, representative file to demonstrate.
Is there a formula where it will find all that reads 07-06 and be able to change it to 08-06? Below are samples of formulas where I am looking to change 07-06 to 08-06 without having to go into each cell and manually changing 07-06 to 08-06:
= SUM(IF('07-06 data'!$C$2:$C$103="CAM",IF('07-06 data'!$I$2:$I$103="INCOMING - NEW",1,0)))
=SUM(IF('07-06 data'!$C$2:$C$103="MSP",IF('07-06 data'!$I$2:$I$103="INCOMING - NEW",1,0)))
=SUM(IF(('07-06 data'!$C$2:$C$103="CAM")*('07-06 data'!$I$2:$I$103="INCOMING - NEW"),'07-06 data'!$J$2:$J$103))
Following problem:
I have a list of changes on our bankaccount.
Sometimes, in the description a payment we receive the name of the person who transferred the amount is mentionned.
It can be anywhere in the string, it can be just his/her first name, it can be his/her full name...
I also have a list of all our clients with first name in column A, second name in column B
Something like this:
string from bancaccount:
EUROPESE OVERSCHRIJVING VAN BE16 6712 5615 7974 BANKIER OPDRACHTGEVER: EURBBE99 VANDERSMISSEN WILLY VAN PLAKSTRAAT 176 9000 GENT 68/10762827 PENSIOEN REFERENTIE: OV-0000236-00240
client list
Francois D'hondt
Germaine Canipel
Willy Vandersmissen
Karel D'hondt
.
.
.
I'd like VBA to search in the clientlist for names that occur in the bankaccount string.
Sice ther might be a lot of Willy's in the client lsit I think it will be best to serch for the combination of both first and second name.
Once found the name the procedure should return the rownumer on which the client can be found in the client list.
Using the below formula. I know that I should get the result of 32 if I am dong this correctly (182 matches part 1 of which 32 match in part 2).
=SUMPRODUCT(--($A$1='7. PM BDE'! $J$3:$J$366))*(--('7. PM BDE'!$L$3:$L$366=1))
Is there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
Our company initial is TP, but sometimes it might be combined with a reference number, e.g TP5659
I would like the IF formula to stick pick this up..
I know if it was just the phrase 'TP' I would use =If(a1="tp"...
How do I express that I would like my If formula to work when something 'contains', not an 'exact match'
I will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)
In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)
What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)
There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.
I'm working on a spreadsheet designed to track total overtime hours worked in a year; on the spreadsheeet is a column to keep track of each day's total OT, the week's total OT, as well as a column to track the year's total. There is a formula in the week total, but the year total is calculated via a macro (day of the week total, added to the existing year total, result updated, so, each day has it's own button and macro). We have a shift that works a different week than the shift that needs to track overtime, but still must be included in the list.
Therefore, I created a column to place the shift designator so there can be recognizable diffrerentiation. With quite a bit of help from this board, and others, I've created (or been kindly given) the following macro (this is just a part of it) to total the day's overtime and existing year overtime and input the result into the cell. I now need to have this executed only when the condition I specify (say, in cell D1) is met (that would be the shift, for example the text M1 or SST). Please note, the week totals are only for user reference - they do not come into play for calculations of year totals. The below macro actually takes the totals from a day of the week and adds it to the existing year total, placing the result in the year total column.
I need for it do perform the same action on multiple rows/ cells of data. What adjustment to the code needs to be performed to do so?
Sub fconcat()
Range("C1").Value = Range("A1").Value & Range("B1").Value
For i = 1 To Range("A1").Characters.Count
Range("C1").Characters(i, 1).Font.Name = Range("A1").Characters(i, 1).Font.Name
Next
For i = 1 To Range("B1").Characters.Count
Range("C1").Characters(Range("A1").Characters.Count + i, 1).Font.Name = Range("B1").Characters(i, 1).Font.Name
Next
End Sub
I have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View Related