If Statement To Check Part Of Cell Contents
Apr 4, 2007IF statement that looks at a cell to see if it contains a word.
ie IF A2 has " Total" in it then do this
ADVERTISEMENT
If Statement - Check Contents Of Cell To See If It Equals Date
Oct 19, 2011I am trying and failing to write an if statement in excel (not vba) to check the contents of cell H3069 to see if it equals 29/06/2011.
I have written the following
Code:
=if(DateValue(H3069)="29/06/2011","Y","N")
which returns #Value!
Copy Part Of Cell Contents
Dec 2, 2011I need a way to copy part of contents from a cell, the cell contains product information like size, name and weight of a product, and I need a copy the weight to be put in it’s own cell, here’s a copy of one cell “E65 MAPP SKDV 5 DIGIT 90G ST.K” the information I need from this is “90” the number is always followed by a capital G, but it’s between two and three digits where the lowest is 55G and the highest is 300G. Is this possible?
View 6 Replies View RelatedTo Find Part Contents Of A Cell
Apr 16, 2009I've got a code that does what I want it to do, but I have to select the start point manually becuase it's position varies on different documents. It's usually around row 650 out of 1200, but the cell I want to start the macro at always contains the word ELECTRONIC. What I would like to do is modify my code so that it finds that cell itself and then runs the rest of the code. I'm not very good with VBA, but I've tried a few things like Dim LR-2 and using that but I get error messages about duplicates.
Here's my code
HTML Sub Macro1()
'
' Macro1 Macro
' SALES ORDER FORMAT
'
'
Insert Cell Contents From One Column Into Another Based On Specific Part?
Jul 30, 2014I have a spreadsheet with four columns of text.
In column A, i have multiple levels followed by a letter (i.e. Level 1A, Level 1B etc).
In column B, i have some other details and then so on and so forth.
In column C/E/G lets say, i want to copy the information from column A to show only items that appear as "Level 1" (not "Level 1A", i only want it to check for things without the letter at the end). Then the same in column E but with "Level 2" and so on and so forth.
Column A...Column B-Column C...Column D--Column E...Column F--Column G...Column H
Level 1A....Metals----Level 1A....Metals ---Level 2A....Integral---Level 3A....Television
Level 1B....Energy----Level 1B....Energy--- Level 2B....Flowers---Level 3B....Kitchen
Level 1C....Synergy---Level 1C...Synergy--Level 2C....Full
Level 2A....Integral---Level 1D....Orders
Level 2B....Flowers
Level 1D....Orders
Level 3A....Television
Level 3B....Kitchen
Level 2C....Full
I also have data in Column B that is to do with column A (i.e "Level 1A" - "Metals") and so on with the following columns. I want the items that are in column B to also move over to column D when the things from Column A move to Column C, so at the end it will appear as below so it appears as above.
Check Cell Contain Part Of Value From List?
Aug 5, 2014how I can check if a cell contains part of a value from a list? Do I need a formula or VBA? (Both would suit)
Example:
A1= BLABLA Apple BLALBA
A2= BLABLABLA Orange BLA
List in C1:
C1= Orange
C2= Apple
If it contains one of the word, I need the function to return the word...
What I have tried:
Search formula
Match formula
VBA with "If...Like" statement
Keeping in mind that the key word Apple/Orange in A1 or A2 can be located anywhere in the "sentence" (could be after BLABLA or BLOBLOBLO or BLU etc...)
This is something I would then apply to a range (I suppose if it requires VBA, then with a loop which I would be able to manage)...
EDIT: Cells in A1/A2 will never contain two different values from the list (it is either Apple or Orange)...
The AND Part Of The Statement Tells The Cell To See If 4 Cells Are All <-10
Aug 4, 2009the AND part of the statement tells the cell to see if 4 cells are all <-10 then do its thing that part works what i need now is if that has happened then do not do the next 3 cells
View 2 Replies View RelatedHow To Make False Part Of IF-statement Not To Change A Cell
Sep 10, 2013Perhaps a bit cryptic but here is where I'm looking for.
Cell A1 gets the value YES (or NO) assignment by the user.
Cell B1 has some calculated value let's say 4 based on the formula If(A1="YES";2+2)
Now If the user assigns "NO" to A1 the value of Cell B1 becomes FALSE (return value of second part of the If statement)
I do not want the value of B1 changed if A1=NO and to stay the same (4)
IF Statement Formula Which Will Change The Contents Of The Cell
Jan 23, 2008I need to create a formula which will change the contents of the cell to one of 3 options based on the value of another cell
For example if I was using B2 as the cell to reference I need to say IF B2 = 0 then say "Closed", IF B2 = 1 then say "Open" and if its any other value then say "Error".
I'm having some trouble having all 3 if statements nested correctly.
I don't want to do this as a macro just as a formula.
Making Contents Of Cell Blank Upon IF Statement
Feb 10, 2008I have a conditional IF statement, where I want the content of the cell to be blank if the result of the IF statement is false, ie I want the content of the cell to be as if there were no formula in the cell (this if so that the formula COUNTA(Sheet1!$B:$B) only counts the cells where the result is TRUE).
For example, IF(A1=1,1,"") where A1 1, the content of the cell will have something in it (a space), and won't be blank.
Change Cell Contents With Conditional Statement
May 30, 2008i am trying to automate altering a DAT file. Basically, each line of data in the DAT file contains an entity name, an account name, and a value. for some of the accounts, i need to change the entity name. for all other accounts, i can leave the entity name alone. if i copy the DAT file into Excel, and use text to columns, how can i create a macro to compare the accounts to a range of cells containing a list of the accounts i need to alter the entity name for, and then change the entity name if there is a match?
the account does not need to match perfectly, the accounts i input only needs to contain the reference account. the list of accounts and the entity name i need to change to are in cells on another sheet. i thought about doing a loop to run through each line of data, but i am not sure how to do that.
If Statement To Check A Cell
Dec 3, 2008I'm looking for an if/then statement that will check if there is any kind of value in cell b before doing a calculation to cell J
How To Check Activecell If Blank Then Copy Contents From Cell Above
Apr 16, 2012with some basic code. I want to check the activecell, if it's blank then copy the contents from the cell above, if it's not blank, leave it & go down to the next cell & repeat until last row.
View 7 Replies View RelatedUsing If Statement To Check A Cell To See If Empty
Jul 10, 2014Trying to look at cell I2 to see if it's blank, has the current expiration date of 9/1/2014, or has an earlier expiration date.
I'm entering in K2 the following: IF(I2="","",IF(I2="9/1/2004","OWES","C")) At this point if the cell is blank it will show blank in K2 but if there is a date it always shows C.
Check On Cell Contents And If Match Change Another Cell
May 29, 2012I want to check the contents of all the cells in S Column to see if it equals "Process Recover/Rebill"
If True, then Change corresponding cell in C Column to "Manual Correction"
I have this VBA and it doesn't look like anything is processing. It appears that I must have something missing in the If line..message about missing.
(tot_new is the number of rows of data) I begin in the 3rd row.
For Counter = 3 To tot_new
If Range("S" & Counter & ").Value = "Process Recovery/Rebill" Then
Range("T" & Counter & ").Value = "Manual Correction"
End If
Next Counter
Conditional Formatting Look At The Cell Contents And Check If The Value Exists In A Range
Oct 17, 2008I am trying to set up a conditional formatting which will look at the cell contents and check if the value exists in a range.
The range to compare will be over multiple columns and multiple rows.
Copy Only Part Of Cells Contents Based On Condition?
Jul 6, 2014I will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)
In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)
What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)
There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.
Macro To Check Part# And Sum
Apr 13, 2006I have a huge spreadsheet that has part numbers and quantity. I need to find the same part number and sum the quantity of that part number.
View 10 Replies View Related"if Any" Function Or Similar: Check A Range Of Cells (B4:B35) And See If Any Of The Contents Are Less Than A Specified Cell (M1) And Then Show A Message
Oct 7, 2006I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.
View 5 Replies View RelatedNested If Statement - Part / Category By Period
Jun 22, 2013I'm trying to nest an if statement across part number and category into a period format but can only manage to get to work if I do on individual category but would like across entire category.
Red
Green
Yellow
Part Number
Amount
Period
Amount
Period
Amount
Period
[code]....
IF Function: COUNT Script In The Logical Part Of The IF Statement
Jun 14, 2009i am using the IF script, and i am also using the COUNT script in the logical part of the IF statement. i need to make sure that both K3 and V3 have a value inside of the cell in order for the statement to work, although when just K3 has a value, the IF - TRUE statement works anyway. any ideas on how to fix this? =IF(COUNT(K3,V3),SUM(K3+V3),"")
View 4 Replies View RelatedCheck Open Workbooks By Part File Name
Jun 27, 2008the Data Grabs and pastes perfectly now but the Macro copies the data from the open file - the problem is that every day the filename (eg stats_01_02) changes according to the date so what I want to know is how to have the macro copy the data from an open file using just the first part of the filename.
View 5 Replies View RelatedCheck Row Contents And Insert New Row?
Jul 24, 2012im trying to check if there is any contents in the row above and if there is insert a new row, if not leave it
*Row1 is the row i want to insert a new row above*
Row2 = (Row1 - 1)
Worksheets("TypesOfChanges").Activate
Worksheets("TypesOfChanges").Rows(Row2).Select
[Code].....
Check Textbox Date Contents?
Jul 23, 2012I need to confirm that a date is entered correctly into a userform.
This code works for a command button, but not for a WorkSheet_Change event.
My textbox is the first in the userform, and needs to be checked immediately, as the labels in the rest of the userform all change to reflect the date that was entered.
What is the best way to do this? I tried a keycode = vbKeyReturn option, but cannot get it to work?
Code:
Private Sub DateCheck()
Dim DateString As String
Dim DateProper As Date
Dim EntryOK As Boolean
EntryOK = False
[code]....
If/Then Statement: "If Cell A1 Of Sheet 1 = "a", Then I Want To Put The Contents Of Cell B2
Oct 27, 2009See the attached example spreadsheet which will make this much easier to understand. I want to create a formula in the second worksheet that says "If cell A1 of sheet 1 = "a", Then i want to put the contents of cell B2 ("flour") into cell A1 of sheet 2, I want to put the contents of cell C2 ("egg") into cell B1 of sheet 2 and I want to put the contents of cell D2 ("sugar") into cell C1 of sheet 2. If not put 0.
View 3 Replies View RelatedIf Statement To Check If Particular Row Is Selected
Jul 18, 2014I have a macro right now which makes a selection and then checks that selection to make sure it has less than 5,000 rows. If it has more, then a message box appears and we end the macro. However, in order for this macro to work properly for me, I need to change the if statement so that instead of checking for the amount of rows selected, I only need it to check if ROW 2 is selected. Is this possible? If not, can we have an IF statement to check the contents of ROW 2 (Row 2 is my header on the worksheet and will never change)?
Here is the code I currently have: [Code] ......
If Statement (check Syntax)
Jan 24, 2010I want to check something syntax wise about IF Statement
My line of code is as follows
IF Statement Text Check?
Jul 31, 2014I need to check if the value in cell A1 contains a certain text, I am using IF(A1="*test*","Y","N") but it does not seem to do the job.
View 2 Replies View RelatedUsing An If Statement To Check If A Sheet Already Has A Name
Jun 1, 2006so i have a list of names. the code i have is able to add new sheets to the workbook. but i need the code to be able to run and check all the other worksheets in the workbook to see if that person already has a worksheet. if he/she has a worksheet then End If and go on to the next name.
Sub AddSheetWithNameCheckIfExists()
Dim ws As Worksheet
Dim newSheetName As String
Dim row As Range
Dim x As Integer
Sheets("data").Select
Range("Agent_name").Select
ActiveCell.Offset(1, 0).Select
Range(ActiveCell, ActiveCell.End(xlDown)).Name = "employees"
x = 0
For Each cell In Range("employees")
For Each ws In ActiveWorkbook.Worksheets
newSheetName = ActiveCell.Offset(x, 0).............
If Statement With Command - Check Results
Nov 28, 2012I am trying to create an if statement that would check the results of a drop down menu and return a command to the user to enter certain information.
I created a drop down list, offering a list of projects 'a', 'b' or 'c'. I then created an if statement in the next cell. If user chooses project 'a' then the cell will return the project number associated with the project. The issue I am running into is that if the user chooses project 'c' in the drop down I need the cell to return a command for the user to enter the project name in the cell rather than the cell return the project number. How do I do that?