I'd like to compare two cells, and if the first cell is either >150, <161, OR =165 AND the second cell is ="E" to output a 1, and if false, output a zero.
I have =IF(AND(AND(Sheet1!B3>150, Sheet1!B3<161, Sheet1!B3=165 ),Sheet1!E2="P"),"1","0")
But i know that is incorrect because Sheet1!B3 can not be greater than 150 AND less than 161 AND = 165. I can't figure out how to make it >150 AND < 161 OR = 161.
I want to compare a cell with a number of other cells to check if their value is the same. If it is the same an IF function will perform some action.
For example I want to check if A23 is equal to B23,B24,B25.....B50
Something like IF (A23= B23 to B50,"hi","bye")
The problem is that I dont know how to write "B23 to B50" in a format Excel will understand.
I need a formula for: If cell c is greater than 0 and cell c is<> cell b return value of cell c in cell d; else value of cell b in cell d.
View 4 Replies View RelatedI need a formula that will look at cell A1 and compare it against column B, if it finds it, show that value, if not, show "not found".
View 6 Replies View RelatedI am trying to add a third if statement to my existing code looking to see if a cell in a column is blank and the corresponding cell in another column contains a number that is greater than or equal to 1. I can't figure out how to write that part of my IF statement.
If Cells(r, 4) = " " And Cells(r, 3) >= 1 Then
Cells(r, 1).Resize(1, 5).Interior.ColorIndex = 35
Set rng = Union(Cells(r, 1), Cells(r, 3), Cells(r, 4))
rng.Copy
Worksheets("Sheet1").Range("G40:I40").End(xlUp).Offset(1, 0).PasteSpecial (xlPasteValues)
Application.CutCopyMode = False
Cells(r, 5) = "NEW"
End If
Next r
I am trying to compare two cells and if they match then I want to fill in a list on sheet one from sheet two.
I have the absolute working when I compare one cell to one cell, but I can't get it to compare one cell to a range of cells (two weeks of days)
Here is the absolute one I have working:
=IF(C1='Data Sorted'!A1,'Data Sorted'!A2,"")
Here is what I tried that doesn't work:
=IF(C1='Data Sorted'!A1:N1,'Data Sorted'!A2,"")
I have three cells - A1, B1, C1 and each contains a value of yes or no.
If more than two of the cells say "yes", I want the fourth cell (D1) to display "yes."
If less than two columns say "yes", I want the fourth cell (D1) to display "no" .
I've a spreadsheet and I need to find cells in Column A that contains certain text and subsequently being able to compare the data in 2 other cells (column F and Column J) and post the results of comparison in Column L. Please see the tables below:
In this table, if Range("A1") contains abc, then data in Range("f1") would be compared against Range("J1"). If F1 = J1, then Range("L1") would say "ok" otherwise "needs to check" as in Rows 2.
Please note that the amount of data varies daily.
ColumnA
Column F
ColumnJ
Column L
abc
fff
fff
ok
abc
fff
ggg
needs to check
bbb
fff
fff
I have a if function that i am creating in excel 2000, and it has 8 variables. I am trying to put it in a macro as it is not working as a nested if function. Here is the current if function...
=IF(B2=C2,"OK",IF(B2=D2,"OK",IF(B2=E2,"OK",IF(B2=F2,"OK",IF(C2=0,"OK",IF(D2=0,"OK",IF(E2=0, "OK", IF(F2=0, "OK", "INCORRECT"))))))
the excel file is attached for further clarity
I have two sheets:
- sheet 1 ('current')
- sheet 2 ('31May')
The data in column C is the same, although sorted differently and can't be re-sorted to be the same. Where the data in column C is the same in both sheets, I want to fill columns A and B into sheet 1.
I have a workbook with tons of programming I need to achieve. Here is my work book so it can be viewed.
Right now on "Protocol" Sheet I want the cells with the "Protocol 1" field to look at Admin_Panel Sheet and find the row with the same text. Then take the text in cell A of the same row and copy it to the cell below the "Protocol 1" listed on the protocol sheet.
I have two sets of data to compare. One is real world data, the other is forecasted data. I have real daily data for every day over about 3 months. The predictions though, there may be 4-6 predictions for ever one real daily value.
What I'd like to do is have a function that looks at Column A's date (real daily value) and Column C's date (predicted data) and if Column C equals Column A, then divide corresponding data in Column B by value in Column D.
In the attached excel file I have two macros that create hyperlinks:
1. BalloonToNumber - Creates hyperlinks from "Oval" shapes on sheet "Op60_1" to sheet1 (column D).
2. NumberToBalloon - Creates hyperlink scheme from sheet1 (column D) to sheet "Op60_1" "Oval" shapes.
In Q #1 my macro seems to skip some shapes on sheet "OP60_1" and I simply can not figure out why.
In Q #2 my macro creates hyperlinks to shapes that do not exist and hyperlinks to numbers that are not a "100%" match, IE: 182 and 82 would share the same hyperlink?
If you open the workbook and use the hyperlinks on sheet1 they will take you to sheet "Op60_1" and shape hyperlinks from sheet "Op60_1" take you to sheet1. On sheet "Op60_1" there are some red arrows indicating the shapes that get skipped when running the "BalloonToNumber" macro.
Shape color changes as the hyperlinks are selected from sheet1.....
So I have a sheet with 600 or so rows of data on a sheet called "Agent_Summary". On another sheet in the same workbook I have a list 20 peoples names. I am trying to find a way to look at the 600 or so lines on the Agent_Summary in column A and see if the name in that cell matches any of the 20 names from the "Team" Sheet. If the name on Agent_Summary is not found on the "Team" sheet then it clears the contents of that cell and moves on. Then it comes back and Deletes the blank rows. I can make it look for any 1 of the 20 names and the code works fine. How do I turn it into something that will look for any of the 20 names?
Here is my code to look for 1 of the 20 names that works great.
Code:
Sub Clean_up_Agent_Summary()
Dim Cell As Range
Dim R As Long
Dim RE As Object
Dim Rng As Range
Set Rng = Worksheets("Agent_Summary").Range("A5:A600")
Set RE = CreateObject("VBScript.RegExp")
[Code]...
"Worksheets("Team").Range("A5")" is where my 1 name is and the rest are just below that. I am thinking some kind of an Array but I am stuck on getting that set up and working right.
i've put this previously on here with no results. There is a formula already in there though does not work because what I want to achieve is to have Column A & Column C to Match Column E & Column F, to Return the Value YES or NO. I’ve Highlighted in ROW 947 one that should Say NO yet Says YES.
View 3 Replies View RelatedI have two cells which contain text, and I'd like to use IF function to compare between them. Something like: =(IF(A1=B1),"TRUE",FALSE"). But it seems like the function cannot do it with text..
View 3 Replies View RelatedI would like to compare 2 cells, Sheet1!B2 and Sheet1!B3
(
If sheet1!b2 is between the values of "D101" AND "D105", OR EQUAL TO "D201", OR EQUAL TO "D203", OR EQUAL TO "E110", OR EQUAL TO "E111", OR between the values of "H107" AND "H110" OR between the values of "H107" AND "H110" OR between the values of "H203" AND H205
)
AND
(
if sheet!b3 is EQUAL TO "E" )
then output a 1, if not, output a zero
The formula, which I deleted, excel reports back as being too long
I want to compare the value of D8 to the value of the last cell in Column D with data. I have the following code but am stuck! (This is code that I was writing from scratch and may not actually work)
Code:
Dim myRng As Range
Dim C As Range
Dim lr As Long
On Error Resume Next
[Code] .........
I am stuck on the "Else" statement...If they don't match then change the color of cell D8 if they do match I want to do nothing.
I want to do is create a function that will allow me to compare various cells. For instance, we have people scoring applications and I want to see if raters' ratings are within 10 points of each other. If raters differ by 10 points I want to print conf call on my spreadsheet (so I can schedule a conference call for raters to discuss the 10 point difference). If raters are within 10 points then I want to print "compute mean" (so I will generate a mean for each applicant).
I can get Excell to compare one rater against another (=IF(C3-C4>10,"conf call","calculate mean"), but I do not know how to make it compare all raters. For example, I have four raters and I want to be able to compare rater 1 to rater 2 and rater 1 to rater 3 and rater 1 to rater 4 and then rater 2 to rater 3 and rater 2 to rater 4; and lastly rater 3 to rater 4. Then if any rater dyad is different by 10 points I want to print our "conf call", but if there are no differences (by 10 points) then I want to print our "compute mean".
I converted a very large PDF to Excel. I want to run a logical formula that will compare a mailing address and property address. My formula goes like this: =if(a1=b1,"yes","no"). However, when I run my formula I am getting False for every line even though I can plainly see the answer should be yes. My guess is that it has something to do with the formatting of the text inside the cells that I'm comparing but they seem to be formatted the same. The strange thing is that if I manually type the information and run the formula, it comes out fine. I have more than 37,000 lines of text so I cannot manually retype the whole thing.
View 4 Replies View RelatedI am trying to code for the following conditions and will like to know how I can embed these conditions into one statement.
IF(AND(X>365, A>B), C*D
IF(AND(X>365, A<B), E*F
If neither of the conditions apply, then 0.
I'm trying to match and make judgement for my excel file and return as "OK" or "NG"
Eg.: New Picture.png
I am doing research and I have a list of over 100 small dna sequences that I would like to see if there are any similarities between them. I have put them in individual cells but I dont know how or what function to use.
View 11 Replies View RelatedI've got a very big spreadsheet with over 40,000 lines.
The text is sorted alphabetically, and on its side I'd like to have a column displaying how different it is from the cell above.
Example:
A1 - Mediterranean Sea. -----
A2 - Mediterranean Ses. ----- 5.55%
A3 - Atlantic Ocean. ----- 100%
Basically, 'Atlantic Ocean' is 100% different from the cell above, but A2 has only one letter different (out of 18, including the space and the dot) compared with A1, so it's only 5.55% different.
This would help me find which cells that are supposed to have the same content, have errors and thus are slightly different.
I have multiple colums that I want to compare (A=F), (B=G)........
I want to see the difference of the two as shown in Blue column (example file is attached.)
Skærmbillede 2012-12-13 kl. 18.37.15.jpg
I am trying to write some code that will compare three cells on a row and if they match then it will delete the row.
Column U-has Y, N entered
Column V-has Y, N entered
Column O-has 1, 2, entered (some cells may have the fill color set to red)
I need the macro to look at Column U and Column V and for example if the cell U2 has a N, and V2 has a Y then the macro would look at O2 and it there is a 1 with the fill color set to red the macro will delete that row.
The spreadsheet will vary on how many rows it contains. It can contain up to 5,000 rows and the macro would need to go through all the rows.
I need to create a micro that can compare the value of the cells and if it is the same, it will merge. currently my code is ......
View 11 Replies View RelatedIs there a way to compare two cells to see how many
numbers are same?
For example, A2 contains 16, 17, 19; B2 contains 16, 17; and I want to put
in C2 the result 2.
I will like a macro to compare row one to row one on sheet 2 column A. If the number is the same then it will compare from the same row column K from sheet 1 and column m from sheet2. If it is less then copy to sheet4 and highlight in red, if more than highlight in blue and if equal green.
View 6 Replies View RelatedSome data
In Cell A1 This is a bag
In Cell B1 This is a bag with books
now in Cell C1 i need the mismatch words With books
C1 should show with books
I am now manually finding the words of cell A1 in Cell B1 and then writing the mismatched words C1 .