Transfer Data Between Userform.
Oct 30, 2009
I am trying to transpher data between two userform.
The Idear, To store information within a list box on a userform and select what list items "information" is to be copyied to another useform's Textbox.
To have the 1st userform with a Text Box and one Button. When the user click the button the userform containing the listbox " information" is displayed. On this form the user can select an item "Information" that they want to be transphered into the other useform's textbox. (any information that is going into the textbox must only be added to the textbox information as a new line)
View 11 Replies
ADVERTISEMENT
Feb 15, 2010
I am working on a Userform that will take the values entered in the first two text boxes (values for Columns A and B), enter them into the spreadsheet, and then display the values for the data in columns C and E in the next two text boxes. The data for columns A and B must be entered first since Columns C and E contain functions. And then, when the end user is finished for the day, I want them to be able to clear the values in columns A and B (which I have this part) Also, the data in column B will almost always be the current date, so I am not sure if that can be automatically populated on the userform or not.....I have played around relentlessly, so I know that I have really messed up the code I DO have, but here it is (I know it doesn't make any sense).
Private Sub Document_New()
frmUSAASLADate.show
End Sub
Private Sub cmdPickDate_Click()
frmCalendar.show
frmUSAASLADate.txtRcvdDate.SetFocus
End Sub
View 5 Replies
View Related
Jan 4, 2007
I created UserForm for people to enter there details into this form. I designed it ok, but i need it to, once it is filled in to copy what is entered onto a page in the spreadsheet.
So someone enters there details into a form that appears but then i need their details to appear on the spreadsheet at the click of a button.
View 3 Replies
View Related
May 7, 2009
I have a range of data that is compiled from various cells that I have named as Range1. I then have another named range - Range2 which should be items selected from range1 and copied into range2. This is to enable other work to take place.
I have created an example userform with Range 1 shown but do not know the code to copy it over using a command button. Range 1 should not change. Also vice versa if possible i.e. remove the selected item from Range2 with another button.
View 5 Replies
View Related
Mar 18, 2013
I am working with several userforms and try to transfer data obtained in one userform (lets call it Userform1) to another (Userform2).
Specifically, the idea is to have a commandboxA where the user can choose several options and the selection will define a string, and I want to use this string in Userform 2 to define a text.
Example:
The user chooses "solid" in the commandbox and I define the string as "rock"
Dim structure As String If commandboxA1.value = "solid" Then structure = "rock" etc...
And in Userform 2 I would like to combine the string structure with other strings, e.g.
If commandbox.value = "example" Then example text = "example text@ & structure & "text"
However this does not work, because the string which I have defined in Userform1 is not defined in Userform2. How would I define the string specifically, such that I have access to it in both userforms? How can I define the string as public? I tried several times, but could not get it to work.
View 3 Replies
View Related
Mar 17, 2014
I have created a userform and it works fine.Following code is assigned to commandbutton to transfer data to sheet "FT".
[Code].....
I want to add that : If value in combobox2 is “ KT” then all entries are copied to sheet3
Otherwise copy everything in sheet”FT”
Other parameters remain same.
View 4 Replies
View Related
Mar 14, 2014
I have a User form with a combo box that is populated with numbers (1 thru 50) and four text boxes for first name, last name, email & cell number.
It all works fine. However: I would like it to transfer the data to (Sheet3) in numerical order... In other words, If the user picks number 5 his data would be entered in the fifth row.(or sixth counting header). Or if he chooses number 37, his info would be entered into row 37 (38 with header) of (Sheet3)
It currently populates the next empty row.
My code is below, How would I modify it to accomplish this?
Code:
Private Sub EnterButton_Click()
'Populates GetNumber Combo Box
Dim w As Worksheet, x As Long
Set w = Sheets("Sheet2")
x = w.Columns(19).Find(Me.GetNum.Value, lookat:=xlWhole, LookIn:=xlValues).Row
w.Range("S" & x).Delete
[Code] ............
View 2 Replies
View Related
Jun 1, 2007
I am trying to create a userform to allow user to register their new team member. In the userform, I have textbox1 (new team member) & textbox2 ( name of their leader). Once both the textbox has been filled, the user need to click on the commandbutton, which will then add the newly registered team member to the combobox1 in the Sheet1 and then create a spreadsheet(tab with the Team member name) in a separate workbook, which corresponde with the name of their leader (as filled in textbox2 in the userform.
View 2 Replies
View Related
May 6, 2008
My question is, instead of deleting the row, how can I use the combobox to replace that row with the updated info rather than delete and resort? I have a combobox that selects names from a sheet, column A and populates itself on Userform activate/initalize. Using the Combobox to select a name, this code below populates all the fields on the form, various text and comboboxs.
When users hits the update button, it currently finds the row and deletes it, see second code example, but this reaks havoc on various parts of the program, I have to move the combobox and add name textbox's because when it deletes the row, the combobox takes on the next rowsource and then writes that info, rather than the info selected.
Private Sub ComboBox1_Change()
If bBlockEvents = True Then Exit Sub
If ComboBox1.Value = "" Then
Reset
bBlockEvents = True
ComboBox1.ListIndex = -1
bBlockEvents = False
Exit Sub
End If
userow = ComboBox1.ListIndex + 3
usercolumn = 1
If userow = "0" Then
ComboBox1.Value = ""
Reset
Else.......................
View 6 Replies
View Related
Jun 12, 2013
i have a userform where when i initialize i load my combo box with a range
I have a variable which = combo box value
Sub cmd click()
myval = cbo.value
unload me
End sub
How can i use or pass this variable to my standard module i.e
Sub test()
myevent = myval
end sub
View 6 Replies
View Related
Sep 5, 2008
I need to create a simple code that will allow me to fill out the userform and then use a cmdbtn within the userform to transfer the information from the userform to specific cell in my excel spreadsheet.
View 10 Replies
View Related
Jul 26, 2007
I have a userform with many textboxes that I am using to collect data which is transferred to a worksheet using a command button on the userform. All data is correctly transferred to the worksheet except for the text box I am using for the date.
The date is transferred from the userform to the spreadsheet but the date is left justified implying that it is text but dates that I have manually entered into the spreadsheet cell are right justified. This may seem picky but I am using a 'count' function within the spreadsheet to determine how many rows contain the date.
I am using the following code which I am entering in the format of dd/mm/yyyy, to to transfer the date to Cell A1 the worksheet 'Results'.
Private Sub CommandButton1_Click()
Worksheets("Results").Cells(1, 1) = UserForm1.Textbox1
End Sub
how to transfer the date to the cell so that it right justified, hence treated as a number within the cell.
View 6 Replies
View Related
Jun 12, 2008
I have two worksheets (Sheet1 and Sheet2).
For example I have three columns named Name, City and Telephone.
UserForm1 has three textbox(TextBox1, TextBox2 and TextBox3).
All three textboxes data populated from sheet1 (Name, City and Telephone) by selecting a comboBox.
The code is below... and which is working fine.. The problem is in my next code. I am trying to amend data in all worksheets but it is not working.
Private Sub ComboBox1_Change()
Dim strNamedRange As String
Dim lRelativeRow As Long
With ComboBox1
If .ListIndex > -1 Then
strNamedRange = .RowSource
'ListIndex starts at zero
View 9 Replies
View Related
Jan 25, 2014
In sheet lists I have a list of names and to the next column, I use 0ne 0f these threee options 1/3 OR 2/3 OR O(zero). So what I need is this When a user choose name from the combobox and then type numbers in textboxes, I d; like these numbers to transferd in data base column M, but if number of the specific customer in Lists Sheet is 2/3, then the 2/3 of the choosen numbers should transferred rounded to the nearest biggest number. Example: If I choose Maria, and type 30--10--15--25--40, in text boxes, then numbers 20---7--5-17--27, should transfer in database column M.
If i choose Stevens, then numbers should tranfered as ii is. No chance.
View 10 Replies
View Related
May 6, 2009
I want to select items in a listbox and transfer those items via command button in a textbox. The listbox is already filled. I have no idea how to realize that.
Attached is the form I created so far. I copied everything together and matched it up for me. It's probably not the best way but it works. I marked the section where I need help in yellow.
View 9 Replies
View Related
Aug 14, 2014
I use excel and would like to know how to copy a large volume of address data but at the same time filtering out irrelevant data placed under each other in a row, in this case, air compressors air conditioning web address etc ( see below for example). I need the first 5 lines only. The rows of unwanted data are irregular i.e some have 10 lines, others 5 , and others 2 or one line which makes using a formula difficult as there is no consistency. The data eventually need to be placed horizontally in columns to be compared to other address lists. To make matters worse, the text data has been merged and wrapped.
BDD LIMITED
3 Telford Place
L*****r QLD 4315
Phone: 07 5777 3622
View 14 Replies
View Related
Feb 4, 2010
I have a spread with five tabs. Each tab is a person's job responsibilties for numerous properties. Each person works with a property called Orange Avenue. I want to create a tab for JUST Orange Avenue items but want it to automatically pull any and all info from each tab where that person's Ornage Avenue duties are.
View 9 Replies
View Related
May 17, 2007
cells(a,b):cells(a+4,b) have 1,9,9,0,5
cells(a,b+3):clells(a+4,b+3) have 1,9,0,emtpy,empty.
how to fill 9,5 to empty cells.
View 7 Replies
View Related
Jan 20, 2007
I'm trying to convert this code so it transfers the data without the input box being needed.
Dim response As Long
Dim strLastRow As String
Dim rngC As Range
Dim strToFind As Variant, FirstAddress As String
Dim wSht As Worksheet
Dim rngtest As String
Application.ScreenUpdating = False
Set wSht = Worksheets("Transfer Sheet")
strToFind = Application.InputBox("Enter Your Initials")
If strToFind = False Or strToFind = "" Then Exit Sub
With ActiveSheet.Range("H2:H5000")
Set rngC = .Find(what:=strToFind, LookAt:=xlWhole)
If Not rngC Is Nothing Then
FirstAddress = rngC.Address
Do
strLastRow = Worksheets("Transfer Sheet").Range("A" & Rows.Count).End(xlUp).Row + 1
rngC.EntireRow.Copy wSht.Cells(strLastRow, 1)
Set rngC = .FindNext(rngC)
Loop While Not rngC Is Nothing And rngC.Address <> FirstAddress
End If
End With
View 12 Replies
View Related
Jan 23, 2009
I have to workbooks and I want to populate one of them with data from the other. The receiving document has the fields Account and SubAccount which I need to match up with the account and subaccounts in the other workbook.
However, in the other workbook, the line looks like "1000 Wages 000001" (which is account, name, subaccount). I can't find out how to have my receiving document scanning the providing document and when it finds an account and subaccount (in the above string) that matches the account and subaccount in the receiving document, to bring over the data.
View 2 Replies
View Related
Feb 15, 2009
From the attached spreadsheet I need to transfer all the rows where the issue status in column T is either ongoing or open. Now I know how to transfer them over if row 1,2,3 etc was going into row 1,2,3 etc into the new spreadsheet but as not all rows from this sheet is going over I need to now how to transfer data so in the new spreadsheet it just follows down rather than have spaces in it. i.e. if on this sheet I need to transfer data from rows 1, 5, 10, 15 on the new one they go into row 1,2,3,etc
View 7 Replies
View Related
Apr 4, 2009
Theres one master table. Two columns in master table are titled Name-1 and Name-2, and all columns in front of it carry Properties corresponding to these names.
In a second table, when we choose/type the Name-1 and Name-2, corresponding properties should automatically be picked up from the master table. Is that possible?
View 12 Replies
View Related
May 13, 2013
I have a sheet with 1250 data. All are in Column "A" I want to print them out and therefore would like the data also in Column "B" and "D" in order to save printing paper and make it easier to search. Since the data is alphabetical sorted, doing it manually is a big job.
View 6 Replies
View Related
Sep 26, 2013
I have a new spreadsheet that I made to give us the break down of each invoice we create. what we want is to see each job that is done (by code), the amount we charge per each, the cost of goods per each, and the profit margin. In this spreadsheet I have two tabs. in tab one it has the form I made that has a place to input the data that will change with each invoice as well as a section that is broken down into columns. In these columns I have it listed this way. CA=Job code, CB=Job Description, CC=how many, CD=Charge ea., CE=rate total, CF=COGS ea., CG= COGS total, CH=profit
I have the formula done for all of the math the get the totals. My idea was to make a second tab. In tab 2 I have everything listed in columns that will go into tab one. It is broken down like this. CA=Job Code list, CB=Job Description list, CC= charge ea. CD= COGS ea.
What I want to be able to do is when I type in the job code in the first cell under the column A on tab one, it will bring over all of the info from tab 2 and put it in the right spot for that code. So if I typed in say TT001 in that cell it would bring over the description matching that code and put it in the cell under B, along with the charge in column D, and the COGS under column F. And I want it to be that way for each code I type in and it will be different each time I fill this out. How do I explain this part? Ok so I a new invoice made its # 22. I take this spread sheet and do what I want and get all the totals so I print it out. I then want to be able to clear all the info and or just type in a new set of codes that will be on invoice # 23 and then #24 etc.
So what I am saying is the codes will be different each time I fill it out. that's why I have them listed on a different tab and will just put them in tab one long enough to get the total and print it out. Is that clear as mud? I will stop here and wait and see what questions I get back.
View 7 Replies
View Related
Jan 30, 2014
I have a program I built and need to transfer data from a form, from workbook "C" to another workbook "W". The workbooks are open by different users . 90% of what I locate on the Web pertains to worksheets and what don't, does not work. The folders are stored in my Public Documents.
View 4 Replies
View Related
Mar 19, 2014
How to transfer data from one workbook that's open to another in a macro form. I included two sample data workbooks I have. Sample will have the macro inside it and will already be open for the other portion of the macro that will be running. I already have code that will open up the Sample2 file. I'm trying to take specific data from Sample and paste it into a summary sheet in Sample2. In Sample i will be cycling through roughly 30 sheets to find this data but I only included one because I just need to know the basics on how to make this work and then how to modify it.
Sample2.xlsx Sample.xlsx
View 4 Replies
View Related
Mar 26, 2014
i need the data from columns D & E on the JOKE sheet to be transferred to columns F & G on the sheet called MY PRODUCTS...
you will see that the products may have slightly different names but the product codes (column C on the joke file and column E on the my products file) are always the same.
i want to just click a button and add the data from sheet 2 tab to the columns on sheet 1 tab.
my products.csv
joke.csv
View 1 Replies
View Related
Oct 29, 2008
I'm trying to get my code to search through some information and transfer the data from one sheet to another. Trying to find out why my code isn't working. I keep getting errors...
Here is the code I am having trouble with...
View 7 Replies
View Related
Dec 24, 2008
I need to transfer a large amount data (~2,5 million lines of data) from one spreadsheet to another while making sure the destination file is kept in a certain format.
Spreadsheet "oxno" is the file that needs filling out with data provided to me in spreadsheet "ox"
The value that is the matching criteria will be the ITS account number (Field B in "ox" and field A in "oxno") and the currency (Field B in "oxno" and field G in "ox")
So I want a macro to look in "oxno" and use field the values of field "a" & "b" and search for the them in "ox" in fields "B" & "G". Once it finds a match it should copy the value of field "I" in "ox" and paste into field "n" on "oxno".
The next data to be copied should be what goes into field "O" in "oxno" this data is derived from field "L" or "M" but only when its of numerical value with one non numerical field in it (usually a "/"). Last value that I need copied over is Field "T" on "oxno" this is derived from field "J" or "M".
I realise the potential conflict because two sets of queries will be looking to gather values from field "M" on "ox". That is why I am hoping when we look for value for field "O" in "oxno" we only look for numbers with one non numerical field in it (usually a "/") .
After finishing writing this up, I realise how wordy this has become appologies for that, but hopefully someone will be able to understand what I am looking to achieve and will be able to suggest a solution.
View 14 Replies
View Related
Mar 17, 2009
on the "all data" sheet, there are two rows that have a Y for file missing - these are to be marked, so that they may be focused on finding their file
currently, i am doing as such and then filtering by that column to print out a list, and would like a simplified solution (populate sheet "missing") with just those rows who have missing files - so that another user may easily view such data without having to fondle around with the master list
View 2 Replies
View Related
