Transfer Details From One Sheet To Another?
Jun 18, 2014
I am trying to transfer information for the 'Master CCO CCB Document List' tab into one of the other tabs ('In Progress' and 'Complete') based off of the status. If the status is Complete, Approved, Declined will transfer to the 'Complete (Approved or Declined)' Tab. If the status says 'On Hold, Pending, 1st & 2nd Session Review needed will transfer to the 'In Progress (On Hold-Pending)' Tab.
I want the master list to house all of the entries, so when the status changes it is just copied to the other sheet and not cut and pasted.
On the 'In Progress' tab, once the status changes to Complete, Approved or Declined I would like for the item to be cut and pasted into the 'Complete' tab,
I'm stumped and really not sure if this will work properly. I've tried everything and now I can''t figure out how to add the contents from the form to the master list tab.
View 1 Replies
ADVERTISEMENT
Jan 30, 2014
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
View 1 Replies
View Related
Jun 1, 2012
I have a query on array formula
Am using this formula to get the details from master sheet to template sheet
=IFERROR(INDEX('P O Detail'!$D:$D, SMALL(IF('P O Template'!$C$4='P O Detail'!$B:$B, ROW('P O Detail'!$A:$A)-ROW('P O Detail'!$A$2)+2), ROW(1:1))),"")
with Ctrl+Shift+Enter
This is working fine based on the input cell $C$4
What am looking for is ... how to add two more input data $D$4 & $E$4 so that based on these three values I should get the required output.
View 3 Replies
View Related
Aug 22, 2014
I create daily report for dispatch documents to our various branches. Now I am looking for formula (or formula is not possible then VBA code) that will auto update document number and dispatch date in "output" sheet.
Find attached sheet with desired output.
View 5 Replies
View Related
Oct 15, 2008
I have a workbook which I use for invoicing customers. Sheet one is the inovice template. Sheet two is the contact details of all my clients (i.e. column headings are Name, Address 1, Address 2, Town/City etc.).
In the invoice sheet I would like to be able to select the name of the client from a dropdown so that it automatically fills in the address into the other cells of the invoice.
View 3 Replies
View Related
Nov 27, 2008
My worksheet is attached. It asks the name whenever we will open this workbook. The same would be written autometically in open by cell with date & time.Then it ask "whether its new project or not"? If yes then then approved by cell & date-time would be blanks or if no then it will show the last approver's name, date & time. I need whenever anyone approve this in case of NOT NEW Project so the name of the approver & Date & time should be recorded in the another sheet name "record" along with the sr. nos. But the record will be blank whenever we will select "yes" in "whether its a new project". I want to make it password protected & password is "007".
View 14 Replies
View Related
Dec 14, 2007
I have in Sheet 1, in column A, the list of employees who are existing, in column B their mobile numbers and in column C the amount of mobile usage for the month June 2007.
In Sheet 2, in Column A, I have the existing list of employees of June 2007, some new employees who have joined, in Column B their mobile nos. and in Column C, amount for July 2007.
Similarly, for August, Sept. Oct. 2007 etc. In each sheet, the old employees are copied and new ones are added alongwith their details. It so happens, some employees leave the organization in between in August, Sept. or Oct. 2007.
Now, I want to extract in column A, the list of all the employees who were existing initially in June 2007, who have joined later on and who have left in between, their corresponding mobile numbers in column B and their amount in column C and show them monthwise in one single sheet side by side. E.g....
View 9 Replies
View Related
Jul 6, 2007
I have a work sheet(sheet1) that contains 700 people's information. Each row contains information for one person. Let's call the first person A. I have to copy certain columns of person A's response to another work sheet(sheet3) in the same file. Then, copy person A's e-mail address and save the sheet as person A's e-mail. Repeat the same steps for the next respondent.
I have created the macro for person A already (including the saving part). Now the question is how to write the loop in the macro.
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 7/5/2007 by Jean Kuo
'
'
Range("Q4").Select
ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C[-4]"
Range("Q13").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-9]C[-14]"
Range("Q14").Select
Sheets("Sheet2").Select
Range("D4").Select
Sheets("Sheet3").Select
Range("Q14").Select
Sheets("Sheet2").Select
Range("D4").Select
ActiveCell.FormulaR1C1 = ""
Range("C4").Select
Selection.Copy
Range("D4").Select
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C17"
Range("C4").Select
Sheets("Sheet1").Select
Range("T1").Select
Sheets("Sheet3").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-10]C[-13]"
Range("Q15").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-11]C[-12]"
Range("Q16").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-12]C[-11]"
Range("Q17").Select
Sheets("Sheet2").Select
Range("F4").Select
Sheets("Sheet2").Select
Range("G5").Select
Sheets("Sheet3").Select
Range("Q17").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-13]C[-10]"
Range("Q22").Select
ActiveCell.FormulaR1C1 = "=Sheet1!R[-20]C[42]"
Range("Q22").Select
Selection.Copy ...
View 3 Replies
View Related
Dec 9, 2009
I was interested in getting Excel to look up details of a person say age and put the details in another table under the correct heading.
E.g. Fred Bloggs age 25
Would look like this
First Name Surname 16-24 25 - 49
Fred Bloggs 0 Tick or something
View 9 Replies
View Related
Feb 21, 2014
On the attached spreadsheet, ormula on 'UserForm2'.
When I hit the 'Submit Changes' button I want a formula so that it will look up the product row in Product List (Sheet 1) that is select in the ComboBox1.
Once this row has been found I want the values in TextBox1 to be copy and pasted into Column D of that row and value of TextBox2 to be copy and pasted into Column G of that products row.
View 10 Replies
View Related
Feb 9, 2014
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies
View Related
Mar 20, 2014
Once a job is complete on a sales tracking sheet I created, it needs to transfer automatically once I click on a "completed" section of my work sheet.
View 1 Replies
View Related
Feb 20, 2014
I'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
View 2 Replies
View Related
Jun 25, 2012
I am looking for a Macro which can transfer data from sheet 1 to the first available empty row on sheet 2.
For example, I have data in the following cells on sheet 1: B2, B4, B6, B8, and B10. I want to transfer this data to the first available empty row into cells A1, B1, C1, D1 and E1 of sheet 2. The cell number is ofcourse depending on the first available empty row and could thus be 2, 3, 4, 5 etc.
I also want to delete the data from the original cells in sheet 1 after the data has been transferred.
View 8 Replies
View Related
Nov 18, 2011
I am trying to create a transfer of data from one worksheet to another, where Column G is where new data will be entered. I have a macro to sort the data (works great!!), but it is just getting it from one worksheet to another without having formulas in the cells - which can be deleted by my co-workers - to pull the data from one sheet to another.
I do not know if this can be done automatically or not, or if info is updated on one worksheet vs another - if then it will transfer the text.
Example:
(A2)LAST NAME (B2)1ST NAME (C2)RES# (D2)HOUSE (E2)DOB (F2)JOB (G2)SPECIAL
(A3)DOE (B3)JOHN (C3)112233 (D3)1 A2 L (E3)10/10/75 (F3)YES (G3)DR APPT
There are over 300 entries - one row new record. The CommandButton1 works great that I have for compiling and deleting unused rows.
But now I need something to get the data to the blank worksheet to compile data from Column G without formulas in the cells. This was one I found online, tried to adjust it to fit what I need, but I cannot get it to work.
Sub CopyRow(ByRef Target As Range)
Dim DstEnd As Range
Dim DstRng As Range
[Code].....
View 9 Replies
View Related
Jun 18, 2012
I am wanting a macro that will open an existing workbook (book2) and transfer information from the already open spreadsheet (book1) to the newly opened one.
So far I have
Code:
Sub email_sheet_and_save()
'ChDir "\sbscompanyfolder1"
' Workbooks.Open Filename:="\sbscompanyfolder1QUOTE LOG.xls"
Dim iRow As Long
[Code] ....
I cannot figure out the code to make the actual transfer eg cell C2 on book1 should transfer to (irow, 1) of book2.
View 2 Replies
View Related
Sep 1, 2009
I have two sheets in excel workbook. Sheet2 has a list of number in col A and the corresponding data in col B C D E F. In sheet one, I want to type a number that exist in col A of sheet 2 and it automatically populate the correspond data in col B C D E F from sheet2 into sheet1.
View 10 Replies
View Related
Nov 16, 2008
I have two sheets, one is named "details" and other is "query". The data in sheet "details" is listed in columns A, B,C, then D is blank and again data is in columns E,F.G. (in text forms)
In the Query Sheet, wish to enter in A1 the value contained in A, B or E, F of "details" sheet, the result of columns C or G may appear in Column B1 of Query sheet and also if value is equal to C or G, the result of A,B, or E,F may appear:
=IF(AI=A1& B1,E1,F1!Details, etc. etc.
View 10 Replies
View Related
Dec 24, 2008
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
View 5 Replies
View Related
Jun 24, 2013
I am trying to transfer a set of values from a column on sheet1 into cells on sheet2. Sheet2 contains labels I made up so the cells I want the values transferred to are not in column format. Is there a way to write a formula so that it will transfer the values indirectly? By indirectly I mean that I want sheet1 a1 to go to sheet2 a1 then I want sheet1 a2 to go to sheet2 a32.
View 5 Replies
View Related
Mar 26, 2014
i need the data from columns D & E on the JOKE sheet to be transferred to columns F & G on the sheet called MY PRODUCTS...
you will see that the products may have slightly different names but the product codes (column C on the joke file and column E on the my products file) are always the same.
i want to just click a button and add the data from sheet 2 tab to the columns on sheet 1 tab.
my products.csv
joke.csv
View 1 Replies
View Related
Oct 29, 2008
I'm trying to get my code to search through some information and transfer the data from one sheet to another. Trying to find out why my code isn't working. I keep getting errors...
Here is the code I am having trouble with...
View 7 Replies
View Related
Apr 11, 2009
I have two worksheets one that has a weekly schedule and sheet2 (daily attendance) where i want to transfer One day at a time but i only need the Job role,employee name and shift for that day, then i need to do the same for each day but i don't want seven sheets. please find attached an example sheet.
View 2 Replies
View Related
Feb 16, 2007
how to make a program on deleting a row/s and transfer the deleted row to another sheet with the use of command button? I also want to have a message box appeared confirming that the row has to be
deleted.
View 9 Replies
View Related
Nov 9, 2006
I have a button on one sheet of my file which should, when clicked, transfer the data in two separate columns to a particular column on another sheet. Until recently this has worked without problem - now however whenever the button is clicked nothing at all happens - this code was written for me, I don't know VBA at all. I attach the code here firstly to see if anyone can see that the problem may exist within it, although there do not appear to be any error messages or highlights:
Private Sub cmdTournament_Click()
Dim s As Range, i As Variant, t As Range, w As Range, _
cc As Range, c As Range, w2 As Range, j As Integer, Val As Integer
Val = Sheet3.Range("Tournament").Value
Set s = Sheet4.Range("Scores")
Set t = Sheet3.Range("Table")
Set w = t.Cells(1, 1).End(xlToRight).Offset(0, 1) 'first empty week
Set w2 = t.Cells(1, 1).Offset(0, 31).End(xlToRight).Offset(0, Val)
Application.Calculation = xlManual 'turn off calculations
For Each cc In s
For j = -1 To 4 Step 5
Set c = cc.Offset(0, j)....................
View 4 Replies
View Related
May 8, 2014
Solve this issue for transfer value from master sheet ( Daily Report) to corresponding sheet and add value according to its Date. E.g. :
Master Sheet : Daily Report
Manpower : 35
I want to transfer the value of manpower to sheet ( D_manpower) and insert value 35 to according to month & date ( C5 & G5) shown in master sheet ( Daily Report )
Like this all data need to insert according to its corresponding sheet according to month and date
File attached : Report 2014.xlsx
View 3 Replies
View Related
Aug 27, 2005
This works fine in detecting and copying the new material number accross to the master data sheet, but now i want it to copy the row in which the new material number is located as there is other information that goes with so it doesn't have to be manually typed in.
Dim MyValue As Variant
Dim FromSheet As Worksheet
Dim LookupColumn As Integer
Dim FromRow As Long
Dim FromColumn As Integer
'-
Dim ToSheet As Worksheet
Dim StartRow As Long
Dim LastRow As Long
Dim ActiveColumn As Integer
Dim ReturnColumnNumber
Dim ToRow As Long
Dim FoundCell As Object
'================================================= ============
'- MAIN ROUTINE
'================================================= ============
Sub DO_LOOKUP()
Application.Calculation = xlCalculationManual
'----------------------------------------------------------
'- LOOKUP SHEET [**AMEND AS REQUIRED**]
Set FromSheet = Workbooks("Book1.xls").Worksheets("MD")
LookupColumn = 2 ' look for match here
FromColumn = 2 ' return value from here
'-----------------------------------------------------------
'- ACTIVE SHEET
Set ToSheet = ActiveSheet
ActiveColumn = ActiveCell.Column................................
View 14 Replies
View Related
Jul 10, 2009
I am wanting to create a spreadsheet for my stationary orders with some macro's and I have no idea on how to set this up. All the product information will be in Sheet 1 and the Order Form will be in Sheet 2 of the document.
In "sheet 1" we will make a list of all items that get ordered on a regular basis. This can be up to 500 items but
I have given you an example of 6 to play with.
We need the "QTY", "Unit Price" & "Total" in both "Sheet 1" and "Sheet 2" to sum up with a formula
Once the user has chosen the line item they will click on the "add" button next to the line item.
This will inturn take that particular line item and insert only the "Code", "Product", "Unit Price" & "Total" columns in "Sheet 2"
and leaving out the "Page Number", "Item Number" & "Description" & "QTY" fields to Sheet 2 (Order Form)
The user will manually change the "QTY" field on the "Sheet 2" (Order Form)
When the user selects another product and clicks "add" then this new line item will be added below the first line item
on Sheet2 (Order form) and so on.
We will probably only be ordering 10 - 50 items each time so we wont need a huge list on the order form (Sheet 2)
View 9 Replies
View Related
Dec 27, 2008
I have 2 different sheets one is my check book register and the other is a summary page. Both have different categories for example [sheet 1 "register" (gasoline = A) (food = F)] [sheet 2 "summary" (Auto = A)
I think this is how I want it but I need this to work no matter what category my debit or credit falls in. If date is "January" and category is "A" then copy "debit" to sheet 2 under January Auto. then sub total all as designated on second sheet.
If date is January and category is "m" then copy debit to sheet 2 under January mortgage, then subtotal as designated on second sheet. I have attached an example of my spreed-sheet so far as you can see I am struggling getting the amounts to go into the correct categories. Also sometimes there may be more than one of the same type of transaction in the same month they need to be able to go into the same cell and be totaled as well.
View 2 Replies
View Related
Nov 25, 2013
I got one excel document with a graphic that i want to be seen on a other excel document. But the data on that graphic must be able to mutate with the original excel document. It is just to function as a dashboard. How can i fix that.
View 1 Replies
View Related
