I have a code that will look in column C for all rows with data, turn on autofilter and copy the data into column A.
Then do the same in column D, paste into column A.
And finally the same in column E, paste into column A.
But I think the autofilter turning on and off might be a problem.
Code:
Sheets("PP").RAnge("A2:A50").ClearContents
Dim LastRow1 As Long
RAnge("C1").Select
[Code].....
i have a userform that uses auto filter the filter the search results. I am wondering if someone can show me how to turn the auto-filter off once action (printing) is completed.
below is the code I am using:
Private Sub CommandButton1_Click()
Dim ws As Worksheet
Set ws = Sheets("ComplaintData")
With ws
.AutoFilterMode = False
With . Range("A1:L1")
.AutoFilter
If ComboBox1.Value = "Month" Then
.AutoFilter Field:=11, Criteria1:=ComboBox2
Also, I was given a code in this forum to handle the "Item not found" situation. Where would I insert it in this code. If the searched item doesnt exist, then I would like the message box to come up before it shows the printer selection box and if the searched item exists then directly show the printer selection box.....following were the two lines
On Error Goto ErrFindClick
ErrFindClick:
MsgBox " " & combobox1.Value & " Not Found!"
Exit Sub
I have a workbook which is set up to take an average heart rate of a participant from a series of data points. I have set the spreadsheet up before I have collected some of the data. (so I can review the project at the 3 months period and its an ongoing project).
The problem is that if there is no data in a participants column then excel correctly gives you readout of “#DIV//0!”. On my results page this #DIV//0!” makes it hard to read the spreadsheet. Is it possible to get excel to turn #DIV//0!” to “0” or even turn it to a blank cell?
can I set a cell in excel so that if a number in a different cell is above a certain number it will turn green and another cell to turn red. I have attached the file.
View 4 Replies View RelatedIm sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedI can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedI'm going to turn the F1 key off in my spreadsheets so that I do not hit it by accident so manytimes, but how do I bring up help without it?
View 5 Replies View RelatedI have attached a sample file. All the data is inserted into this file via a text file, except one column "G". Someone in this forum was kind enough to help me in being able to include the city name 'G' to a parcel number 'A'. However, the page is constantly trying to complete 'Calculations' and won't let me do anything without first hitting 'Control Break'.
This is fine except that when I try to save the file into .txt, I don't have the option of 'Control Break' and I have to end up closing the file. As the 'real' file has over 100,000 rows, nothing happens very fast. I have tied changing the 'Calculation Options' but that doesn't seem to change anything.
The use of * as a wildcard in excel can be extremely useful, however, can it be turned off? I work in the education sector and am currently number crunching GCSE results. When it comes to calculating A* grades versus A grades, B grades, etc, I cannot seem to do it because of the wildcard.
Is there a button in Excel you can press that will turn gridlines on/off rather than going through the tools/options/gridlines route?
View 6 Replies View RelatedWithout using VBA can you suppress alerts in Excel?
Specifically when you are creating copies of many sheets in a workbook,
"A formula or sheet you want to move or copy contains the name "Month", which already exists on the destination sheet. Do you want to use this version of the name?"
The reason for turning the alerts off is that the answer is always yes and it appears too many time in this workbook.
How can I silence the annoying beep heard whenever a msgbox pops up or an error box appears?
View 9 Replies View RelatedI have a spreadsheet that is a timed test. One of the people taking the test accidently hit Control-F4 which closed the file and ended their test before the time was up. Is there a way I can turn off Control-F4 without turning off other keyboard functions?
View 3 Replies View RelatedIn Column 'A' I have part numbers. In Column B I have suppliers that supply that part number. My report drops into excel as per the below table. My issue is if a part number can be supplied by more than one supplier it duplicates the part number in Column 'A' based on how many suppliers can supply that part number In Column 'B' it will list each supplier for that part number In the table below you can see that part number 1122 can be supplied by supplier 'ABC' and also 'DEF' - Part number 9966 can be supplied by 3 different suppliers so lists the part number 3 times in Column 'A' and in column 'B' it lists each supplier i.e. 'TUV', 'WX' and 'YZ'
What I want to be able to do is the suppliers in Column 'B' be listed in the cells to the right of the part number and dupliactions in Column 'A' be removed
'A' 'B'1122
ABC
1122
DEF
9966
TUV
9966
WX
9966
YZ
I am working with a spreadsheet created by someone else. I am trying to change a date in the spreadsheet from "12/19/07" to "5/1/08". When I type in the new date, excel assumes that I am entering a formula, places an "=" in front and displays 1/1/1900.
I can open a blank spreadsheet, type in the date "5/1/08" and copy it into the cell in the existing spreadsheet and it reads it as a date just fine.
I've browsed the net searching for a solution to my problem and found one solution altough not entirely what i was after, but it was very close. It was provided on another forum, of which i'm not a member.
[url] ...
I have a TAT target of <= 2hours, however this is complicated by weekends, holidays and jobs received after working hours and on weekends. I've attached the file, which contains detailed information about my problem.
I'm trying to turn calculation to manual, but there does not seem to be an Options button under tools on the mac I'm using. I've checked another mac and it is also missing. I'll probably end up using a pc for the calculations anyway, but I was wondering if anyone knew what was up?
View 3 Replies View RelatedI have a long list (almost 17,000 rows) with two columns (ID and Code). There are about 1400 IDs, each with multiple codes:
ID Code
1 ab
1 mn
1 hh
2 mn
2 hh
3 ab
etc.
I need to turn the list into a table that looks like this:
ID Code Code Code ...
1 ab mn hh
2 mn hh
3 ab
Each ID has a different number of codes (anywhere from 1 to 89).
I know I can right click in cell and choose from the items, but can I actually make the cell a drop-down box, like on websites? Meaning, can I choose which options/numbers/letters/choices I want in the drop down, and be able to right click and highlight one?
View 10 Replies View RelatedI have a color change alert in a cell using Conditional Formatting. Is there a formula that will turn off the alert in that cell once a value, (any value), is entered into the cell?
How does one turn off Relative record?
View 1 Replies View RelatedEvery so often I get a spreadsheet form some one else, and when I start to edit it formulas turn immediately into values.
For example, I enter a =10/2 ,when pressing enter, the cell displays correctly the result, 5. But when I click into the cell, instead of having the formula
=10/2, the only value inside is 5.
How do I keep this happening ??? I want the cells to keep the formulas.
Is there a formula I can use that will look at the following in an excel cell Daily Numbers Report - Summary_2014-01-26.xls
and then convert that into the date value 41,300. And the same thing for all other cells with the same format...so if was Daily Numbers Report - Summary_2014-01-23.xls the formula would convert it to 41,297.
Not sure if this can be done. Here is a example of my project
View 11 Replies View RelatedI have a workbook that contains several formulas that return #value! errors. My formulas are correct and I can remove the error by using an "if" function, but there are a lot of these cells. I just want to make the error show blank to make my workbook look nicer without having to write formulas to avoid the error messages. Is there something I can add in the VBA worksheet function to turn off these errors?
View 2 Replies View RelatedI need to calculate turn around time between two sets of data reflecting both a starting date and time and obviously an ending date and time. This should reflect work hours meaning a day that starts at 08:00 and end at 16:30.
That would be a start and would be great if someone can show me how to calculate this.
But obviously people don't work on Sundays and only work from 08:00 to 12:00 on Saturdays... Can't even imagine how one would take this into account.
I have a series of sheets in my workbook , each sheet has a piece of VBA code that is identical. On my master sheet I want the user to be able to turn on/off this piece of code with the toggle of a button.
My code is a :Worksheet change event
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("B9,D9,")) Is Nothing Then Exit Sub
If Target.Offset(-1, 1) = "" Then.......
.....
End If
End Sub
I have a couple formulas in action to give me the total number of hours worked from start to finish.
Ex:
A1 - 1:30 PM
B1 - 11:45 PM
C1 - I combined the two to get the total number hours worked but set as time: =IF(B1
I have many dates 1/21/06,2/1/06,3/16/06,1/23/06 etc...I wish to convert into month only such as
1/21/06 ---> Jan
2/1/06 ---> Feb
3/16/06 ---> Mar etc...
I tried month(1/21/06) but it does not work. Is there a function to do this?