formula to check a range for any text entires by error.
Example: I have a range of numbers on column A1:A1000, at the end of this range on A1001, I have been trying to use the following formula...
=isNumber(A1:A1000)
if like on A7 it had "525a" instead of "525".
I've been trying to use excel's Isnumber or Istext function to evaluate a range of cells, but have been unsuccesful so far. Is it even possible? or is the formula just restricted to evaluating only single cells?
For example, if I do, Isnumber(A1:A10), is there any way to make that work?
Im using ISNUMBER in a spreadsheet to automatically add a ref number to an entry in the spreadsheet, this is based on the value of a set column. To give you an idea the values are bus services, i.g. 6, 123, 56 etc, when the column has a bus service number entered it auto produces a ref number.
Now the problem is now some service numbers have letters in e.g. X14 X12 36A etc, now these are not recognised and therefore no ref number is given, is there a way of changing my formula to recognise this.
The formula at the moment is as follows
In the ref column (which is locked) =IF(V4=1,COUNTIF($V$3:V4,V4),"")
In column V (which is locked and hiden) =IF(ISNUMBER(D4),1,"""")
The following formula:
=IF(ISNUMBER(F35)="TRUE","",IF(ISNUMBER(E35)="TRUE","X",IF(ISNUMBER(D35)="TRUE","XX","XXX")))
is returning XXX when copied down, where I expected it to return XXX as well as XX, X and " ".
Has anyone got a clue what I'm missing (might be a friday afternoon thing...).
I am faced with the daunting assignment of adjusting a payroll report using infrequently exercised logical expressions. I've been careful to try and build my formula adjustments in intermediate steps, so I could test the results, but I can't seem to get past a dual test. I need to create a commission calculation if there are no values in the two columns immediately left of my active cell,col N79, i.e., if L79 OR M79 contain a value, then do nothing, otherwise, multiply contents of G79 * the commission rate contained in named cell "Split3".
This formula works on a single column test:
=IF(ISNUMBER(M79)," ",G79*Split3)
But I can't seem to construct a formula to test both column cells. I have tried this unsuccessfully:
=IF(OR(ISNUMBER(L79),ISNUMBER(M79)," "),G79*Split3)
The above formula is accepted, but I get: #VALUE, with the explanation:
"A value used in the formula is the wrong data type"
I need to create a formula (Sumproduct) that will look at two criteria then total a third column IF the value in the cell of the third column is a number.
The sumproduct will look at one range A1:A100 and see if it matches initials in cell D1, and it will look at the year in column B1:B100 and see if it matches the year in D2. Then it should total the amount in column C1:C100. But the column C to be totaled includes both dollar values and “N/A”. So If I use something like:
=SUMPRODUCT((A1:A100=D1)*(B1:B100=D2)*(C1:C27))
I get the #NAME? I believe because some of the values are N/A instead of numbers. So can I say something like:
=SUMPRODUCT((A1:A100=D1)*(B1:B100=HD2)*(ISNUMBER(C1:C100)*(C1:C2100)))
(I know this probably isn’t even close, but I hope you can see what I want to do)
I know I can create a separate column to show only the dollar values from column C and use the sumproduct to total that column, but is there a why to skip that step?
Can someone tell me how to have 2 options using isnumber.
I'm using ISNUMBER(SEARCH("SUBMITTED",N156)) but I'd like to have "SUPPLY" & "SUBMITTED"
Here is some of my code. It does not seem to work though. can you fix it?
Dim Madrid As Integer
Dim Paris As Integer
For n = 7 to 17
Madrid = Application.WorksheetFunction.IsNumber(Sheets(3).Value("P" & n + 1).Value)
Paris = Application.WorksheetFunction.VLookup(Sheets("Sales").Value("$E:$I"), 3, False)
I have this formula, I have 2 cells that i eneter times in, I would like to have the formula do this..
I would like to have it only display if there is a value in the cell. If value is in both cells then it would display both cells
=TEXT(Inbound!AP25,"h:mm AM/PM") &" / "&TEXT(Inbound!AP40,"h:mm AM/PM")
Can anyone identify the error in my looping? My IsNumber(f) is not working. If I enter a string, an error message will pop up, but if I enter a number (e.g 4 or -4), the same error message pops up too...what can I do?
I cant really set the inputbox to Type:=1, because I want this inputbox to be optional to the user, i.e If user does not enter anything, it will return a 2.
Sub frequency2()
'Get the frequency of coupon payments per year
frequency = Application.InputBox("Please enter the frequency of the coupon payments", _
"Frequency of the coupon payments", , , , , 1)
'If c = 0 Then 'If it is a zero-coupon bond, set the frequency of coupon payments to 0
'frequency1 = 0
'Debug.Print frequency1
'ElseIf frequency = False Then
'frequency1 = 0
'Else
frequency1 = determinefrequency(frequency)
Debug.Print frequency1
'End If
End Sub
' This function automatically sets the value 2 to the Frequency of Coupon Payment of the Bond if the user
' did not enter anything when prompted.
' It also validates if the user entered negative numbers
Function determinefrequency(Optional ByVal f As Variant) As Variant
Dim testt As Boolean
Do
' If values have been entered into the inputbox and
' the userinput is a number
If Len(f) > 0 And WorksheetFunction.IsNumber(f) Then
I have recorded the below code, is it possible to adjust this so that instead of using "USD" the macro will reference whatever currency the user inputs into say sheet1 cell A1?
View 2 Replies View RelatedI have a problem with isnumber giving me two different results. One time it will evaluate the following as true:
ISNUMBER(0)
and in the same sheet it will evaluate the same as false.
I need ISNUMBER to NOT recognise "0" as a number all the time.
I am trying to create code that deletes lines in a spreadsheet when the first column is either blank or has text in it. However, when writing the VBA code, ISNUMBER and ISTEXT do not work. Amazingly, ISBLANK does work.
View 4 Replies View RelatedI'm trying to develop a formula that can incorporate the search function in amongst a countifs formula. I have a column that contans the string "2.3 Manage Project Delivery" in a single cell. However, a single cell could also contain this text string in amongst other text and be in there multiple times - E.G; "2.1 Manage Customer Support, 2.3 Manage Project Delivery, 2.4 Close Program, 2.3 Manage Project Delivery" etc
My formula currently looks like this: =COUNTIFS('RDC Register'!$AW:$AW,"Not Overdue",'RDC Register'!$C:$C,"2.3 Manage Project Delivery") but it's not counting the cells that have 2.3 Manage Project Delivery in it more than once.
So basically I need to modify my formula to search for this text string in the cell and add all occurrences to the final count.
the attached document. I wish to try and conditionally format Sheet1!D:D depending on if Sheet2!E:E displays a particular letter, when; Matching Sheet1!A:A to Sheet2!A:A Matching Sheet1!B:B if <11 to Sheet2!B:B where cell equals text "Small (7-10)" if Sheet1!B:B is >10 then where Sheet2!B:B equals text "Mid - Large (11-16)"
Matching Sheet1!C:C if cell contains "Hcap" to Sheet2!C:C where cell equals "Handicaps". If Sheet1!C:C doesnt contain "Hcap" match to Sheet2!C:C where cell equals "All Races".
To use an example, if E:E in the cell adjacent to all the matches above equals N then the cell in Sheet1!D:D turns red. Cell D52 would become red. D88, D91, D92, D93 and D96 would also become red. Here was my attempt at the formula, no idea if I was close to the answer.
If A1= 5 ; C1= #N/A ,F5= 7 and E7= 8
Any formula which can average if isnumber A1,C1,F5,E7 ?
it shall ignore errors in this case.
I have this search function that works well: =IF(ISNUMBER(SEARCH("which is < ",E9)),"test ok", "not ok") my E9 cell contains the phase: "I have a number which is < 9, and which is positive..." E9 has "which is < ", then i get back "test ok"
My question is.... how can I do this multiple times within the same function/cell. i.e. if I wanted to search "which is < " and/or "positive" in the same cell, then i get back "test ok", "positive number") I keep trying all combinations to no avail, like: =IF(ISNUMBER(SEARCH("which is < ",E9)),"test ok", "not ok"), =IF(ISNUMBER(SEARCH("positive",E9)),"positive number", "no good")
Keep in mind I am using a numeric example, although I am using this function to check if part of a cell matches specific text...
I am using the ISNUMBER formula to verify if specific text is found in a string of text.
This formula worked when I only needed to find 1 particular brand name:
=IF(ISNUMBER(SEARCH(""BrandB"",RC[6])),""B"",""C"")
Now I need to have 2 different brand names ("BrandB" and "J & B") that need to return a "B" and all others should return a "C".
I found a thread regarding this same topic, but I could not get their solution to work for me.
They recommended using:
=IF(ISNUMBER(SEARCH("BrandB",RC[6])),"B","C")&", "&IF(ISNUMBER(SEARCH("J & B",RC[6])),"B","C")
The fact that my second brand name is written with spaces ("J & B") could be adding to the problem, I don't know. I thought replacing the "C" with another "IF(ISNUMBER" function should work, but I have been unsuccessful at writing a formula that doesn't cause run-time errors.
I am checking whether or not two different cells contain a number or the error #NA.
If one of the cells contains a number then the result will be that number.
If both cells contain #NA then the result should be “99â€
Example:
Formula in Column C
The values are in columns A and B.
If the value in cell A is a number the result is A.
If the value in cell B is a number the result is B.
If the value in cell A and B equal #NA the result is 99
See attached file...I'm having trouble returning a value for the Alpha-numberics that begin with DMR, which should return 'Dishwasher'. All other values are correct, I'm sure it has to do with the character range but I'm a little stumped.
View 4 Replies View RelatedI have 4 cols, x rows. I need Column C to check Column B for a numerical value, and if true, return the value in B, and if not true, then return value from A. Column B are functions formatted as general. The reference made by Sheet2!B is numbers formatted as text as to retain leading zeros. Here is what I have so far
=IF(ISBLANK($B10),$A10,$B10)
I' having trouble using the =IF(ISNUMBER(SEARCH formula to search multiple cells.
I can get it to work to search one cell (as below):
=IF(ISNUMBER(SEARCH("Same",G10)),"No Change",'Aug 09 Matrix'!F10)
(In this case the respone is No Change as Cell G10 contains "Same")
However cannot get it to work for several cells. I have pasted below and highlighted the function I would like it to perform:
=IF(ISNUMBER(SEARCH("Same",G10:R10)),"No Change",'Aug 09 Matrix'!F10)
Essentially the other cells in that row (G10:R10) all contain "Same", however for some reason it is identifying this as FALSE and putting in the data from the 'Aug 09 Matrix' sheet.
I need a formula that will return the minimum value from a column range that flexs without having to manually go in an change row references. There is a blank row between each section of data in order to separate info. As an example:....
Need to formula to flex to include rows 5 thru 7 in the first section but expand to include rows 9 thru 13 in the second section. =MIN(A5.A7) works but how do I get next section to flex to =MIN(A9.A13) without manually changing the cell references? There is always a blank row in between the sections to separate.
I like to create "templates" for files that I work with on a reoccuring basis, just to make things simpler. The current template I am working on tracks items processed by day and is used for two reporting purposes; 1 totals the pay ending items processed so I have the dates laid out based on the 2 week period with formulas for that. The 2nd way it is reported is by the month. Since this is a template, only the first day of the first pay period for a calendar year needs to be entered and the rest of the dates populate based on that date. What I would now like to do is add columns for January - December monthly totals using a formula that will read something like "if column A (where the date is) contains 1/1/2014 - 1/31/2014, then sum up column L" and than copy that formula for the remaining months.
View 8 Replies View RelatedI have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
I have a range of values that are not a constant length. I want a macro that will calculate the range and fill with a formula using the new range. In this example, I need a formula to look at the values in range f464:f471 and calculate the number of values greater than $1000. Column B is a salesman identifier. I can do this manually, but it takes me about 1/2 hour to complete. At every change in "B", I need to place this formula in the open, blank cell in "E" such as highlighted below.
week39
ABCDEF45939SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046039SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046139SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046239SCHTERR-WIEDEMANNDCCDIST-MUSCHANY0463 SCH Total 14042.2146439SCITERR-SULLIVANDCCDIST-MUSCHANY15587.1546539SCITERR-SULLIVANDCCDIST-MUSCHANY7217.2246639SCITERR-SULLIVANDCCDIST-MUSCHANY5316.6246739SCITERR-SULLIVANDCCDIST-MUSCHANY2720.6946839SCITERR-SULLIVANDCCDIST-MUSCHANY520.446939SCITERR-SULLIVANDCCDIST-MUSCHANY195.7147039SCITERR-SULLIVANDCCDIST-MUSCHANY047139SCITERR-SULLIVANDCCDIST-MUSCHANY0472 SCI Total 31557.7947339SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY4190.7147439SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY3219.7647539SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY3187.147639SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2209.3747739SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2132.7547839SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2034.56
Spreadsheet FormulasCellFormulaF463=SUBTOTAL(9,F435:F462)F472=SUBTOTAL(9,F464:F471)
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to
Mini.xlsx
Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
Needed a formula in sheet1 in column D where if in sheet2 in column J when the cell value is in the range from 50 to 100 then the cell value in sheet1 column D becomes 0.
The range from 50 to 100 means starting from 50 it can be any one number till 100.
The formula will be pulled down in D column upto the required length.