Formula To Compare Sum Of Range To Cell Value And Return Cell Count Of Range Used

Jun 3, 2014

I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to


Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.

View 6 Replies


Time Range Formula - Compare Data From Cell A To B

Jun 27, 2014

I have two Date range in different cell and I want them two return "TRUE" value even if the start time or end time of another is earlier or later by 1-2 hours:

Example: I want to Compare Data from Cell A to B. Values should return True as it is within 1-2 hour range.



View 4 Replies View Related

Formula To Return Specific Value If Cell Falls Within Range

Apr 6, 2012

I am looking for a formula that will enable me to determine which one out of five thresholds a percentage falls within and the retuns a specific value for the corresponding threshold. Here is an example of the data (only showing three thresholds):

1 ___0.0%_____50%_____$5.00
2 ___51%______75%_____$15.00
3 ___76%_____100% ____$25.00

Where the values in A1 and B1 are the low and high ends of one range. I would like the formula to determine which range the value falls within and return the value in collumn C (C1 for the A1:B1 range).

I can do this using multiple 'if' statements, but am looking for a much more streamlined way to determine the proper value in column C.

View 2 Replies View Related

How To Match A Cell Data With A Range Of Cells And Return Cell Reference In Another Cell

Dec 12, 2012

i want to match a cell data with a range of cells and if matches return the cell reference in another cell

View 3 Replies View Related

Cell Ranges: Put A Value Into A Cell And Compare It To That Range

Jul 29, 2009

if I have a range, say 33-35, I want to put a value into a cell and compare it to that range. It will set another cell to a certain value, based on the range.

i.e. if (35 > A1 > 33)
A2 = B
elseif (37 > A1 > 35)
A2 = X

View 3 Replies View Related

Compare Cell Range With Value In VBA?

Apr 2, 2012

Here is what I want to do:

If AND(NOT(ISBLANK(A1);A10) then B1= "NOT OK"
If AND(NOT(ISBLANK(A1);A1=0) then B1="OK"
End if

How to do this for a range A1:A10 in vba??

View 5 Replies View Related

Excel 2010 :: Return Range Of Cell Concatenated Based On Single Cell Value

Jul 2, 2012

I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:

Number of variable entered: 5


Should give me: "q9001 q9002 q9003 q9004 q9005"

I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.

(Using Excel 2010)

View 7 Replies View Related

Flexible Range Formula: Return The Minimum Value From A Column Range

Feb 9, 2010

I need a formula that will return the minimum value from a column range that flexs without having to manually go in an change row references. There is a blank row between each section of data in order to separate info. As an example:....

Need to formula to flex to include rows 5 thru 7 in the first section but expand to include rows 9 thru 13 in the second section. =MIN(A5.A7) works but how do I get next section to flex to =MIN(A9.A13) without manually changing the cell references? There is always a blank row in between the sections to separate.

View 5 Replies View Related

Count Value From Cell Range In Cell Range?

Feb 26, 2014

How do I count values from a cell range in a cell range? For example I have 2 tables:

First Table:
John A
John B
John C


I'd like to count the number of times John A, B and C appeared in the Who asked column. for this case, the sum should be 2.

View 6 Replies View Related

Return Third Value If Cell Is Found Within Another Cell Range

May 15, 2012

So I'm trying to merge some of the information found within two separate worksheets. I'm working with a list of ID#s that may or may not be found on both worksheets, and in a column on Worksheet1 I want to put some of the information found for the corresponding ID# on Worksheet2.

Now I've figured out how to check if an ID# on Worksheet1 exists within a column in Worksheet2 using the formula:


(Excuse the syntax errors if they exist, I'm doing this off the top of my head for expediency)

However, instead of returning the word "Match" if it does indeed exist on Worksheet2, I would like to return the value found in Column E, on the row of the matched ID#, in Worksheet2.

View 6 Replies View Related

Return Last Cell From Range Of 6

Apr 5, 2009

i have a range of cells ( address ) (d16:d21). what i need i16 to do is return the second from last row that has data in it so for example if data is

27 arcacia ave
w4 3rd

it would return the answer london. however if the data was

27 arcacia ave

View 4 Replies View Related

Count Cell In The Range

May 12, 2009

In cell G443 I have the word "Jaxx"

I need it to count any cell in the range that has that word anywhere in the cell.

An example:

Practice Jaxx is in a cell.
If we can countif after the 9th character if the word practice is in the cell.

View 9 Replies View Related

Find Name In Range And Return Cell To The Right?

Jan 25, 2012

Have a range of data with names dotted in different rows and cells.

I want to find a name, the return the number in the cell to the right.

Can use VLOOKUP as names arent always in same column of the range.

View 9 Replies View Related

Vba Return Name Of Range Selected Cell

Nov 16, 2008

I have 12 named ranges on a sheet, ArrM1 thru ArrM12.
Each named range is same size, 6 Rows by 7 columns.

Q. If user selects a cell on sheet that is in one of these ranges, what is code to return name of range?
e.g. ArrM1 is cells c10:i15, user selects cell d12; I would like vba to return the name of the range "ArrM1".

Reason, I have the code below so if user selects cell in ArrM1 code is executed, but rather than reproduce code 12 times for each range I thought I could first see where user selects and then change variable for vrange,
Set vrange = wksYearlyCalendar.Range("ArrM1") to
Set vrange = wksYearlyCalendar.Range("ArrM" & x)

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim CalDaySel As String, CalDateSel As String
Dim vrange As Range
Dim cell As Range

View 9 Replies View Related

Return Range From Intersecting Cell

Aug 15, 2009

Here is a sample of what I'm working with: ...

View 9 Replies View Related

Return All Combinations Of Cell Range

Feb 8, 2008

see my attached picture. I am attempting to write a simple Excel Macro that can take the data from the red box and make it into the data in the blue box. Assume that I have a lot of data that will fill up the contents of the red box. I want to run the macro and have the macro output the data, NOW redistributed into the format that is contained in the blue box.

View 5 Replies View Related

Return Random Cell From Range

Apr 7, 2008

I want to create a button so when you press it, it will pick a random cell and display the info. Similar to the same sort of thing as a 'tip of the day' button you see on so many websites. I have a formula that kind of works from this site, but only when you make changes on a sheet or each time you load it up. I have tried to assign it to a button/picture but with no luck!

View 4 Replies View Related

Count Cell With Data Within Set Range?

Jun 18, 2014

I'm trying to count number of rows with Data within a Range. i.e.

CatA = Range("A1:A15")
CatB = Range("A20:A35")

I want to know how many rows in range CatA have Data and how many rows in CatB have Data etc.

View 3 Replies View Related

Count Zeros In Specified Cell / Range

Jun 27, 2014

Count all zero(0) in the row except those that belong to column "Friday" :



[Code] ........

View 3 Replies View Related

Count Words In Cell Range

Mar 15, 2008

I am trying to count words in seperate rows,columns in a spreadsheet. I have tried to use the formula that was suggested in one of the formula pages but I did not get the correct answer. I tried to do just like the information said with a1:a5. I did get 5 as an answer but when I deleted one of the words it still said there were 5 words.

View 4 Replies View Related

Find Value In Range Then Return The Cell Address?

Mar 16, 2014

construct a formula that finds a value in a range , then returns the cell address of that value.

Say, i wanted to find the amount 12385 from another sheet , range C2:AA12 (contains only numbers , no duplicates). result should give me the address of that value.

I have tried the address & match function but gives me an N/A error.

View 3 Replies View Related

Return Values Based On The Range In Another Cell

Nov 28, 2012

I am trying to put together a calculation sheet for court costs and I need a cell to return a value based on the amount entered in another cell. For example, if I input a value between 1 and 5 in cell A1, I would like "Cat" to appear in cell A2. However, if I input a value between 6 and 10 in cell A1, I would like "Dog" to appear in cell A2. Is this something that can be done without VB?

For the real spreadsheet, I would need the following outputs in cell A2 based on the respective ranges in cell A1:

Output to A2 = $405 if input to A1 is < $50,000.
Output to A2 = $905 if input to A1 is ≥ $50,000 and < $250,000
Output to A2 = $1,905 if input to A1 is ≥ $250,000

View 3 Replies View Related

Look Up A Value In A Range Of Cells And Then Return A Value In A Cell In The Same Row Containing The Desired Value

Apr 26, 2009

I want to look up a value in a range of cells and then return a value in a cell in the same row containing the desired value, similar to a vlookup. Except I want to search through several columns for this value and I would like to have it find every occurance of the desired value and return a value in a cell n the same row of each occurance of the desired value.

View 2 Replies View Related

.range.find Need To Return Cell Address

Nov 14, 2007

when I use the range.find function to find a certain value in a column.. i want to return the address of the cell.. and save it in a range variable. how would I do that?

so this is what i have now.. but Rng does not return as a range.. it returns 69... when i use ctrl + G and type ?rng

set rng = .range(A:A).find(what:=69, After:=.Cells(1, 1), Searchorder:=xlByRows, searchdirection:=xlPrevious)
ok so say it picks up..... cell A69... how do i get it to save range A69

View 9 Replies View Related

Return Value Based On Cell Being Within Numeric Range

Apr 19, 2009

I have a spreadsheet that has (amongst other things) 2 charts based on dynamic data with ranges that redraw using vb... The charts will draw envelopes that correspond to an aircraft's moment or c of g envelope - there will typically be 2 envelopes drawn, "normal" and "utility" or "aerobatic".

Plotted on the charts are an aircraft's takeoff and landing weights and moment/C of G.

I'd like to be able to use a formula or VB to determine which envelope takeoff/landing information falls in (or if it falls outside all envelopes). This data would then be used to generate an error message/possibly also in conditional formatting, etc.

View 4 Replies View Related

Return Single Cell Address From Range

May 18, 2007

I have a list of ID's on one sheet that are also located in a large matrix on another sheet.

This macro uses the Find_Range function to find each ID within the matrix and return the column header where the ID was first located.
There is also a line which return a list of ranges, indicating all the places where the ID was found.

What I want is to convert the list of ranges into a list of corresponding column headers (ie row 1 of all columns in the range)

' Number of id's in list
RowCnt = Application.WorksheetFunction. CountA(Columns("A"))

For I = 2 To RowCnt

LookFor = Sheets("ID List").Range("A" & I)
Set InRng = Sheets("Matrix").Cells
Set Found = Find_Range(LookFor, InRng, xlValues, xlWhole)
On Error Resume Next ' If value is not found
Sheets("RateID Count").Range("C" & I) = Sheets("Matrix") _
.Cells(1, Range(Found.Address).Column) ' Return column header
Sheets("ID List").Range("D" & I) = Found.Address(False, False) ' Return cell address or range of addresses
On Error Goto 0

Next I

View 9 Replies View Related

Lookup Cell And Return A Range Of Cells

Jun 9, 2008

I have data inputted into cells a-o in rows 1-250. I want to search, lets say row 1, (I do want to search all 250 rows if that info is relevant!) and if cell m is blank then I want to return all the info from row 1 into row 260. If there IS data in cell m then I want to return nothing. Bottom line I want to return all the data in all the rows that contains nothing in cell m.

View 3 Replies View Related

Count Unique Value In Range Of Cell With Given Condition?

May 28, 2014

I would like to check if there's a way to count the number of unique value with a given condition

Eg. condition where parcel count <> 0, also want to find out the unique value of district and postal sector

Attached is the files, and my desired result is highlighted in RED.

View 3 Replies View Related

Occurence /count Of A Cell Value In A Column/range

Nov 14, 2008

I need to find to the occurrence/count of a cell value in a column/range.

Like say column A has following values

A14 and so on ..

I need to find the no. of times or count A12 is there in the column A.

I have tried using .count function in the range A but this instead gives the number of cells in complete range A

View 3 Replies View Related

VLookup To Search Range On Different Sheet And Return Appropriate Corresponding Cell

Jan 22, 2014

I need to lookup to search a range on a different sheet and return the appropriate corresponding cell.

Basically its if a1 is found in the other sheets range a1:a100 then return the corresponding Bcolumn value from the different sheet.

=VLOOKUP(A2,'All Users'!A$2:A$100,'All Users'!B!2:B!100)

Example of 'All Users' Sheet


View 3 Replies View Related

Copyrights 2005-15, All rights reserved