Mode Function Over Multiple Sheets
Dec 1, 2006
I am trying to use the MODE function over multiple sheets within a work book, however when using =MODE( 'First Page:Last Page'!K5). the formula returns "#REF!". this should be returning 7, 8 or 9. I have already checked to see if the range is wrong, but when I changed the function to SUM, AVERAGE, etc they work fine....
however due to the need for non-excel users to easily add extra pages, adding each page individually would be a pain (and would mean I would need to train the staff in Excel)
View 4 Replies
ADVERTISEMENT
Mar 10, 2008
I want to use a formula to detect which name is appearing most in a selected range of cells. The Mode formula gives this result but for numbers. I was thinking of the probability of having to combine the LEN function with the MODE function.
View 9 Replies
View Related
Jan 20, 2009
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
View 5 Replies
View Related
Sep 3, 2009
How would i find the mode of a range of numbers that changes?
For example, I want a simple out put of the Mode for the numbers after Aand D, and E and so on, without having to do it manually. A function perhaps?
I have attached spreadsheet. The 2 left columns are the raw data and the right columns are what i want the outcome (modes) to be. Is there a way I can do this without having to go through this manunally for every one?
View 11 Replies
View Related
Jul 21, 2014
I'm trying to calculate the mode for a large data set, but there is no 'mode function' in subtotal. I need to find the mode for each change in day - without having to retype the function.
View 11 Replies
View Related
Sep 14, 2009
I’m using excel 2003 and I need help with the MODE function. I have a spreadsheet with 142 work types’ rows of work with each one showing the last 13 months of work received. I have set up a mode function for each work type, but for the ones when excel cannot work out the mode it puts n/a in and I have to do them manually, by looking at the last 13 months data and basically guessing a mode figure – which is a pain (e.g. if there was 13 different numbers from say 120 – 135 excel would give n/a but I would put the mode at around 128. As this spreadsheet gets updated monthly is there a way I can trick excel into giving a mode figure, or a figure close to what the mode should be. I have attached a sample of the spreadsheet.
View 3 Replies
View Related
Apr 11, 2013
I have a spreadsheet with columns of data running from column C to column Z.
In column B i am trying to work out which word appears the most.
For exaple in cell B2 i am looking for a formula to work out which word appears the most from cells C2:Z2.
View 1 Replies
View Related
Mar 10, 2009
I am looking for assistance for 2 vbcode functions that will provide current:
1) Calculation Mode - whether automatic, manual or semi automatic; and
2) Calculation Status - whether a recalc is required or not.
These functions need to work regardless of the calculation mode and always need to show the current status.I have tried creating volatile functions, but the problem I face is that if the calculation mode is manual, the function's return value is not updated unless I force a recalc which renders the purpose of the exercise useless.
View 3 Replies
View Related
May 8, 2007
i've tried searching for "Mode Function in Text" , "Mode Function by Text" but to no avail. Can someone please guide me in how to do a Mode by Text? =MODE(number1,number2,...) But if i have a whole chunk of data in Strings in cells Range A1:C50
1) How can i get the mode of that Range ?
2) is it possible to get the statistic of those for e.g.
Apple 20
Pear 30
Watermelon 50
etc......
View 4 Replies
View Related
May 9, 2014
It is entered in Column B of the sheet Round 2. Basically what I want it to return is the lower price from two different sheets looking them up by part number. Also I guess something I didn't think of is that the HD Final Sheet will not contain all the parts...while the other sheet Round 1 will have all. In cases where the part number is not found on the HD Final sheet I want it to put the price from the Round 1 sheet.
View 14 Replies
View Related
Jan 19, 2009
My sheets are all categorized by date, and I want to be sum individual cells on each worksheet on one final summary worksheet. For example, if cell A1 on each sheet was units sold and I wanted to see how many total units were sold between Jan-04-08 and Jan-16-08 my formula on the summary sheet would be:
=SUM('Jan-04-08:Jan-16-08'!A1)
But I want to be able to easily modify what dates my summary sheet shows so I tried using the function:
=SUM(INDIRECT("'"&N14&":"&N15&"'!A1"))
where N14 was the starting sheet and N15 was the ending sheet. It keeps giving me #REF! however and I can't figure out why and don't know if this is something I can fix.
View 9 Replies
View Related
Feb 27, 2009
Can I use the "countif" function using a group of sheets as the range and the criteria on a separate sheet or manually typed in?
I have tried and continue to get the #VALUE error.
OR
Can I do the same thing and perform the "countif" function by using a specific value as the way to count?
View 9 Replies
View Related
Dec 17, 2013
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
View 2 Replies
View Related
Apr 8, 2014
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
View 14 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Aug 9, 2007
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count)
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
View 9 Replies
View Related
Feb 18, 2014
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
View 3 Replies
View Related
Dec 26, 2009
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
View 9 Replies
View Related
Feb 19, 2012
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
View 5 Replies
View Related
May 6, 2014
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
View 5 Replies
View Related
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Feb 9, 2014
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
View 12 Replies
View Related
May 28, 2014
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
View 2 Replies
View Related
Oct 8, 2007
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))
View 11 Replies
View Related
Apr 21, 2013
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
View 4 Replies
View Related
Jan 5, 2014
I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:
{=INDEX(Jan!$B:$B,SMALL(IF(Jan!$A:$A=Smith!$A$2,ROW(Jan!$A:$A)),ROW(1:1)))}
Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?
View 3 Replies
View Related
Mar 16, 2008
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies
View Related
Jun 24, 2014
I've attached a sample sheet to this message.
What I'm trying to do is grab data from the raw data sheet and paste it into the master sheet based off of certain criteria. I want to list any accounts that are not correct.
For example, I want to look through the Raw Data sheet, find the account that contains campaigns which are not correct, and then list the name of the account on the Master sheet. I only need the account name listed once on the Master sheet.
Sample Data.xlsx‎
View 4 Replies
View Related
Mar 21, 2014
Index across multiple sheets returning multiple values
I am building a payroll workbook and I need to build a sheet that will allow me to choose an employee name and the formula will return all the data related to this employee. I found this forumla to do this: =IF(ROWS(...)<=...;INDEX(INDIRECT(...);SMALL(IF(...=...;ROW(...)-ROW(...)+1);ROWS(...)));"")
But in my workbook, the data is on multiple sheets . How do I adapt this formula to look into 12 sheets?
that data would be returned in order of the date of the pay.
file: Test formula on payroll_v3.xlsx
View 4 Replies
View Related
Feb 14, 2009
I have a need to populate a summary worksheet using two variables to find data in two or more other worksheets.
I find writing out what I want helps some times so let me try it here.
So my variables are:
Product (there are 22 products)
Supply Less than (inset number)
These are the two criteria I want to use to produce a result.
The next issue is I have 300 stores that carry said 22 products. Each store has a unique number 0001, 0002, 0003 etc. So in a separate worksheet I have a list of the store numbers, and then the products. So each product has the store's number to the left in Column A, Column B has the product name, Column C has the quantity on hand.
What i would like to do on the summary page is select the product, and then select the supply less than or equal to 'x' and then have the stores with the selected product less than or equal to x display below.
The last part of this is then to display (data from an other sheet) on the summary page which contains the quantity of the product selected available at the warehouse for that store.
View 9 Replies
View Related
