I am having a problem with vlookup. I have the formula working but would like to divide it by 1000 then multipy by 24. When I enter /1000*24 after the colon in the vlookup formula my answer is 0(zero). If I don't try to divide and multiply the answer is correct.
View 9 RepliesA1 would be the cell that users would enter quantities of 500, 1000, 1500, 2000 etc and based upon what they entered-cell a2 would give a corresponding entry of 10,20, 30 etc.
View 4 Replies View Relatedhow can i do the following equation?
40$ if the sum is less than 1000$
75$ if the sum is less than 1001$ tO 3000$
100$ if the sum is greater than 3001$
C16 X C19 if sum is greater than 12000$
all should go in one cell
How to stop my 100% from changing to 1000% after it pastes?
Here's the pc of code that is performing the copy/paste from one sheet to another sheet within the same workbook..
Code:
With Sheets("BOM Worksheet").Range("C" & nr)
.Value = c.Offset(, -16).Value
.Font.FontStyle = "Bold"
.Font.Color = RGB(186, 85, 211)
End With
Based on the 1st example below, I have a file with 1000's of columns where every 3 columns has the same type of info....
View 9 Replies View RelatedI use a worksheet full of formulas to know what divisors a number have, but i need to see what numbers have no decimals in about 500-1000 cells. Is there a formula whitch computer can use to see if it shows a number or not (if a number have or dont have decimals)?
View 2 Replies View RelatedI have about 300 cells filled with different formula's like the ones written below.
=SUMPRODUCT(--('Book 1'!$B$1:$B$1000="H"),--('Book 1'!$C$1:$C$1000=D21),('Book 1'!$W$1:$W$1000))
=SUMPRODUCT(--('Book 1'!$B$1:$B$1000="H"),--('Book 1'!$D$1:$D$1000=I21),('Book 1'!$S$1:$S$1000))
Spreadsheet works great, but I've realized that I should have expanded beyond the 1st 1000 cells (example: $1000). One book 1, my data entry will extend beyond row 1000.
Is there a way I can replace all $1000's on the spreadsheet with say $3000 without having to correct each of the 300 cells separately?
i have a figure of 1000 in cell a1. i want to divide it by a figure in cell b1 and have an answer in c1, or divide it by a figure in c1 and have an answer in b1.
in summary, cell a1 has i figure in it while cells b1 and c1 are empty until i enter a number into one or the other.
I made a thread similar to this earlier but was unable to get to a desired end result.
I am trying to make a formula that will count the number of cells that do NOT have a fill color AND have a value over 1000 AND are greater than 60 days old as of the last day of the previous month.
Attached is a file with sample data so you can better understand
I included 2 formulas in the file that I am already using. Just in case that information is needed/relevant.
about making my code a bit more useful.
I started with a basic code as below which basically looks at upto 1000 part ids in column A and goes to my database to find corresponding Product Codes from a table in the database call PART
How would I modify the below code to extract all of this data from multiple files? I have about a 1000 files that I need to extract all of the data from to manipulate in Excel.
Code:
Sub ImportWordTable()
Dim wdDoc As Object
Dim wdFileName As Variant
Dim TableNo As Integer 'table number in WordDim iRow As Long '
[Code] ...........
im trying to create a simple random sample from my data set of size n=100 and then i need to repeat that step a 1000 times to make a new data set that i can transfer over to stata. Everything I have seen on the internet involves generating random numbers which isnt what i want. I need to be able to generate a random sample.
Currently my excel spreadsheet consists of 4 columns with 200 entries in each column.
Am working with a spreadsheet of about 1000 rows and 50 columns which I need to transform into 2 columns and as many rows as needed. I have attached a simplified example of a 3x3 spreadsheet so you can see what I mean. I have already managed to get my result using Filtering and some copy and paste but I am struggling to now fully automate the solution.
View 4 Replies View RelatedI've been trying to put together a VBA code that allows me to find a number between 1000 - 10,000. I am able to find any number below 999 but can seem to find anything above 1000. I've been using the following ....
View 13 Replies View RelatedI have a rand () which provides me a different number upon calculate. I would like to run a loop for 1000 times and take the value and copy and paste in a range.
The below sorta works, but at times it stops or doesn't work at all. I have a loop for the counter and the for each to place the value into the cell and have it run over and over and placing the value in the next cell underneath. I have the counter at 10 so I dont get stuck in some endless loop before I know it works.
Code:
Sub montecarlos()
Dim MCs As Long
Dim c As Range
Dim lCount As Long
Dim lNum As Long
lCount = 0
lNum = 1
Worksheets("MonteCarlo").Activate
[code].....
HOw do we hard code excel to show when number typed as with the 1000 separator.
For Eg: 1,000
How can i format a column of cells so that if a number is less than 10 for eg that that particular cell is then multiplied by 1000.
View 9 Replies View RelatedI'm trying to accomplish is to take an Excel file that contains one column of data consisting of up the maximum number of rows of data (numbers formatted as text? "000000000") and export the data to a text (.txt) file 1000 rows at a time. I would also like the code to allow me to name the .txt files in succession, for example, Pg01, Pg02, Pg03, etc.
The files are going to be used to query a system that will only accept text input 1000 items at a time.
I run the following code to ensure the data is formatted consistently:
Sub a_VerifyDataForInput()
' Start at Cell A1
Range("A1").Select
' Select Column A
Columns("A:A").Select
' Format data in Column A
Selection.NumberFormat = "000000000"
' Replace all "|" (whatever you call this thing ... pipe???)
Selection.Replace What:="|", Replacement:="", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
' Replace all "-" (dashes)
Selection.Replace What:="-", Replacement:="", LookAt:=xlPart, _ ........................
Is there any way witch i can use to make the auto-filter range bigger than 1000 cells?
View 2 Replies View RelatedNeed macro to search approx 1000+ xls files in folder/directory for common text string "see reference" and then output the file number which is located in cell A1 to new spreadsheet for each file the text "see reference" is found.
View 2 Replies View RelatedI need a formula that returns the Nth number from a single column that contains a small number of values within a span of 1000 cells. E.g., within 1000 cells there are 36 with numbers and the remaining cells are blank. I need to obtain the first occurrence of a number in the column, then the second, third... to the thirty-sixth. The end result would be a column with 36 numbers with no blanks in between without loosing the correct order of the numbers.
I have excel 2003 and have been tooling around with the index and lookup functions with no success.
I had sent 1000 emails to the my customers by using mail merge in word document. Now I need to reply to these 1000 customer again individual one by one. The message is the same, but I need these thing to be sent in individual.
View 1 Replies View RelatedI have 1000 workbooks in a folder, each workbooks format is same.
as of now I open each workbook, and check if values in A10 is equal to B10, that is if the value in A10 is "100" I will check if B10 is also "100" if not I will make a note the file name.
I have more than 1000 workbooks in a folder, It is really difficult to open and check if the values are same. is there a macro, which will check the condition A10 = B10, if not get the file name in one sheet.
I have conditional formatting on a cell based on a formula, when I entered the solution of "if then 0 " but the cell doesn't see the result as a 0, if I manually enter the 0 the conditional format works.
I even tried putting the formula in another cell and then referencing to that cell, still didn't work...
The "divide by zero error won't trigger the conditional either......
[Code] ....
If I have a value of lets say 53, I need it broken down into equal and whole numbers across the spread sheet with the last one being the remaining value.
Currently for example in cell F5 I have a value of 41 that I need to break down so
I have done the following:
In Cell P5 =IF(F5>=25,F5-21,F5)
Then in Cell Z5 =IF(P5>=25,P5-21,P5) and this goes on until I have zero value from the original value in the last cell can i not do this all in one formula and have the results populate in other cells.
I am creating a 'weekly average spreadsheet' (Excel 2007) for a teacher. It has a column for each student's name and his test grade for each day (M-F). The last column gives his weekly average.
She also needs an average for all the students' for the week (vertically). My formula is correct, i.e., =AVERAGE(H2:H11). However, I'm getting a divide by zero error because I have some blank rows above my formula (so she can add new students' names as they come.
How can I get rid of the divide by zero error so she can see the running averages as she inputs grades (but still leaving empty rows for new names)?
I have just started to try and learn VBA for excel. the resource I have been using are books and the WEB. Some how, not sure how there was/is some code where all enteries in all worksheets are divided by 100, i.e if I enter 2222 after clicking the enter button the result in the cell is 22.22. I have deleted all macros and code however the problem still exist.
View 3 Replies View Related
If CheckBox1.Value = True Then
Range("e25") = ComboBox6.Value
ElseIf CheckBox2.Value = True Then
Range("e25") = ComboBox6.Value / 2
End If
Im getting an error on the second to last row, Ive never tried to divide using VBA before and I have no idea how to!
Also the amount im trying to divide will always be in the format hh:mm
I have a database that requires me to find the average of some data over several columns, however if one of the values I have to divide by is a zero I get a 'Can't Divide By Zero Error' is there any way to override this ? So that if a Divide by Zero Occurs, instead of returning a 'Can't Divide By Zero Error' it just replaces it with a Zero instead ?
View 6 Replies View RelatedI have minutes of meeting and have to divide them into different sheets against completed, and different departments and dept HOD responsible for it. How do I do it without "Copy/Pasting" the code? Also I have to remove the ones that are done. Any macro or something that can be written for these.
format of sheet
Sl No. | Date | Remarks | Dept | Dept Head 1 | Dept Head 2 | Status
I have to get data into different sheets against Dept, Dept Head 1, Dept Head 2 and remove the "Done" status to different sheets.
How do I do it without manual labor?