I made a thread similar to this earlier but was unable to get to a desired end result.
I am trying to make a formula that will count the number of cells that do NOT have a fill color AND have a value over 1000 AND are greater than 60 days old as of the last day of the previous month.
Attached is a file with sample data so you can better understand
I included 2 formulas in the file that I am already using. Just in case that information is needed/relevant.
I use a worksheet full of formulas to know what divisors a number have, but i need to see what numbers have no decimals in about 500-1000 cells. Is there a formula whitch computer can use to see if it shows a number or not (if a number have or dont have decimals)?
I need a formula that returns the Nth number from a single column that contains a small number of values within a span of 1000 cells. E.g., within 1000 cells there are 36 with numbers and the remaining cells are blank. I need to obtain the first occurrence of a number in the column, then the second, third... to the thirty-sixth. The end result would be a column with 36 numbers with no blanks in between without loosing the correct order of the numbers.
I have excel 2003 and have been tooling around with the index and lookup functions with no success.
A1 would be the cell that users would enter quantities of 500, 1000, 1500, 2000 etc and based upon what they entered-cell a2 would give a corresponding entry of 10,20, 30 etc.
Spreadsheet works great, but I've realized that I should have expanded beyond the 1st 1000 cells (example: $1000). One book 1, my data entry will extend beyond row 1000.
Is there a way I can replace all $1000's on the spreadsheet with say $3000 without having to correct each of the 300 cells separately?
i have a figure of 1000 in cell a1. i want to divide it by a figure in cell b1 and have an answer in c1, or divide it by a figure in c1 and have an answer in b1.
in summary, cell a1 has i figure in it while cells b1 and c1 are empty until i enter a number into one or the other.
I am having a problem with vlookup. I have the formula working but would like to divide it by 1000 then multipy by 24. When I enter /1000*24 after the colon in the vlookup formula my answer is 0(zero). If I don't try to divide and multiply the answer is correct.
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
I started with a basic code as below which basically looks at upto 1000 part ids in column A and goes to my database to find corresponding Product Codes from a table in the database call PART
How would I modify the below code to extract all of this data from multiple files? I have about a 1000 files that I need to extract all of the data from to manipulate in Excel.
Code: Sub ImportWordTable() Dim wdDoc As Object Dim wdFileName As Variant Dim TableNo As Integer 'table number in WordDim iRow As Long '
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales 23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
im trying to create a simple random sample from my data set of size n=100 and then i need to repeat that step a 1000 times to make a new data set that i can transfer over to stata. Everything I have seen on the internet involves generating random numbers which isnt what i want. I need to be able to generate a random sample.
Currently my excel spreadsheet consists of 4 columns with 200 entries in each column.
Am working with a spreadsheet of about 1000 rows and 50 columns which I need to transform into 2 columns and as many rows as needed. I have attached a simplified example of a 3x3 spreadsheet so you can see what I mean. I have already managed to get my result using Filtering and some copy and paste but I am struggling to now fully automate the solution.
I've been trying to put together a VBA code that allows me to find a number between 1000 - 10,000. I am able to find any number below 999 but can seem to find anything above 1000. I've been using the following ....
I have a rand () which provides me a different number upon calculate. I would like to run a loop for 1000 times and take the value and copy and paste in a range.
The below sorta works, but at times it stops or doesn't work at all. I have a loop for the counter and the for each to place the value into the cell and have it run over and over and placing the value in the next cell underneath. I have the counter at 10 so I dont get stuck in some endless loop before I know it works.
Code:
Sub montecarlos() Dim MCs As Long Dim c As Range Dim lCount As Long Dim lNum As Long lCount = 0 lNum = 1 Worksheets("MonteCarlo").Activate
I'm trying to accomplish is to take an Excel file that contains one column of data consisting of up the maximum number of rows of data (numbers formatted as text? "000000000") and export the data to a text (.txt) file 1000 rows at a time. I would also like the code to allow me to name the .txt files in succession, for example, Pg01, Pg02, Pg03, etc.
The files are going to be used to query a system that will only accept text input 1000 items at a time.
I run the following code to ensure the data is formatted consistently:
Sub a_VerifyDataForInput() ' Start at Cell A1 Range("A1").Select ' Select Column A Columns("A:A").Select ' Format data in Column A Selection.NumberFormat = "000000000" ' Replace all "|" (whatever you call this thing ... pipe???) Selection.Replace What:="|", Replacement:="", LookAt:=xlPart, _ SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _ ReplaceFormat:=False ' Replace all "-" (dashes) Selection.Replace What:="-", Replacement:="", LookAt:=xlPart, _ ........................
Need macro to search approx 1000+ xls files in folder/directory for common text string "see reference" and then output the file number which is located in cell A1 to new spreadsheet for each file the text "see reference" is found.
I had sent 1000 emails to the my customers by using mail merge in word document. Now I need to reply to these 1000 customer again individual one by one. The message is the same, but I need these thing to be sent in individual.
I have 1000 workbooks in a folder, each workbooks format is same. as of now I open each workbook, and check if values in A10 is equal to B10, that is if the value in A10 is "100" I will check if B10 is also "100" if not I will make a note the file name.
I have more than 1000 workbooks in a folder, It is really difficult to open and check if the values are same. is there a macro, which will check the condition A10 = B10, if not get the file name in one sheet.
I'm a newbie to these forums, but I had a question that I couldn't find an answer to in the search feature. So, I joined and here I go....
I have a whole lotta data (nearly 600 "pages" of data) that I pasted into Excel. Unfortunately, it's formatted poorly and I'd like to make it nice and purty.
What I started to do was to create a 2nd sheet and then do an "=" and then click the spot with the 'group name' and then another "=" underneath it and then clicked the spot with the 'premium' info, etc.
After a couple of these, I figured that I could simply make a formula to help me out with it. Please see the attached screen captures for some detail on my issue.
Can someone help me create a formula or a way to count a certain cell and then 52 cells underneath it and display it?
I have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)
I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.
Where it gets complicated is once i filter on the Zones;
I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.
I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -
