DDB Fixed Upon Making It Visible Without Having To Scroll Up And Down?
Mar 26, 2012
I have a Drop Down Box that I am hiding upon selection of another DDB. I can get it to be hide/show using the following code:
ActiveSheet.Shapes("Drop Down 4").Visible = False
and
ActiveSheet.Shapes("Drop Down 4").Visible = True
The only problem is, that when it becomes visible again, the DDB appears in a different location about an inch to the right of where I orginally had it. However when I scroll using my mouse so the DDB is not showing on my screen, and scroll back up, the DDB jumps back into correct position, with the correct size.
Is there anyway to keep the DDB fixed upon making it visible, without having to scroll up and down? As it will look really bad to my end user.
I have a scroll (form control) linked with data from another sheet. It scrolls nicely and works fine but I'd like to be able to update the data sheet and then the table with the scroll automatically update too.
how to scroll through visible cells after I have autofiltered a list, the same way you do when you use the arrows on your keyboard. When I try the offset method, Excel selects the following row, regardless its visibility.
I'm trying to write a code to make a number of buttons visible depending on a cell value
I have 10 command buttons all are invisible and I want to show only the first x x is the value of cell "A1" in "Sheet1" (will be from 1 to 10)
Code: Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range) Dim i As Long For i = 1 To Sheet1.Range("A1").Value CommandButton& i.Visible = True Next i End Sub
I have a workbook with about 53 worksheets one for every week in the year. They are named as follows: VA-1-1-09 TO VA 12-28-09 All sheets are hidden except the (VA-1-1-09)
What I am trying to do is create some logic that would keep all 52 sheets Very hidden except sheet VA-1-1-09 Till the second week starts at that time what I would like to see happen sheet VA-1-5-09 come out of very hidden and appear visible and send sheet VA-1-1-09 to just a hidden state. I like to have this happen for every week of the year? If this can happen automatically that would be great however a command button clicked once a week would do the trick as well.
I have a data validation list in cell D11 on sheet "Data Entry" and a command button "btnMultipleProperties" that I only want visible if "Multiple" is selected in "D11" I have the below code in "This Workbook" in VBE but it doesn't work. What did I miss?
Private Sub Worksheet_Change(ByVal Target As Range) With Sheets("Data Entry") If [D11].Value "Multiple" Then btnMultipleProperties.Visible = False Else: btnMultipleProperties.Visible = True End If End With End Sub
I was working on a presentation for work where I wanted to build a 'Family Feud' type board to play a game. In the board I am using activex text boxes with code that would hide the text box to reveal the answer underneath or it would show a custom shape (an X in a box) and play the buzzer sound. The code is pretty simple, first I would make the shape visible, then I would play the sound then the shape would be made invisible. If I step through the macro everything works fine, but when I run the macro, you never see the shape. It's almost as if the sound plays before the shape shows up and then it is made invisible again. I tried putting a wait and a sleep command between making the shape visible and playing the sound but that made no difference. If I remove the code to hide the shape at the end and run the macro, the sound plays and then the shape appears. Is there anyway to have the shape appear prior to or at the same time as the sound plays?
Code: Private Sub CommandButton8_Click() Application.ScreenUpdating = True ActiveSheet.Shapes("First Strike").Visible = True Play_Strike_Sound 'The previous line refers to another macro that has the code commented below. The sndPlaySound32 'function is one I picked up from cpearson.com 'sndPlaySound32 "C:\_Fin SysSoundsff-strike.wav", SND_SYNC ActiveSheet.Shapes("First Strike").Visible = False End Sub
I am using the toolbox/ properties method to restrict the scroll area in the sheets of my workbook. However, for some sheets when i keep the right hand arrow pressed, the screen will not scroll to the last column. (i.e. the screen display will not move with the selected cell box)
In the menu via TOOLS-->OPTIONS-->VIEW I am trying to remove the scroll bars from just one worksheet but when unticked, this option affects all of the worksheets in my workbook. Is there a way to just nail this selection down to one sheet via properties?
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
I have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product F1020 F1023 F1025 F1120 F1123 F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120 F1123 F1125
TO
F1020 F1023 F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
For instance I have a formula such as =sum(A1:A9). But imagine that the range is not always till row 9 but depends on the total number of rows that are in the table. How can I change that 9 so that it takes a number equal to the total rows in the table?
The final formula I want is not that simple one. It is actually
I want to change 1047 by the relevant number of rows. Also, I do know how to do it in VBA, but I have a problem with the length of the formula there (not that one, but other bigger than that)
I'm trying to calculate the Depreciation of the fixed asset for some items. I've tried the formulas that came with Excel but i don't know its not working or not give the correct value so I attached a file as an example what I'm trying to have is
1- straight line method along the asset life
2- salvage must be ( 1 )
3- if the purchase date is equal to or before the middle of the month (14-15/02/2004) so the start of depreciation have to start from the beginning of the current month ( Feb) but if the date excess the day 15 ( 16/02/2004) the middle of the month , the the depreciation must start from the next month.
I'm trying to create a vb to get all columns on my sheet to have a fixed width. If I run my sub all columns go back to the set width. But I want the width to reset when the width is changed.
I am trying to create a string of text that grabs info from other cells, which is easy so for example
=A1&A2&A3
would grab all the info from the 3 cells and merge them to create a string, but what I want to do is create a prefixed length.
Lets say A1, A2 and A3 would equal 10 characters in total but B1, B2 and B3 would equal 7 characters, these would be different lengths. so for a visual description I would like them to appear like this
At the moment
01MAIN-HELLO 01DESSERT-HELLO WORLD
Would like
01MAINXXX-HELLO 01DESSERT-HELLO WORLD
This would make both strings the same length and would make it easier for me to export to a custom file that needs a certain length prefix.
We have a charging system that fixes anything under an hour to 1 hourly rate, then after that we charge in 15min incremental blocks charged at 0.25 of an hour now we need to automate it to make it more econmical. The rate is set at the beginning of each job sheet and the times are inserted in order to get the total minutes worked & what to charge, eg: agreed rate per hour = $A. time1 = 11:45am & time2 = 12:30pm which is 45 minutes total however its under 1 hour so its gets charged at the minimum hourly rate of $A. if total time happened to be 61mins then it would be charged at 1hr 15mins which is ($A x 1.25)
I have a sheet with a number of different columns, is there a way that when data is input into a cell in the first column that it time stamps the last column on the same row, and this time stamp is fixed. Then when data is input into the cell below the same thing happens, so i can have a time stamp for each entry.
I'm having problems when trying to apply an auto filter to my data. When I select the critieria from the auto-filter drop down, on any field heading, I get this messgae "Fixed Objects Will Move" about 18 times.
I have a column of values. If a row's value is greater than 0, I want to count it as a value of 100 and add the result. I can get this far: =SUMIF(H11:H12,">0")
...but I don't understand what would come next. What I am trying to do is to use the above formula to total the actual sum of an array and then to also create a second column which assigns a maximum value total based on each row's non-zero result being worth up to 100. Using the above formula as a reference again, the formula that I am seeking would return a total value of 200 if both H11 and H12 contained any value greater than 0. I plan to use these two results then to calc a percentage.
I need to expand my columns to different character widths (fill with blanks) for an Import into an other program, I state the No. of characters in that column and Import. Trim does the complete opposite to what I require, does anybody know if the function exists and if so the syntax for it.
Everytime I enter a number, excel automatically converts it to a decimal number.
I type 1 in a cell (or formula box) Excel returns the value as 0.1
I think it may have to do with the FIX box highlighted to the bottom of the screen. (To the right side of the NUM lock). (I can't paste a screen dump to show the FIX box position). how to remove the FIX box, and/or change excel so that I can enter in numbers normally.
I'm working with a pie chart that has a dynamic range as its data source and a dynamic range as its legend. The chart shows ratios of bought items depending on customer type. So, when you switch from a "Hair" customer to a "Bath & Body" customer, the ratios shift and the legend changes as well (i.e. "Hair - 25%" to "Hair - 10%").
Is there a way to fix the colors permanently so that as the ranges change, the colors remains the same for each category?
I've seen some VBA for it, but it was for data in long columns, whereas my data is in one range in the middle of the worksheet.
I want to grab the value used to sort and put it in a different field.
example
Sort by City
cell location
A1-B1 "Inventory lists for "(CITY)
A3 - A15 San Jose A16 - A30 Phoenix A31 - A35 Portland A36 - A37 New York
I want to take the chosen sort value and put that in the title but can't figure it out because the cell location changes when a different sort value is chosen.