I have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.
[Code] .....
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View Related1. I have to hide rows using checkboxes
2. I have to copy visible rows (not marked ones) to another sheet in the same workbook. So far i have managet to creat this code for hiding/sowing rows:
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
Every time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
View 2 Replies View RelatedI have a table of data with a filter on the top and a sum total at the bottom. Whenever i filter the list the total at the bottom doesnt change. how do i change it so the sum only calculates the visible cells?
View 3 Replies View RelatedI have a workbook that is set to show a form on startup and then the code tells excel to be visible = false. How ever i have disabled the close button on my form therefore i have stuffed my program up and cant edit it at all.
View 3 Replies View RelatedI have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies View RelatedI have a large spreadsheet that I am using multiple drop downs in to sort for
different scenarios. I do not want to use the general data subtotal command
but each time I sort I want to get a total for the visible cells -
I have finished a huge project. The final step is sending emails.
I have a filtered range. The email .HTMLBody is formed using the visiblecells, and forms an object called 'rng'
Only problem is - now I want to add my attachments. Within the visible range, the URL of the attachment is available (column 5).
So need a loop to do for each cel in rng.Column(5)
.Attachments.Add rng.Cells(cel.row?,5)
Can't get the row number of the visible cell to work. Once this is solved I can click the button and let the beast send out 1000+ emails. But at the moment cannot Was also thinking instead of For each cel, could use i = 1 to (last row in visible rng) ?
I have a table with autofilter enabled
I also have a cell that is supposed to show the sum of values in column C, cell C1
But the things is, the sum formula gets the sum of everything in column C.
I only want the formula to add items when it's visible in the table.
If I want to know the total expenses on bond paper, I select bond paper in column D's filter Then the expenses will show up with bond paper but I till get the sum of everything in Cell C1.
I have a need to sum only the visible cells in a row. Certain columns are collapsed depending on the month and there is a YTD colum that I only want to pick up the expanded or visible cells. I found a custom function listed below at Microsoft's website but it only allows for a single range to be entered and I need to pick 12 individual cells, for example A1, C1, E1, etc. There is other information in the cells between and that is why the range won't work. Is there a better way to do this or can this function be modified to allow me to do this?
Function Sum_Visible_Cells(Cells_To_Sum As Object)
Application.Volatile
For Each cell In Cells_To_Sum
If cell.Rows.Hidden = False Then
If cell.Columns.Hidden = False Then
total = total + cell.Value
End If
End If
Next
Sum_Visible_Cells = total
End Function
I'm looking for the row and column number, or number of rows and columns, that are visible in activewindow. Activewindow.visiblerange.row, .column (and .Scrollrow, .Scrollcolumn) are nice but
I prefer not to perform division on pixel height; I'm looking for some count or rowcount but I haven't been able to locate the object.
I have all in place to use formula countvisible, does someone know the formula for showing the maximum number out of those visible / filtered.
View 9 Replies View RelatedI have this sheet:
A B
1
2 1 1
3 2 2
4 3 3
5 2 4
6 1 5
7 2 6
8 3 7
9 1 8
10 1 9
SUM(B2:B10) gives 45
Now I add a filter so all the rows with A = 1 will be hidden. That gives me:
A B
1
3 2 2
4 3 3
5 2 4
7 2 6
8 3 7
But SUM(B2:B10) still gives 45. But it should be 22.
I have a userform which has a calendar in it (created in another userform).
When a user opens the userform, the calendar doesn't show up. But it works fine in my system.
I have already copied the MSCAL.OCX file in the user's system. But still the calendar doesn't show up. What other file do I need to give the user so that the calendar works.
I have created a group of textboxes from the Control Toolbox used to enter data into a hidden worksheet. I used the Keydown Event to Run a procedure and hide the textboxes. After setting the Visible Property of each control to false, the image of the last active textbox remains on the screen until the worksheet is scrolled. The image then disappears.
I have created a great little macro to handle a large amount of data on my spreadsheet that I've been using for several months. It's a shared sheet that is used by many people, but the macro is protected...That being said, something strange has happened that none of my buttons for activating the macro are no longer visible. I can't even create new ones. I get a box outline with a little red X in the upper LH corner. I've verified that the button is in fact set to be visible and set up properly for colors, etc.
I'm not sure what's happened since it happened in a matter of hours...did something get "deactivated" that I need to re-instate?
When I open Excel sheet it doesnt say the name of the file anymore, usually seen above the menubar. For example when I open a file called book.xls it usually says the name in the blue bar on the top left sideof the menu bar, but not anymore. Im sure there is a simple way to restore this but cant seem to find it.
more details:
1. I open blank excel sheet.
2. Within Excel I click on File>Open and browse to the xls file i want to open.
3. I open file, no problem there, just on top of the blue bar it should say the name of the file and it doesnt.
4. This is the case for ALL excel files I open.
5. Opening a file directly by doubleclicking on it is the same problem.
In my VBA Project Editor Window I have a Sheet17 without the normal brackets and a sheet name. Also I do not think there is a sheet 17 in the workbook.
put differntly
I have
Sheet1 (InfoOptions)
Sheet2 (Something)
Where the stuff between brackets the name of the sheet in Excel is.
Also in the " properties" window, if I click on the above sheets it tells me the name is Sheetx etc.
I have a strange sheet that only dislays this
Sheet17
-No brackets AND in the properties window it gives
ThisWorkbook
How do I fix this. I am more than willing to send the workbook via email. I can also, if I may, insert a screenshot of this.
I have already tested - this is not a hidden sheet.
I only need this as a workaround to the 8192 hidden row limit when copy and pasting.
View 4 Replies View RelatedI have a data in which I have inserted a table with headers.
I then filter the type of data I want removed from the table using the drop down
Then goto special, visible cells only, press delete.
Now, the data is gone, but when I select all again to pull up the entire table, the data is gone, but rows are still there. So now I have tons of empty rows in between the rows of needed data. Any way of removing the rows in between as well as the data?
I have a spreadsheet that has many rows of data. I've filtered the spreadsheet, and want to paste a formula so that it appears only in the filtered rows. How can i do that?
View 1 Replies View RelatedI can only view one worksheet at a time with a particular spreadsheet. There are no tabs to click at the bottom of the screen to view the other worksheets. In excel 2007, if I click on View, then Full Screen, I get the tabs (so I can view the different worksheets) but then I lose the menu and formula bar (so when I click on a cell I can only see its contents and not the formula). I need to see the formula that is applied. This has not happened with other S/Sheets, just this particular one. what else I can do to view the worksheet tabs without full screen view?
View 7 Replies View RelatedI have seen spreadsheet where the user has made the outline of the cell border non-visible. This seems like a fairly simple task, but I can't seem to find out how you format this type of border.
View 2 Replies View RelatedI have a spreadsheet that has hidden rows, I want to somehow either delete the unvisible rows or to be able to copy the visible rows to another sheet?
View 6 Replies View RelatedI've setup a worksheet whereby rows can be Autofiltered between a start and finish date via a Userform which (after much mucking about with UK/US dates) seems to be working nicely now. With the results of the Autofilter, i wish to count certain entries (in this case entries that are in column F) in the remaining visible rows.
The Workbook is about 'Cases' worked, and column F relates to how the 'Case' is cleared (Call, Letter, Referral). Effectively I want to be able to count 'Call', 'Letter' and 'Referral' entries once the Autofilter has been applied.
I had a situation in which i need to number the cells which start with the Text "SB" in column B. To elaborate,i want to give a serial number for all the transactions starting with "SB". For this i filtered the data >> Custom>>Begins with>>"SB"(Quotes Ommitted). I want to increment the cells with the serial numbers 1,2,3 and so on only those which contain SB. I tried using it with the ROW Function.
View 5 Replies View RelatedI need to insert a formula to count only the visible rows in a database. I currently have =row()-6 etc. but when I hide certain rows they are included in the count. What formula can I use to ignore the hidden rows and only show the live rows?
View 10 Replies View Related