Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 RepliesI am trying to write the contents of a worksheet to a notepad file. Also, the worksheet has some hidden columns.
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
I have filtered a worksheet and want to only total the data in the columns that are visable, is this possible?
View 4 Replies View RelatedI would like to count all of the cells in a filtered range which contain specific text. These cells will also contain numbers.
The cells either contain one of the following
EXA 130
130
EXB 130
The number could be any number (not just 130) the text will only be EXA or EXB
So I am looking for the number of cells in a filtered range (visible cells) which contain EXA (plus any number)
SUMPRODUCT(SUBTOTAL(102,OFFSET(X8:X3000,ROW(X8:X3000)-MIN(ROW(X8:X3000)),,1--(X8:X3000,"*EXA*")
The above doesn't work and I have attempted lots of variations of this with no luck.
I have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.
[Code] .....
Is there way to do this? I did not find it.
View 5 Replies View RelatedI have a worksheet that has several hidden columns and wish to have the EntireRow.Autofit apply to all rows in the current region based on visible columns. After using the WrapText method on all visible cells, one of the hidden columns with a lot of characters causes the entire row to be much larger than desired. Is there a way to use EntireRow.Autofit to only expand the height of each row in the current region as necessary based only on the visible cell contents in that row?
Set AllCells = ActiveCell.CurrentRegion
ActiveCell.CurrentRegion.Select
With AllCells
.Font.Size = 6
.Font.Bold = False
.WrapText = True
.EntireRow.AutoFit = True
End With
I have this sheet:
A B
1
2 1 1
3 2 2
4 3 3
5 2 4
6 1 5
7 2 6
8 3 7
9 1 8
10 1 9
SUM(B2:B10) gives 45
Now I add a filter so all the rows with A = 1 will be hidden. That gives me:
A B
1
3 2 2
4 3 3
5 2 4
7 2 6
8 3 7
But SUM(B2:B10) still gives 45. But it should be 22.
I do hav a sheet in which i do hav some column;s n data
Worktype
Metrics
April
May
June
in work type few rows are hidden which i don't need what i need is i want to populate only comman metrics in other range named metrics i had build a macro for this and that's working fine but the problem is it also reads metrics from hidden rows too. i had tried a loop in which i had placed as hidden column property condition.
Starting from D6 to the end of the data (could be F6 or AA6) I need to sum the total, but only if the column is visible.
View 9 Replies View RelatedI am looking for a bit of code that will count the number of visible columns either. I have the following which is missing the code to establish if the range is visible or
Code:
Do Until rngVisibleColumnCount.Column = Range("HRISData_RoleError").Column
'Code to establish if visible
intVisibleColumnCount = intVisibleColumnCount + 1
Set rngVisibleColumnCount = rngVisibleColumnCount.Offset(0, 1)
Loop
In the code below, I found out how to make the column widths automatically adjust on a worksheet based on the text entered. This code works great but it also reveals the hidden columns on the worksheet. Can i prevent it from doing that?
Private Sub Worksheet_Change(ByVal Target As Range)
With Me.Cells
.Columns.AutoFit
End With
End Sub
Found here: Automatically Adjust Row Height & Column Width
I have a spreadsheet that has hidden rows, I want to somehow either delete the unvisible rows or to be able to copy the visible rows to another sheet?
View 6 Replies View RelatedI need to insert a formula to count only the visible rows in a database. I currently have =row()-6 etc. but when I hide certain rows they are included in the count. What formula can I use to ignore the hidden rows and only show the live rows?
View 10 Replies View RelatedHow can I count the no. of rows of a selection which has some hidden rows...I want to count only the visible rows
View 5 Replies View RelatedI have a sheet with a couple thousand rows of data. I need to calculate the subtotal sum for the first 50 rows of auto-filtered data. I can't seem to figure out the formula that I would need to have to do this automatically. If for example my filtered data the 50th visible row is row 1300, currently i can write a formula "SUBTOTAL(9,Q1:Q1300) but if the filtering changes I would have to go and change the formula to replace Q1300 with QX, where X is the new 50th visible row number. I know there must be at least one way to do it automatically but it seems to be beyond my current skill level.
View 3 Replies View Relatedto put hpagebreaks when one or more checkboxes are checked. For example when CheckBoxChange and CheckBoxDisco are checked, hpagebreaks are put below the Change data and Disco data.
The checkboxes also hide rows of data when checked.
I have two macros that hide or unhide rows. Now I need a way to count only the non-hidden rows. The total needs to be visible in each visible cell of a single column (presently column AW).
Example - if rows 2 and 3 are hidden using the "Hide Row" macro, the following would happen;
Row 1 is visible, so it is numbered "1" in AW1.
Row 2 is not visible, so it either has no number or freezes at "1" in AW2.
Row 3 is not visible, so it also has no number or freezes at "1" in cell AW3.
Row 4 is visible, so it is numbered "2" in AW4.
And so on.
It doesn't really matter what is in the AW cell in hidden rows because I am not totalling rows. What I am doing is using it to define a print area. If a page has to be 70 rows long, another macro uses column AW to work out where to put page breaks (after row 70, 140, 210 and so on). If twenty rows were hidden on page 1, without the above solution, the printed page would only be 50 rows long. A solution to the above problem will always make sure only visible rows are counted when calculating where to put page breaks.
I am using Excel 2000.
1. I have to hide rows using checkboxes
2. I have to copy visible rows (not marked ones) to another sheet in the same workbook. So far i have managet to creat this code for hiding/sowing rows:
I am trying to create a daily task activity sheet. I would like to know, how to make the columns visible and invisible as per the selection from previous column.
For eg:
Column A has a list which has values 'TC creation' , 'TC modification', 'System Test' etc.
Upon selecting TC creation, i need to make a column visible ie 'total tcs created'.
Upon selecting 'TC modification' i would have to make the previous column invisible and make a new column visible for entering no of tcs modified.
Upon selecting 'System test' the other columns should go invisible and make other 3 columns visible for no of tcs executed, no of tcs passed, no of tcs failed etc...
I need a macro to start at cell A11 and select across 10 columns and down to the Lastrow (last row with any data).
There are hidden columns after column D so it CANNOT have any columns hardcoded except for column A.
This selection then needs to be set as a single print area to print out on 1 page. I have already set Rows 1-10 as a title area to print at the top of each page.
Code i currently have is:
[Code] .......
I just need it to now go across 10 visible columns and set as a single print area.
I have the following workbook that has potential to display large amounts of text, particularly in the NOTIFICATIONS section. Despite the cells having Wrap Text selected, only a single line of the text is visible while the rest is only displayed when the cell is clicked.
View 7 Replies View RelatedI created a spreadsheet a while ago filled with data. It's password protected so nobody but me can edit it. But when I open it, I see only gridlines and no data. If I click on a cell I can see the contents up in the Formula Bar, but the sheet itself is blank. I've sent it via attachment to other people and they are able to view it, so it seems my Excel settings are doing something to me. I've tried so many things, but can't seem to work it out.
The text color is NOT white, the background is not the same color as text, etc. I dont know what else to try!!
I have a spreadsheet that shows is a break in the enumeration of the rows. To elaborate, rows are enumerated from 1 to 15, then after row 15 is row enumerated as 25 and continues to be enumerated as expected. In other words:
1, 2, 3, 4, ..., 14, 15, 25, 26, 27, ...
How can I get back rows 16 to 24 be visable again?
I have a Userform that it makes possible to step through the the spreadsheet. It works with Previous and Next buttons. The Userform opens with a doubleclick. This works fine, but when I use an autofilter and the criteria reduces the number of rows, the Userform shows the hidden rows as well as the filtered rows. How could it be made that it only steps through the visible rows?
View 2 Replies View RelatedI have a Userform that allows you to step through the the spread sheet that works with Previous and Next buttons. This works fine.
When I use an autofilter where the criteria reduces the number of rows the Userform shows the hidden rows as well as the filtered rows. how can I make it just show the visible rows.
I have a function to count unique IDs
=SUMPRODUCT((A1:A30000"")/COUNTIF(A1:A30000,A1:A30000&""))
and it works OK.
How can I count the IDs only in the visible rows after applying a filter?
I have a spreadsheet with over 20000 rows of data and have used autofilter to find the information I want to check. Once I have these rows I want to check whether the cells in Column AE are higher/lower than the number (in this case '3'). Once it finds a cell that meets this condition then it copies and pastes the whole row so that I can review the entry.
The problem I'm having is that it doesn't work all the time. I've tested it a number of times in break mode & played it throughout and it works as expected, whereas other times it picks up the top row (header) and duplicates it or it picks up hidden rows and pastes them in sheet 2 if the condition is met. I want it to just pick up rows if they are visible (using the filter) if the condition is met.
Here's what I have so far:
Code:
Sub Lvl3v2()
'Level 3
Dim i As Integer
Dim r As Range
Dim c As Range
i = Worksheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row
[Code] .........
I can't understand how Delete works when applied to a table.
Here is my table:
Number
Letter
Test
[Code]....
If I use "EntireRow.Delete", I have an error.
If I use "Delete" only, it works for A and B, but for C, it suppresses the Letter column.
By the way, I don't understand why I have to include header (Table1[[#Headers],[#Data],[Letter]]) when I filter to find unique letters at the beginning of the script.