Backgroup Colors :: Count Them All And Put The Result In A Cell
Sep 8, 2008
I have my cells that are in a yellow background color.
I would like to count them all and put the result in a cell,
Can I do that using an Excel function? like countif?
View 9 Replies
ADVERTISEMENT
Feb 6, 2014
Like u see in attachment i have products in cells wich are painted in different colors. I need to compare two numbers of different product, and write result to column "Type D,C,B". If one of two products is without color/white or they are not the same color then result is always "D", if both products/cells have same color and different number then results is "C", if the color and number is the same then result is "B"
Below cell B2 I will write numbers by hand, when I finish and start macro it will compare first cell B2 and B3 and write result to C3, then compare B3 and B4 and write result to C4 and do that until there is any number in column B:B.
Attached File : excel help.xlsx‎
View 8 Replies
View Related
Feb 22, 2010
using =ColorFunction to count cells highlighted in different colors.
Is that function available in Excel 2007 under a different function name?
View 9 Replies
View Related
Jul 7, 2013
My pallet lost color-coding - if I hover over each little scare it displays the names for the colors and if I click on them they color the cells with the right colors, but the palette itself lost the visual display of colors except for 8 colors: black, blue, red, magenta, yellow, cyan, and white.
I use color-coding of cells a lot and I find it difficult to work without visual clues. At least the hover-support allows me to get the work done, but with difficulty.
View 12 Replies
View Related
Jun 10, 2014
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
View 3 Replies
View Related
Jul 7, 2009
is there a way to get a formula to count a zero if it would normally return a negative value?
example
result = 100
target =300
result = -200
but i want it to show as zero
does this make sense?
i'll bet its really simple but i'm stuck
View 3 Replies
View Related
Mar 20, 2014
I need some code to search "database" sheet column B:B for value "SearchString" and then either select the cell (0, 86) to the right or count the rows so I can move the the cell in the correct row.
View 14 Replies
View Related
Oct 15, 2008
I am in the process of reformatting an excel workbook to act as a review tool for different factors in a process. Part of my redesign includes the use of coding that creates different cell colors based upon the cell contents. The new workbooks will be used to handle existing data for this year. I have developed a process macro to open an existing workbook and copy and transfer the original data worksheet into the newly formatted workbook. The data gets transferred to the new worksheet and the resulting workbook is renamed and saved, Heres'' the rub... the newly saved workbook is missing all of the coding for the worksheets... apparently this is a MS bug.
Has anyone figured a workaround for this. One thought I had is to open both( new and old )workbooks and rather than move/copy , i would transfer the data using cell references.
View 5 Replies
View Related
Apr 3, 2012
Trying to format cells b9 through b 24 and cells c9 through c24 to change from white to a light grey color by clicking the mouse button once. so one click white, another click grey. The color grey I need is white, background 1, darker 25% in the autofill field in excel. I have search other forums they all lead to changing the code, I did this already. just copy pasted a code I found but all cells were selected to change a bright green.
View 3 Replies
View Related
Jun 27, 2012
I am making some grids which will have a series of numbers in the individual cells. But I can't figure out how to change the colors of the digits. If I change one digit to Red; all the numbers in that cell change to Red. Whereas I would like to have them as Red,Green,Black,Blue,etc.
View 3 Replies
View Related
Jun 25, 2013
I'm trying to update a workbook with a new look and want to change the cell color based upon what the cell color currently is.
I'm having problems with the code that I created. I just can't seem to get the syntax correct for the code.
For the code below, my Range of A5:D5 is just a test range where each cell should change colors. When completed, my range will be much greater.
Code:
Sub ChangeColors()
Dim Cell As Range
For Each Cell In Range("A5:D5")
[Code]....
View 4 Replies
View Related
May 23, 2009
I have read the instructions for conditional formatting and I don't think that is what I need. I have 10 diff year 2005,06,07 etc. I want each cell with with a diff year to turn a diff color. Like I want 2005 to be red and 2008 to be blue.
View 9 Replies
View Related
Mar 17, 2007
I'm trying to have change if the date on it is passed "now()". I am already using the 3 conditional formatting fields and need this one and another one. Here are 2 problems I seem to be having.
First - the code below only works if I change the date on the cell. I want code to either work with Worksheet Active or any other way so the user does not have to redo the date’s everyday.
Second - a record might have conditional formatting already. Is it possible for the target cell in this code can show this color while the rest of the row shows the color of the conditional formatting?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("G1:G2000")) Is Nothing Then
Select Case Target
Case Is <= Now()
icolor = 39
End Select
Target.Interior.ColorIndex = icolor
End If
End Sub
View 7 Replies
View Related
Jun 24, 2008
I'm trying to find a formula that will give me a count of all programs by month that have an evaluation result. So, in column A1:A24 I have a list of programs with. In cell A25, I have the total number of programs. In column B1:B24, only 7 of those programs have evaluation results, some of the rows are blank.
I know that I can get a sum of the programs by month, but how do I only get a count of those with an evaluation result? What formula can be used to get a year to date (a running count), not a count based on 12 months? Meaning that we would need a year to date for each month, so currently for October to June (based on fiscal). If we based it on year to date, then I think we would have to divide be 12 and that would make the results inaccurate.
View 2 Replies
View Related
Apr 22, 2014
I need to change the color of a specific cell when conditions are met in a different cell and it seems like it may be beyond the scope of simply applying conditional formatting. What vba code would look like in proper syntax to make the following statement true. IF cell value Q4 is >=cell value S4 AND cell value R4 is <100 Then cell Q4 turns red and IF cell value Q4 is >= cell value S4 AND cell value R4 =100 then cell Q4 turns green. it may also be useful to know that the "cell values" in this example will be dates and not straight values. this may be possible to do using conditional formatting, but i cannot find a formula that works.
View 2 Replies
View Related
Mar 6, 2009
when I copy a worksheet from one workbook to another, the colors on the sheet in the destination workbook, become dull/faded. They actually change from the original colors to some off colors. I copy by selecting the source sheet, hold down ctrl key, then drag from one workbook to another). Also, is there a way to get the sheet back to the original colors.
View 2 Replies
View Related
Jun 17, 2009
How do I make the colors of certain cells on my spreadsheet static and unchangeable by cell data that may be copied and pasted from other cells of different color? Is this possible?
View 6 Replies
View Related
May 22, 2014
I have a few buttons on my page that I would like to change colors depending on the value in cell AI1. Right now this is the code I have:
[Code] .......
What I would like is to add formatting for "rounded rectangle 4" as well. if the cell = 1, number 4 changes color, if the cell = 2 both change color, and if the cell =3 then only 5 changes color.
View 2 Replies
View Related
Apr 16, 2009
If cell A1 is the same thing at cell B15 then I would like cell A1 to turn RED. Is there a way to do this?
View 5 Replies
View Related
Dec 9, 2011
I need to change the colors of each tab based on the cell value in G132.
1>Green
1
View 3 Replies
View Related
Sep 8, 2009
We have a workbook with over 20 worksheets, each sheet with one or more tables in it. Several people use the workbook and we have decided that when someone changes a cell, they should mark the changed cell by filling it with blue using Format Cell. We have then nominated one person at end of each week who will check all the changes made during the week and either approve or reject them. So her task is to find all the blue cells, check them and then take the shading off.
What I would like to do is to create a macro to help her. I would like the macro to automatically identify all the blue cells in the workbook and give her a list of these cells. I wonder if someone could give me direction on a couple of things:
1) The command in the macro that would return whether a cell is shaded blue
2) The way in which I could cycle through all the content of each worksheet. I'm thinking worse case I would have to write instructions to go to each sheet, and then do an outer loop to go through each row, and an inner loop for each column (and the number of active cells varies by worksheet) -
View 9 Replies
View Related
Oct 17, 2006
Within the Workbook events there is a "Before_Print", however I also need something like "After_Print" which does not exist (as far as I can tell).
I have several rows of data which alternate colors. When I print it I want to take out the fill (so as to save ink) - which I can do in the "Before_Print" event. [No problem.] However, once it is done printing I need to restore the alternating colors, but I cannot think of any event or trigger which would enable this.
I have thought through several things and the closest thing I can think of is setting up a timer. But there is of course no way to now how long to set it for. [Before/After Save also has the same "issue".]
View 9 Replies
View Related
Oct 30, 2006
i am using a set of VB codes that was kindly provided by "dr". Please refer to the link below.
Highlight-Select Start Date To End Date
However, I am facing problems on how to delete or unfill the cells that are "coloured and filled with booking reference name" (i.e. being booked by the user).
In another words, currently, once a booking is made, the blank slots would be coloured to red and would reflect the customer name in those slots (with the use of dr's VB codes).
Comes the next day, if that booking needs to be cancelled, would the user be able to "delete" that booking that was made (i.e. uncolour that slot plus remove the customer name) without having to automatically go unfill the cells and delete the text in the cells?
View 5 Replies
View Related
Jan 17, 2008
I am trying to write a macro that can copy the shading from another cell for me automatically. I would like to look for certain text strings within a serial number, and when found, copy that cell's shading in another cell.
I am using INDEX, MATCH to copy the corresponding value needed, but that doesn't give me the shading...
View 6 Replies
View Related
Feb 20, 2009
Is there a way to count the total number of rows with data (excluding title row at top and Auto-Sum row at bottom) and put the result in L2?
View 14 Replies
View Related
Jul 25, 2013
I was wondering if it would be possible to filter by two consecutive cell values or colors. For example if I have in "A"
X1 (red fill)
X2 (blue fill)
X1 (red fill)
X3 (xx fill)
X3 (xx fill)
X1 (red fill)
X2 (blue fill)
X4 (aa fill)
I want to be able to filter so that the consecutive cells for x1 and x2 show up or red followed by blue.
So when I filter it will only show rows 1 & 2 and 6 & 7.
X1
X2
and there would be many of these values in the spreadsheet.
View 10 Replies
View Related
Oct 29, 2008
so what will happen is that the number of rows will continuously increase as the groups of data (Labeled Group #) increases. The data within each group will vary from time to time so some groups may contain only one line while others may contain multiple lines. I have included an attachment that illustrates what I'm trying to achieve. When data is entered in Column A under "Q," the adjacent empty cells in Columns B-F (labeled "R"-"V") will turn red. This is the part I have (i.e. Group 2).
View 4 Replies
View Related
Apr 30, 2009
I have a sheet with alternating colors (gray,white) for the rows. This makes it easier to read each individual rows data, just like some printer papers. The problem i have is when i sort the data it takes the background color with it and i end up with a mess. does anyone know how to get around this.
View 2 Replies
View Related
Jan 21, 2012
If a cells value is between to numbers then I need to change the color of that specific cell to green otherwise cell is to turn red. Also all cells without a value defaults to yellow.
View 9 Replies
View Related
Jun 19, 2009
I know this can be done, as I have seen it before, but can't seem to figure out how to replicate it.
I have a speadsheet in which I have a drop-down box for a certain column's values. How do I automatically have each independent row's background color change dependant upon the value selected in that row's drop-down cell box (and update color automatically if a different drop-down selection is made later)?
For example:
Row 1: Cell C Drop-Down Value = "Yes"...change row color to GREEN
Row 2: Cell C Drop-Down Value = "No"...change row color to RED
Row 3: Cell C Drop-Down Value = "Maybe"...change row color to YELLOW
View 9 Replies
View Related