I would like to combine variables and paste them into one cell. For example, I have a city stored in the variable "city", a state stored in the variable "state", and the zip stored in the variable "zip".
So I need something like...
Range("A1")=city, state zip
i am looking at creating a combine chart for 3 variables.how to achieve that?
TeamSubTeamsScore
A X 20
Y 25
B X 10
Y 20
C X 15
Y 10
I would like to use a macro to do the following...after selecting a cell eg C12 the macro would copy its contents and paste them into S12. However I would like it to be able to do this with any row I select and column "S" contains links to another worksheet, for example... C12 contains 123456, S12 contains =654321!C41.
I need the numbers to be the same in both cells. So after the macro has run C12 would still be 123456 and S12 would now be =123456!C41. The numbers in the cells and the rows are variable (columns are always the same, "C" & "S").
Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
I am in need of a way to pull keywords listed in B2:B10 from text in A2:A10 and then those pulled keywords combined in cell C11.See attached document. So I have colors for keywords in column B and some random text in the column A including the keywords in parenthesis. Is there a way for a formula to find all keywords in A2:A10 and then list them in cell C11 with commas in between.So the result would be one cell C11 showing BLUE,GREEN,BLACK,ORANGE, etc.I have been trying to mess around with index and match and while I could get one to pull up I don't know how to combine it.
Keyword Range.xlsx
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
which will calculate value of a cell when one of the variables has been changed?
To illustrate what I have in mind, an ecxample:
* User can add values to cells using UserForm
- Component name (to Cell "A1")
- Component price (to Cell "B1")
- Component quantity (to Cell "C1")
[Code]....
I've been struggling with the following problem for hours now and getting nowhere fast.
I've got '=(100/X6)*L6)' in cell M6 which gives my percentage fine but I need to round to the nearest integer with '=ROUND(M6,0)' Question is how do I combine both functions to provide the nearest whole number in M6 ??.
I have to combine two value and use them as a cell name,
So far this gives me the cell name =("A"&A3) where A3 has a value of 2 and the autcome for the code =("A"&A3) is A2 but I wanna use that as the cell name for my formula and not have it projected as a value only if you see what I mean.
Basicaly the reason for this is that when I write a formula in the cells and drug it down it moves 3 numbers at the time as the colomn H is split in 3 per row, so I have for example
=(B1)
=(B4)...
and so on, where I want it to be
=(B1)
=(B2)...
Therefore I am using the colom A to assign a row number, that the reason for the formula A"&A3
but when I try to write a formula it doesnt work as it doesnt use the outcome A2 as a cell name but as a text value only
I have just two columns, one with numerical codes (A), the other ones with text (B).There are duplicate codes with different values, for which I would like to be able to combined their text values on a single row.
A | B
xx | text 1,
xy | text 2,
xz | text 3,
xz | text 4,
xu | text 5,
...
to be formated to:
A | B
xx | text 1,
xy | text 2,
xz | text 3, text 4
xu | text 5,
...
The resulting column B can be with/without space delimiter between the text values (there is a coma after each text value)
I have a list of columns filled with data, say b thru d. What i want to do is combine the cells in the same row (b thru d again) and put that value in column a like this : valueb-valuec-valued
I want to keep going down rows until there is no data left and then I want it to stop. So far I have this (which doesn't work at all, as usual)
I am trying to combine the data in a row into one single cell.
For example,
B2= A1 & A2 & A3 .... until the end of the values in column A
I need this to be a macro so that when I enter values into column A manually and press the macro button, it will combine them into cell B2.
I would like to have cell A3 contain two different formulas. I may be doing this wrong, so here is what I would like to do:
Cell A1 will contain a number that will change from month to month, but will need to show as $0 until then. Cell A2 will contain a fixed sum number from month to month Cell A3 will contain the difference between cell A1 and A2
I wouldl like cell A3 show as $0 until a number is inputted into cell A1
A1
$0
A2
$2000
A3
$0
The formula I have in cell A3 is =SUM(A2-A1), but cell A3 shows $2000. I remember doing this before, cut can't remember the exact formula. Something like =if(A1
i want to creat a sheet doing the following
enter the phone numer in cell a1
enter the phone break down hour in cell a2
enter the phone break down date in cell a3
combine the cell a2 & cell a3 in cell a 4
enter the phone fixed hour in cell a5
enter the cell fixed date in cell a6
combine the a5&a6 in cell a7 subtract a7-a4 and show the result in hours
Creating a macro that is a combination of other cell values. the cell order is listed below:
C57 = contains a unique number that will change from time to time eg. 1234
H57 = 1 (this will always be the value of 1)
N57 = contains text eg. AUDUSD
V57 = contains text eg. BS
AB57 = contains a number eg. 1.8954
AH57 = 0 (this will always be the value of 0)
AN57 = contains a number eg. 0.01
AS57 = contains a number eg. 1.7954
AZ57 = contains a number eg. 1.9954
BH57 = conatins either 1 or 0 eg. 1
the cell needs to contain the above examples like this :
BT57 =OpenPosition(1234,1,"AUDUSD","BS",1.8954/0,0,0.01,1.7954,1.9954,1)
This will be needed for a total of 14 rows (57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83)
The cell with the results cannot have any cell references contained in the end results and must be formatted as above so that the add in program can read and pass on the information.
In column A I have product names, in B I have product categories and in C:H the product categories from column B are titles and the name of the subcategory is written in the cell. Because there are mutlipule sub categories that a product can belong to the report produces mirrored lines with one sub category on each line. What I need to do is combine all of these subcategory entries into one cell separated by a comer (,).
View 2 Replies View RelatedI have a column of data that will vary in length and I'm trying to write a macro to combine it all into one cell. Basically I need to do the equivalent of entering "=A1&A2&A3..." for the entire column. I started by creating an array string variable and have the data in grp() but now I'm stuck trying to figure out some sort of loop to keep adding onto the same cell or something
View 6 Replies View RelatedLet's say there is a name (Big Bird) in cell A1
Let's also say that cell B1 has =Today()
How can I make cell C1 = Big Bird 3/13/2013?
I want to combine both an 'if' and a 'vlookup' within a single cell. So I want to say if the value in cell a1 can be found in columns c1:d100 then return a 'yes' if not return a 'no'. How do I do this
View 7 Replies View RelatedIs it possible to combine the results from 1 Text Box and 2 Combo Boxes to return to 1 Cell?
For example, i am using this code to write username to Sheet 2
Sheet2.[c9].Value = txtFullName.Value
and this code to write account number to Sheet 2
Sheet2.[d8].Value = txtAccountNumber.Value
BUT - i would really like to take the Value from txtFullName and take the Vaule from txtAccountNumber and combine that into (1 cell only) with space separators please.
Example : (username & account number combined)
Slim 12345678
Column A has the following values:
au:asd
au:qwe
au:zxc
etc
I want to combine the text from each cell into a text string so that each cell's text is separated by a comma, thus:
au:asd,au:qwe,au:zxc,etc
I can do this with a formula,
=a1&","&a2&","&a3
but this may exceed the 255 character limit when the text string needs to be transferred to a query.
I have so data I am trying to combine based on count value of investment on Col A. If it appears more than once on col A then I want the col B values on col D. I have macro that works but I need make sure if Col B have any TRAC and TRL1 then I want to add that on Col D. For example so Col D1 would be EURX, TRL1 at 83.50, FTID and Col D5 would be TRAC at 87.88, Markit. Below is the macro.
View 9 Replies View RelatedI have a document that has 3 colums.
Complete Name | Surname | First Name
The Complete Name is currently blank. The others just list the users Surname and First name. In the Complete name I need it to have Surname,Firstname - for example
Complete Name | Surname | First Name
Jordan,Michael Jordan Michael
Is there a Formula (Not Macro) that I can use to combine the Surname and First name cells to populate the Complete name cell with the surname,first name???
I'm having problems with the MATCH function. If I use =MATCH(A2,'c:myfile.xlsx'!MyRange,0), it works. A2 is the value that I want to look up. 'c:myfile.xlsx'!MyRange is the full path of a range in an another XLSX.
However, if I assign the file name to a cell and try: =MATCH(A2,A3,0). where A3 has the exact same path as the line that work, Excel returns #N/A. I also tried a match on a range in the same tab of the same spreadsheet, and it didn't work. Is it possible to do what I'm trying to do? The file location of the external XLSX is going to change, and I wish I could just update one cell rather than every single cell that contains a MATCH.
I have 3 variables right now...
Dim celadr As Range
Dim cLetter As String
Dim avgRow As Integer
and one line of code reads:
celadr = Range(ColumnLetter(LastScoreColumn) & avgRow)
When I mouseover columnletter it shows "H" and when i mouseover avgRow it shows "2"... this info is right but I think the problem may be trying to combine a string and an integer value as a range. How can I do this so that celadr is the range H2?
What I'm trying to do is use a variable NumberOfRows (which is defined as an integer) in this following code, but the problem I get is that the NumberOfRows isn't being inserted.
Let's assume that NumberOfRows = 15.
What I would expect to be in cell B1 is =sum(H5:H15), but what is getting placed there is =sum(H5:HNumberOfRows) which of course doesn't give me anything. I'm sure this is an easy syntax thing, but I just can't seem to get the right combination.
Range("B1").Formula = "=Sum(H5:H&NumberOfRows)"
I have a spread sheet that has various references
on the same sheet
on a different sheet ( in same workbook )
on a different sheet ( in a different workbook )
If I click on a example cell it might say
Code:
=5*C4*$D$1-Sheet1!C9
Is there a way for excel to be able to iterate through these separate variables ? and know if the reference is on the same sheet ?
Say I wanted to evaluate the references on other sheets ( replacing the link with the value )
So if Sheet1!C9 contained the value 10 the formula would be replaced with
Code:
=5*C4*$D$1-10
Split From Copy Non Null Cells In Column To Another. I'm trying to copy some of the results. How do you combine two variables with text into one cell. For example i want range("a1") = var1"."var2 so it would display var1.var2 if var1 = var1 and var2=var2
View 5 Replies View RelatedI need to know if it is possible to combine these 2 formulas (1. (RIGHT(C23,0)&RIGHT(C23,4)) and 2. LEFT(E23,2)&":"&RIGHT(E23,2)
into a single cell. I have a date time group that is in text format. I need to take the last 4 digits (the time) and pull it out into another. Then take that cell and convert it into an actual time ie 2:30.
example: 01may2014 0831 first formula pulls the 0831 into another cell. then the 2nd formula converts it into a time 8:31.
After this occurs, I can then subtract times from different categories in my spreadsheet.
My, problem, is that I cannot combine the two formulas. They work great by themselves. I am just trying to make formulas more compact and hopefully more efficient.
Is it possible to combine search results into a single cell?
On my spreadsheet I'd like to select from 4 columns and combine the result into 1 cell. I'd like to search on equipment number in column K that meets a condithion in column H, if this is a match I'd like to show the result date in column P and the duration in column R. Columns P & R shown in 1 cell...
Sort of like this... if "K" = "CV537" and "H" = "0" then show the resulting date from "N" and duration from "R" in one cell somewhere.
Possible?